Tl* the contact owns a 2000 Ford Focus. The contact took the vehicle to an independent mechanic for routine maintenance and was informed that the rear control arms and cradles were severely rusted and needed replacement. The vehicle was not repaired. The vehicle was not taken to the dealer for diagnostic testing. The manufacturer was notified of the failure. The approximate failure mileage was 150,000.
2000 Ford Focus body problems
127 owners reported body & structure problems — 3% of all 3,686 complaints about the 2000 Ford Focus.
Body & structure complaints by Ford Focus year
What owners report
The rear door latches on my car have failed. The car's year and make was recalled under recall: 05s27, NHTSA campaign # 05v030000 however my VIN number is not covered under this campaign. I now have rear doors tied together using a rope.
Tl* the contact owns a 2000 Ford Focus. The contact stated that while driving 10 MPH, the vehicle slip on ice and crashed into a boulder. The contact stated that pieces of the dashboard fractured causing injuries to the front passenger's left side of the face, front of neck, chest, abdomen, and left thigh which required medical attention. A police report was not filed. The… Read more
Tl* the contact owns a 2000 Ford Focus. The contact stated that while driving 10 MPH, the vehicle slip on ice and crashed into a boulder. The contact stated that pieces of the dashboard fractured causing injuries to the front passenger's left side of the face, front of neck, chest, abdomen, and left thigh which required medical attention. A police report was not filed. The vehicle was destroyed. The manufacturer was not notified of the failure. The approximate failure mileage was 97,000.
Key wont go into ignition, wheel locked up, have to get locksmith to fix...barely affordable. *tr
Driving at 20mph the left front wheel fell off. This happened due to the subframe being completely rusted through and it broke at the arm leading to the wheel. Inspection sticker 9 months earlier did not mention any issues. Car body does not appear to have any rust. $750 to repair using used subframe. Value of car approx $1400. Unusual level of subframe rust for age,… Read more
Driving at 20mph the left front wheel fell off. This happened due to the subframe being completely rusted through and it broke at the arm leading to the wheel. Inspection sticker 9 months earlier did not mention any issues. Car body does not appear to have any rust. $750 to repair using used subframe. Value of car approx $1400. Unusual level of subframe rust for age, condition and geographical location of car. *tr
Tl* the contact owns a 2000 Ford Focus. The contact stated that while driving approximately 15 MPH on a curved road, a loud noise was heard from the rear of the vehicle. The contact moved off the roadway to inspect the failure and discovered that the driver's side subframe had become completely detached from the vehicle due to corrosion. There was also a large hole under the… Read more
Tl* the contact owns a 2000 Ford Focus. The contact stated that while driving approximately 15 MPH on a curved road, a loud noise was heard from the rear of the vehicle. The contact moved off the roadway to inspect the failure and discovered that the driver's side subframe had become completely detached from the vehicle due to corrosion. There was also a large hole under the carriage. The vehicle was not repaired. The manufacturer was notified of the problem. The approximate failure mileage was 54,140.
A hole appeared in the driver's seat upholstery, near the drivers left hip. Disassembly of the seat cushion revealed a broken weld which allowed a sharp metal piece to puncture the upholstery. I also observed this on replacement seats I purchased from a 2002 svt Focus. Photos (of the 2000 seat) at https://flic.kr/p/mle2fp; https://flic.kr/p/mlduyh; https://flic.kr/p/mle5w6.… Read more
A hole appeared in the driver's seat upholstery, near the drivers left hip. Disassembly of the seat cushion revealed a broken weld which allowed a sharp metal piece to puncture the upholstery. I also observed this on replacement seats I purchased from a 2002 svt Focus. Photos (of the 2000 seat) at https://flic.kr/p/mle2fp; https://flic.kr/p/mlduyh; https://flic.kr/p/mle5w6. I was aware of the hole when I purchased this car in 2005, but did not discover the cause until recently, when the seat folding mechanism failed, and I had to replace the seats, and noticed a similar hole in several that I saw. I then disassembled the original seat and found the cause of the problem. This issue is dangerous in that it exposes the driver's body to a sharp metal projection. *tr
Got my daughter her first used car from a dealer, which I should had gone with her to check it out first since an 18 year old would most likely not know anything much of a car besides driving it. You would think buying from a used dealer is safer than buying out in the street. So when we took it out of the lot noticed engine tremble and suspension noise, (too bad no lemon law… Read more
Got my daughter her first used car from a dealer, which I should had gone with her to check it out first since an 18 year old would most likely not know anything much of a car besides driving it. You would think buying from a used dealer is safer than buying out in the street. So when we took it out of the lot noticed engine tremble and suspension noise, (too bad no lemon law on used dealer selling this type of cars). After diagnose the engine produced a catalytic convert malfunction code. Also after inspection the Focus needs all four suspension struts. A month later that other suspension noise resulting almost in a accident from a back wheel shaking which came from a back wheel bearing which hub nut was just about off, which would had caused the wheel to come off. I did a search and this are all common problems with the Focus and I believe there was a recall for a back wheel issue. The bad news is that after a while of the recall being issued it is voided or only specific VIN numbers are considered effected ????. The latest encounter is the steering column locking and the key not being able to unlock it. The worst part is that the ignition cylinder would have to be drilled out to be replaced (very interesting since is the first time I seen that). I'm noticing from my experience with Ford vehicles that although in my opinion there engine and transmission are a bit better than most vehicle, is the little parts that one have issues with that ends up costing the most, just sayi
The vehicle went in for an inspection because there was a clunking noise from the passenger rear of the car. It turns out that the rear subframe and right rear sway bar has rusted completely off. The amount of rust by the technician has been found to be exorbitant in comparison to the amount of miles it was driven. The tech suggested that the car was submerged, but there was… Read more
The vehicle went in for an inspection because there was a clunking noise from the passenger rear of the car. It turns out that the rear subframe and right rear sway bar has rusted completely off. The amount of rust by the technician has been found to be exorbitant in comparison to the amount of miles it was driven. The tech suggested that the car was submerged, but there was no record of it being so. I am the third owner of the car. I would like to file a complaint, for there seems to be a lot of this issue online, from Ford focuses from 2000 to 2005. *tr
The 2000 Ford Focus started making a grinding noise 3 weeks after purchasing it. The back riders side wheel bearing was bad. It has now been changed 3 times in less than 1 year and 6000 miles! We found there had been a recall on this same thing back in 2001,and was fixed. So its still going bad and Ford wont stand behind it! Also the door handle wont work and that was a recall… Read more
The 2000 Ford Focus started making a grinding noise 3 weeks after purchasing it. The back riders side wheel bearing was bad. It has now been changed 3 times in less than 1 year and 6000 miles! We found there had been a recall on this same thing back in 2001,and was fixed. So its still going bad and Ford wont stand behind it! Also the door handle wont work and that was a recall that was fixed too, also to bad so sad! Ford has turned into a very bad company to do business with!we have always had fords,but that's about to change! *tr
The accident occurred on a hill at 10:30 p.m. I suddenly lost all power and control of the car near the crest of this hill. The car drifted back almost in a straight line. The brakes and engine weren't working as the car picked up speed in reverse under its own power I.e., from the slope of the hill. It continued backward until coming to a sudden stop with severe impact. The… Read more
The accident occurred on a hill at 10:30 p.m. I suddenly lost all power and control of the car near the crest of this hill. The car drifted back almost in a straight line. The brakes and engine weren't working as the car picked up speed in reverse under its own power I.e., from the slope of the hill. It continued backward until coming to a sudden stop with severe impact. The car was stopped by a storm sewer culvert (ditch) to the side of the road. The left rear of the car and undercarriage were severely damaged I.e., catalytic converter, muffler, rear axle, etc. The car was in excellent condition, was well maintained and had recently been inspected. The car was deemed a complete loss by the insurance company. I can provide more detailed information including a police report if requested. *tr
Tl* the contact owns a 2000 Ford Focus. The contact stated that while driving approximately 35 MPH, she noticed a loud banging noise coming from underneath the vehicle. The vehicle was inspected by an independent mechanic, who stated that the frame was fracturing and needed to be replaced. The vehicle was not repaired. The manufacturer was not made aware of the failure. The… Read more
Tl* the contact owns a 2000 Ford Focus. The contact stated that while driving approximately 35 MPH, she noticed a loud banging noise coming from underneath the vehicle. The vehicle was inspected by an independent mechanic, who stated that the frame was fracturing and needed to be replaced. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure and current mileages were approximately 61,000.
2000 Ford Focus, rear doors will not close, currently using duct tape. Although there was a recall, I'm told not my VIN number. Looked online, many other complaints like mine, also not their VIN number. It appears to be much more wide spread than Ford wants to admit. *tr
Tl*the contact owns a 2000 Ford Focus. While driving 65 MPH, the contact crashed into a guardrail with the front driver's side of the vehicle. He sustained injuries to the left side of his head due to the grab handle. A police report was filed and the vehicle was repaired. The contact feels that the grab rail in the vehicle is unsafe because it protrudes from the head… Read more
Tl*the contact owns a 2000 Ford Focus. While driving 65 MPH, the contact crashed into a guardrail with the front driver's side of the vehicle. He sustained injuries to the left side of his head due to the grab handle. A police report was filed and the vehicle was repaired. The contact feels that the grab rail in the vehicle is unsafe because it protrudes from the head liner in a folded position. The contact is in the process of notifying the manufacturer. The failure mileage was 139,000 and current mileage was 140,000. Updated 06/29/09 *bf updated 07/02/09.*jb
Following a minor accident, no damage, the airbag deployed broke the windshield and dashboard. For 12 months afterward the passenger floor would fill with water during rain showers. I took it to be repaired 4 times with no success finally on the 5th trip the body shop figured out that the glue or filler that was placed between the welded structural components during assembly… Read more
Following a minor accident, no damage, the airbag deployed broke the windshield and dashboard. For 12 months afterward the passenger floor would fill with water during rain showers. I took it to be repaired 4 times with no success finally on the 5th trip the body shop figured out that the glue or filler that was placed between the welded structural components during assembly at the factory had cracked leaving a tiny hole that was siphoning water into the passenger compartment. They applied sealant to the seam between the passenger door panel and roof and so far no more leaks. *jb
Upon getting out of the vehicle the bottom of the door was so sharp that it cut the consumer's leg. *ak
Ignition failed, had to be replaced, tires wear incredibly fast (4 sets of tires at 45000 miles), radio cut out, had to be replaced twice, brakes failed at least three times causing two accidents, dealership said they replaced them, but lied and never did, was forced to spend $500 having them replaced, trunk doesn't close, bad suspension, spun out on an exit ramp
Vehicle has been given consumer trouble since purchasing it. 2nd day after purchase vehicle was in dealer's shop for 2 weeks. When putting on brakes vehicle shakes. Also, driver cannot see to make turns because truck is very high.*ak while driving, the consumer and his daughter were hurt due to brakes and wipers failed in the rain. The rear window is very high and the driver… Read more
Vehicle has been given consumer trouble since purchasing it. 2nd day after purchase vehicle was in dealer's shop for 2 weeks. When putting on brakes vehicle shakes. Also, driver cannot see to make turns because truck is very high.*ak while driving, the consumer and his daughter were hurt due to brakes and wipers failed in the rain. The rear window is very high and the driver was unable to see vehicles from behind. Brakes failed more than three times, however the dealer refused to fix it after the first repair there were 2 injuries, consumer also states the airbags failed. *yh
While vehicle was parked in the driveway there was a fire in the door on the passenger's side. Owner was able to put out the fire. There was a 95% chance that vehicle would be totalled. *ak