CarProblemsDB

2005 Ford Focus exterior lighting problems

20 owners reported exterior lighting problems — 5% of all 441 complaints about the 2005 Ford Focus.

Exterior lighting complaints by Ford Focus year

20185
20179
20168
20153
201410
201314
201226
20113
20103
20091
200714
20066
200520
20047
200315
200212
200131
200059

What owners report

Mar 26, 2021electrical system, exterior lighting
Fuse continued to blow out causing entire left side of lights from front to back to turn off until new fuse replaced old. Was connected to continued lifting of hatchback on wagon model. Electrical harness was arcing and insulation flaking off and would have caused a fire had not the harness been replaced. This had been on and off for approximately 2 years starting with blowing… Read more

Fuse continued to blow out causing entire left side of lights from front to back to turn off until new fuse replaced old. Was connected to continued lifting of hatchback on wagon model. Electrical harness was arcing and insulation flaking off and would have caused a fire had not the harness been replaced. This had been on and off for approximately 2 years starting with blowing out the bulbs then the fuse started blowing out in jan 2021. Midas replaced harness this march. Car is a 2005 Focus wagon,

NHTSA complaint #11404992
Apr 20, 2020exterior lighting, seat belts, engine

Motor mounts are bad and makes the engine rattle and vibrate tail light will not work I've changed fuse bulb and sockets still nothing and driver seat belt gets stuck

NHTSA complaint #11321646
Jun 13, 2018exterior lighting, air bags, seat belts
Bought a 2005 Ford Focus in april, 2018. Told sales man that airbag engine light remains on. Was told is ok. On 6/112018, called customer service Ford cooperate spoke with a lady. She ask for VIN number, I gave it to her. She said 2005 Focus has no airbag recall. I told her that air bag light stays on since we bought the car. She didn't take interest on that. I asked her what… Read more

Bought a 2005 Ford Focus in april, 2018. Told sales man that airbag engine light remains on. Was told is ok. On 6/112018, called customer service Ford cooperate spoke with a lady. She ask for VIN number, I gave it to her. She said 2005 Focus has no airbag recall. I told her that air bag light stays on since we bought the car. She didn't take interest on that. I asked her what company made 2005 Ford Focus airbag? She would not tell me. I called local Ford dealer in wesley chapel fl. Told service tech same thing that I told cooperate of engine light airbag always stays on. He too said is nothing. That VIN number is no recall. I asked him as well which company put airbags in 2005 Focus, was it tahkata? He too wouldn't answer me. So I email mr. W.Ford to explain above situation with airbag light and who placed air bags in 2005 Focus. Have not heard from him or his office, explained to mr. Ford, that airbag light being always on and his dealers want to charge me $200 to check engine light is absurd. When this is a national safety recall. That we as their paying customers deserve an answer and better treatment. Can you please tell me if this is a safety violation? Would like to hear from you. Thank you. [xxx] information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6).? *pm

NHTSA complaint #11101652
Mar 23, 2018electrical system, exterior lighting

Hatchback wiring harness between body and hatchback, has multiple wire insulation failure and wire breakage causing fuses to blow and non-functioning parking lights, reverse lights, break lights, instrument column lights, and uncontrolled release of electrical trunk while driving.

NHTSA complaint #11080996
Aug 15, 2016electrical system, exterior lighting
Tl* the contact owns a 2005 Ford Focus. The contact stated that the middle brake light stopped working due to the wiring harness in the hatchback. Also, the lock on the hatchback did not work properly and the harness leading to the battery needed to be replaced due to the failure within the hatchback. The vehicle was taken to an independent mechanic and repaired. The mechanic… Read more

Tl* the contact owns a 2005 Ford Focus. The contact stated that the middle brake light stopped working due to the wiring harness in the hatchback. Also, the lock on the hatchback did not work properly and the harness leading to the battery needed to be replaced due to the failure within the hatchback. The vehicle was taken to an independent mechanic and repaired. The mechanic stated that the harness for both the battery and hatchback needed replacing due to the failure of the middle brake light. The manufacturer was not notified of the failures. The VIN was invalid. The failure mileage was 187,000.

NHTSA complaint #10896000
Apr 19, 2015exterior lighting
I just purchased this 2005 Ford Focus. As I was checking things out, I noticed the back up light (reverse) were not working. I checked the bulbs and fuse. All was in order. I did some research on the internet and it appears this seem to be a chronic problem with the transmission mounted signal switch on the Ford Focus, as there are several reports referring to this problem. … Read more

I just purchased this 2005 Ford Focus. As I was checking things out, I noticed the back up light (reverse) were not working. I checked the bulbs and fuse. All was in order. I did some research on the internet and it appears this seem to be a chronic problem with the transmission mounted signal switch on the Ford Focus, as there are several reports referring to this problem. If I had not performed the check, I would not have known the back up light were not functioning. *tr

NHTSA complaint #10706546
Mar 25, 2015exterior lighting

Bulb melts housing. *tr

NHTSA complaint #10701722
Jun 15, 2014electrical system, exterior lighting
Turn signal stopped working. Removed rear tail lenses to replace all the bulb and found brake/turn signal socket fused to interior portion of tail lens inhibiting removal due to heat warpage. Will contact dealer for replacement sockets for right and left sides and lens replacement for right and left sides. This should be a recalled item due to hazard of no turn or brake… Read more

Turn signal stopped working. Removed rear tail lenses to replace all the bulb and found brake/turn signal socket fused to interior portion of tail lens inhibiting removal due to heat warpage. Will contact dealer for replacement sockets for right and left sides and lens replacement for right and left sides. This should be a recalled item due to hazard of no turn or brake light and poor design to allow bulb to produce enough heat to cause thermal reaction and possible fire hazard. *js

NHTSA complaint #10598378
Jun 9, 2014electrical system, exterior lighting

Tl* the contact owns a 2005 Ford Focus. The contact stated that the instrument panel, overhead dome light, rear windshield wiper, and rear exterior lights failed without warning. The dealer and manufacturer were notified, but the vehicle had not been diagnosed or repaired. The failure mileage was 135,000.

NHTSA complaint #10597047
May 16, 2014electrical system, exterior lighting, service brakes
This is the third time I had to place front left and right head lamps and high beams . I brought this car off of enterprize dealer in nevada. Over the years I began haven lots of problems with this car. So much needed to be done on this car and I spent lots of money too. Not knowing until now this car has some recall issues. Passenger rear door replace and broken again. The… Read more

This is the third time I had to place front left and right head lamps and high beams . I brought this car off of enterprize dealer in nevada. Over the years I began haven lots of problems with this car. So much needed to be done on this car and I spent lots of money too. Not knowing until now this car has some recall issues. Passenger rear door replace and broken again. The rear brake are rusted and needs to be replace,drums pads ext.. Noise in the steering wheel when I turn the car. *tr

NHTSA complaint #10592075
Dec 22, 2013electrical system, exterior lightingFire
Referring to case # [xxx]. Upon further inspection it was determined that the root cause of the short was in fact the small bundle of wires going into the liftgate. Repairs have been made to all affected wires. Including installation of a brand new headlight switch Ford certified. Cost of repairs 2347 dollars and 97 cents.upon reading other complaints on this website I've seen… Read more

Referring to case # [xxx]. Upon further inspection it was determined that the root cause of the short was in fact the small bundle of wires going into the liftgate. Repairs have been made to all affected wires. Including installation of a brand new headlight switch Ford certified. Cost of repairs 2347 dollars and 97 cents.upon reading other complaints on this website I've seen at least 40 other cases caused by the same bundle of wires. This is very dangerous and as you can see could potentially cause a vehicle to burst into flames while driving. Something's gotta be done. Information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6). *tr

NHTSA complaint #10556969
Dec 10, 2013electrical system, exterior lighting
The left rear turn signal stopped working- the blown bulb indication was noticed by the fast flash signal on the dashboard indicator. When going to replace the bulb it was found that the upper socket for the turn signal socket is melted to the lens cover. The lens cover socket mounting hole was distorted by heat. Once the socket was removed the bulb was found not to… Read more

The left rear turn signal stopped working- the blown bulb indication was noticed by the fast flash signal on the dashboard indicator. When going to replace the bulb it was found that the upper socket for the turn signal socket is melted to the lens cover. The lens cover socket mounting hole was distorted by heat. Once the socket was removed the bulb was found not to be blown. The socket housing shows internal signs of heat damage -color change. The bulb was in position in the socket and the bulb base showed no sign of melting at the bulb contact points. It appears the heat was generated in the socket connection to the bulb base. There are multiple complaint of a similar finding on multiple years of the Ford Focus that were easily found with a internet search- Ford Focus melted socket. Purchasing replacement socket from dealer as this is a major personal safety issue. *tr

NHTSA complaint #10555472
Feb 12, 2013exterior lighting
I purchased a used 2005 Ford Focus zxw wagon. I love the vehicle, as it gets good mileage, & has ample space, but I ran into a problem with this vehicle as my left tail light went out on me. Upon taking out the rear light assembly, and trying to replace the light bulb, I had the hardest time taking out the light socket out of the light assembly to change the bulb. Upon… Read more

I purchased a used 2005 Ford Focus zxw wagon. I love the vehicle, as it gets good mileage, & has ample space, but I ran into a problem with this vehicle as my left tail light went out on me. Upon taking out the rear light assembly, and trying to replace the light bulb, I had the hardest time taking out the light socket out of the light assembly to change the bulb. Upon finally getting the light socket out, I find the tail light assembly where the light socket holds the bulb had melted, & deformed the hole of the tail light assembly. What a terrible design! From there, I decided to take out the right side tail light and check to see if the right side tail lens is toast too........sure enough, the right side tail light assembly had melted too, but lucky for me it still works. Ford should honor a recall for this problem, as I've read numerous forums about the tail lights melting on the Ford Focus wagons. *tr

NHTSA complaint #10497957
Dec 5, 2012steering, suspension, engine and engine cooling, power train, electrical system, exterior lighting, visibility, latches/locks/linkages, wheels, seats
Tl* the contact owns a 2005 for Focus zxw station wagon. The contact stated that when the key was in the ignition and the shift over ride button was depressed, the key would become locked in the ignition. The contact took the vehicle to the dealer and was told that the vehicle was operating as designed. The contact glued the shift over ride button in place and changed the… Read more

Tl* the contact owns a 2005 for Focus zxw station wagon. The contact stated that when the key was in the ignition and the shift over ride button was depressed, the key would become locked in the ignition. The contact took the vehicle to the dealer and was told that the vehicle was operating as designed. The contact glued the shift over ride button in place and changed the ignition, which resolved the failure. The contact also stated the metal frame of the driver's seat became cracked. The contact had to prop the seat up so that he could drive the vehicle. The manufacturer was contacted and a complaint was filed. The vehicle was not further repaired. The failure mileage was 205,000. Updated 02/20/13*lj the consumer stated the transmission was poorly designed. Updated 02/21/13 the consumer stated the experienced numerous problems with the transmission, after having the fluid flushed. The consumer stated the side view mirrors were rigid and were easy to break, the rear suspension springs were not designed to carry weight, which caused the vehicle to bounce on the highway and secondary road bumps. The heat shields attached to the exhaust system were designed poorly, to the point they were bent and caused a rattle. The steel rims, bent easily, which created a vibration and balance problem. The headlights lenses were discolored, the valve cover gasket leaked oil onto the spark plugs, the hood cables were defective. The hood cable froze and broke. Updated 07/25/13

NHTSA complaint #10487466
Jul 9, 2012exterior lightingFire
Tl* the contact owns a 2005 Ford Focus. The contact stated that the brake light bulbs overheated and as a result, melted the headlight assembly. The vehicle was taken to the dealer who diagnosed that the headlight assembly needed to be replaced. The manufacturer was made aware of the failure who did not offer any assistance. The vehicle was not repaired. The failure mileage… Read more

Tl* the contact owns a 2005 Ford Focus. The contact stated that the brake light bulbs overheated and as a result, melted the headlight assembly. The vehicle was taken to the dealer who diagnosed that the headlight assembly needed to be replaced. The manufacturer was made aware of the failure who did not offer any assistance. The vehicle was not repaired. The failure mileage was 28,000 and the current mileage was 58,000.

NHTSA complaint #10464714
Jun 29, 2010electrical system, exterior lightingFire

Excessive heat from taillight/brakelight bulb caused plastic housing to distort and brake lights fuse to burn out, causing loss of rear brake lights. Potential for rear end collision & wiring fire. After fuse was replaced, wiring smoldered until new fuse also burned out. *tr

NHTSA complaint #10340573
← All 2005 Ford Focus problems & recalls