CarProblemsDB

2016 Ford F-150 speed control (cruise, throttle) problems

83 owners reported speed control (cruise, throttle) problems — 5% of all 1,811 complaints about the 2016 Ford F-150.

Speed control (cruise, throttle) complaints by Ford F-150 year

20261
202511
20248
202318
202216
202121
202013
201930
201861
201751
201683
2015123
201488
2013275
2012188
2011203
201039
200954
200841
200754
200631
200557
200470
200332
200286
2001180
2000188

What owners report

Nov 9, 2026power train, vehicle speed control
I had received a recall letter from Ford in may 2026, 26s28, but a remedy was not available yet. July 14, 2026 I was driving on a highway, my cruise set at 69 MPH, when my 2016 Ford f150 suddenly downshifted to first or second gear causing my truck to swerve back and forth till it slowed down. I took truck intoford dealership and they updated my PCM software. Since the PCM… Read more

I had received a recall letter from Ford in may 2026, 26s28, but a remedy was not available yet. July 14, 2026 I was driving on a highway, my cruise set at 69 MPH, when my 2016 Ford f150 suddenly downshifted to first or second gear causing my truck to swerve back and forth till it slowed down. I took truck intoford dealership and they updated my PCM software. Since the PCM updating, this has happened 4 more times. Dealership says it is a speed sensor problem in the leadframe. Received customer service program #26n04 letter in july stating an extention on my leadframe warranty. Ford will not fix under warranty.

NHTSA complaint #11776671
Oct 24, 2026power train, electrical system, vehicle speed control
Ford finally sent me a recall notice just this year in may. I have called multiple dealers and bomaritto Ford in [xxx] told me 2 and a half years ago to bring my truck in and they'll replace the lead frame free of charge however any dealerships I contacted in [xxx] denied any such recall. When I received the recall letter from Ford it stated the transmission lead frame would… Read more

Ford finally sent me a recall notice just this year in may. I have called multiple dealers and bomaritto Ford in [xxx] told me 2 and a half years ago to bring my truck in and they'll replace the lead frame free of charge however any dealerships I contacted in [xxx] denied any such recall. When I received the recall letter from Ford it stated the transmission lead frame would be covered for 10 years or 150,000 miles. The truck was already 10 years old when I finally received a notice from Ford. I ended up rebuilding the whole transmission myself and it cost me over $1500.00 in parts, not to mention I was without a vehicle for approx 2 months waiting on all the back ordered parts. The lead frame I installed was not a Ford oem part. The service team in [xxx] told me either way, fird has to replace it with oem parts. I took it to crown Ford in [xxx] and they refused to replace the lead frame which had a check engine code as well. They claimed it was a software update was the problem. I believe that they deleted it from the TCM and ecu. Ford has done everything they possibly could to cover this up and they got the extended warranty to pay for the damaged rear differential which they used the old axle housing that was bent from the lock up and I have spent thousands of dollars in parts and alignments and the vehicle will not stay in alignment because of the damaged rear axle housing. The transfer case was never repaired or replaced also. They treated me completely horrible and lie

NHTSA complaint #11773351
Oct 18, 2026power train, vehicle speed control

Had the recall done at a dealer and now the the software update didn't solve the problem it is now having the wrench and is downshifting periodically with no notice

NHTSA complaint #11771989
Oct 8, 2026power train, vehicle speed control
In mid-september 2026, I had safety recall 26s28 (NHTSA 26v-237) performed on my 2016 Ford F-150 at corwin Ford reno in reno, nv. The recall remedy was a powertrain control module software update intended to prevent unexpected transmission downshifts. Before the recall repair, the vehicle had no drivability problems of any kind. About three days after the recall repair, the… Read more

In mid-september 2026, I had safety recall 26s28 (NHTSA 26v-237) performed on my 2016 Ford F-150 at corwin Ford reno in reno, nv. The recall remedy was a powertrain control module software update intended to prevent unexpected transmission downshifts. Before the recall repair, the vehicle had no drivability problems of any kind. About three days after the recall repair, the truck began repeatedly losing acceleration while driving at highway speed. The vehicle would stop responding to the accelerator, and the wrench warning light came on in the instrument cluster. This happened on multiple occasions over several days. Losing acceleration in highway traffic creates a serious risk of a rear-end collision. This is the same type of loss-of-control hazard the recall was meant to address, and the condition appeared only after the recall software was installed. I contacted the dealer right away to report the safety problem. Over two days I called at least six times and left multiple messages that were not returned. When I reached the service department, they would not inspect the vehicle until the following week, and a service manager offered the same delay. I also contacted Ford customer service and received no help. The vehicle has been at the dealer since september 30, 2026. As of october 7, 2026, there is still no diagnosis or repair. I believe the recall 26s28 remedy either failed to correct the defect or introduced a new powertrain fault that causes loss of motive power at s

NHTSA complaint #11769769
Sep 21, 2026power train, vehicle speed control
Xxx: I scheduled an oil change online and selected the open transmission safety recall. [xxx] Ford executed recall 26s28 (PCM programming) under verification code rglkt7masipij. The truck had absolutely no shifting issues prior to this flash. Xxx: within two weeks of the software update, the truck began experiencing the exact erratic shifting and violent gear-dropping safety… Read more

Xxx: I scheduled an oil change online and selected the open transmission safety recall. [xxx] Ford executed recall 26s28 (PCM programming) under verification code rglkt7masipij. The truck had absolutely no shifting issues prior to this flash. Xxx: within two weeks of the software update, the truck began experiencing the exact erratic shifting and violent gear-dropping safety hazards described in the recall. I returned the truck to the dealer. Xxx: after days of complete silence, I had to initiate contact. First by phone, then by physically walking into the service desk on xxx to get answers because the dealer ignored my vehicle. Mid-xxx: after the truck sat on their lot for three weeks, they finally scanned it and retrieved code p2701. The dealer stated the recall wouldn't cover it and immediately quoted me $8,000 to rebuild or $10,000 to replace the transmission. They claimed they would submit the case to Ford corporate. Xxx: having heard nothing, I returned to the dealership in person. I was told they still had no response from corporate. The paperwork contradiction: the technician's notes on page 3 explicitly state: "no update so that one recall cannot be performed, must been updated at some point." this proves the technician failed to look at their own shop's service history from xxx (page 2), where they signed off on completing the update. Furthermore, they condemned the entire transmission based strictly on a digital code scan; they never dropped the pan or performed an

NHTSA complaint #11765851
Aug 11, 2026power train, electrical system, vehicle speed control
I was at my granddaughters and I went to leave and it was like dead except the wrench came up in the dash panel , I waited before calling my husband and I went back to try and start it again and it started no wrench in the display or anything , this was in february 2026. In march of 2026 I was in the middle turn lane on [xxx] by tuttle, ok. And it stalled as I was trying to… Read more

I was at my granddaughters and I went to leave and it was like dead except the wrench came up in the dash panel , I waited before calling my husband and I went back to try and start it again and it started no wrench in the display or anything , this was in february 2026. In march of 2026 I was in the middle turn lane on [xxx] by tuttle, ok. And it stalled as I was trying to turn and would not move I put it back into park and then back to drive and it turned . Next incident was in april2026 and I was on [xxx] south of mustang , ok. And I was in the passing lane passing a vehicle going 65 MPH and it just stalled and went down into 1 st gear I managed to get it to the shoulder of road an then it died it would not start but the radio and lights were still on and there was a wrench popped up in the panel . I waited for about 30 minutes and kept trying to start it after several attempts it started again and I made it home . The next incident my husband drove to doctors office and it did the same thing to him and would not move in the parking lot . About 15 minutes later he got it to start and he made it home . We quit driving it. Then we got a letter from Ford with the recall 26v237 .I waited for 2 nd letter and had not gotten it with a fix for it so I called the Ford service repir center and they got us on the phone connected to a Ford dealership in yukon , ok and they came and got the pickup on august 10 th and took it and brought it back on august 11 th and they did the soft war

NHTSA complaint #11756379
Jul 23, 2026power train, vehicle speed control, engine

Vehicle suddenly seemed to shift while driving causing a loud sound, jerk and caused a loss of control suddenly.

NHTSA complaint #11752526
Jan 2, 2024vehicle speed control, service brakesCrash1 injured
The contact owns a 2016 Ford F-150. The contact stated that while approaching a stop, the brake pedal was depressed, but the vehicle accelerated to unknown speeds. The driver continuously depressed the brake pedal, but it failed to respond. The driver crashed into a mailbox, brick decorations, a stop sign, a golf cart, a gas line, and a tree. The driver pulled the emergency… Read more

The contact owns a 2016 Ford F-150. The contact stated that while approaching a stop, the brake pedal was depressed, but the vehicle accelerated to unknown speeds. The driver continuously depressed the brake pedal, but it failed to respond. The driver crashed into a mailbox, brick decorations, a stop sign, a golf cart, a gas line, and a tree. The driver pulled the emergency brake, and the vehicle stopped.  There were no warning lights illuminated. The vehicle was towed to a collision center. The contact sustained injuries to her hip, but medical attention was not provided. A police report was filed. There was no reported fire or air bag deployment. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 30,000.

NHTSA complaint #11562985
May 25, 2022vehicle speed control, unknown or other, service brakes1 injured
Downshifting while I was driving happened without warning. Besides the gear switch, I noticed problems with the speedometer, erratic gear shifting, and the transmission stuck in one gear. I could have caused a major accident by the vehicle as I was at moderately high speed in motion when the vehicle began to fail. I did also bang my head on the steering wheel when the truck… Read more

Downshifting while I was driving happened without warning. Besides the gear switch, I noticed problems with the speedometer, erratic gear shifting, and the transmission stuck in one gear. I could have caused a major accident by the vehicle as I was at moderately high speed in motion when the vehicle began to fail. I did also bang my head on the steering wheel when the truck began to decelerate on its own! Mechanics told me it was a problem with the oos (output speed shaft sensor). I could have got in a major accident had I not had a quick reaction to the truck automatically downshifting while at a high rate of speed. There is currently no recalls for the 2016 F-150 model however, I did research and found that there are issues recalls for this very same problem for older F-150 models. This is an incredibly dangerous problem. My truck at this time only has 66,000 miles. Not very many miles on it for a 2016 to have this type of issue. Major research needed to get this resolved asap! People’s lives are at stake with this truck!

NHTSA complaint #11466151
Nov 2, 2020power train, vehicle speed controlCrash
Intermittent failure of reverse gear to engage. On multiple occasions the reverse gear fails to engage after multiple attempts to shift into and out of gear. This appears to be an electronic control issue with the transmission shifting control as it eventually resolves itself after numerous attempts. The problem is both inconvenience and safety as backing up is often… Read more

Intermittent failure of reverse gear to engage. On multiple occasions the reverse gear fails to engage after multiple attempts to shift into and out of gear. This appears to be an electronic control issue with the transmission shifting control as it eventually resolves itself after numerous attempts. The problem is both inconvenience and safety as backing up is often necessary to execute a normal turn around. An accident resulting in two insurance claims resulted from this defect; I was attempting to backup in my home driveway and there was delay in the reverse gear engagement; not fully comprehending what was going on, I pressed on the gas to proceed while reverse was not engaging. Then the truck suddenly engaged in reverse and I lurched backward hitting another vehicle before I could apply the brake. Total damages for both vehicles exceeded $15,000.

NHTSA complaint #11372745
Feb 14, 2020vehicle speed control, engine, fuel/propulsion systemFire

My 2016 Ford f150 with engine block heater caught fire today 14 february 2020 at 11:12 am. It was moving and caught fire when I parked the truck

NHTSA complaint #11309284
Aug 22, 2018power train, vehicle speed controlCrash
Tl* the contact owns a 2016 Ford F-150. While the vehicle was parked and unoccupied with the engine running, the vehicle accelerated independently without warning. While the gear shifter was still in the park position, the vehicle crashed into the contact's boat. There were no injuries. The contact stated that the gear shifter failed to move out of park. The contact powered… Read more

Tl* the contact owns a 2016 Ford F-150. While the vehicle was parked and unoccupied with the engine running, the vehicle accelerated independently without warning. While the gear shifter was still in the park position, the vehicle crashed into the contact's boat. There were no injuries. The contact stated that the gear shifter failed to move out of park. The contact powered off the engine. The vehicle was restarted and it operated normally. There was no warning indicator illuminated. The vehicle was not taken to a dealer or an independent mechanic for diagnostic testing. The vehicle was not repaired. The manufacturer was not notified of the failure. The approximate failure mileage was 18,000.

NHTSA complaint #11121745
Aug 8, 2018vehicle speed control, unknown or otherCrash

Speed control includes systems and devices intended to control (accelerate) the speed of the vehicle to the driver's intent such as the accelerator pedal, throttle control cables, linkages, actuators, electronic control units and software, cruise control system actuators and deactivating systems, and other components and systems that may interfere with the speed control

NHTSA complaint #11118658
Apr 6, 2016vehicle speed control, service brakesCrash
While in park with the driver door open, truck off, radio on, confirmed shifter was in park position. I accidentally engaged manual transmission control in front of and gear selector at thumb position of shifter as both are unavoidable. As I was getting out to reach something in the back seat, truck released park and rolled away. In addition, while driving in d (drive) thumb… Read more

While in park with the driver door open, truck off, radio on, confirmed shifter was in park position. I accidentally engaged manual transmission control in front of and gear selector at thumb position of shifter as both are unavoidable. As I was getting out to reach something in the back seat, truck released park and rolled away. In addition, while driving in d (drive) thumb accidentally made contact with (-) control and quickly decelerated to a quick stalled stop, beginning at 50 MPH down to a stop in the road in less than one quarter of a mile. M (manual) selector is an option on the panel, however, both these events happened while in p and d, respectively. In park the truck was in a stall and stopped. In d the truck was traveling at 50 MPH. This is a software malfunction that is allowing an override of braking while in park and rapid shifting at the touch of one control that sits under the drivers thumb.

NHTSA complaint #10853708
← All 2016 Ford F-150 problems & recalls