CarProblemsDB

2006 Ford F-150 speed control (cruise, throttle) problems

31 owners reported speed control (cruise, throttle) problems — 5% of all 585 complaints about the 2006 Ford F-150.

Speed control (cruise, throttle) complaints by Ford F-150 year

20261
202511
20248
202318
202216
202121
202013
201930
201861
201751
201683
2015123
201488
2013275
2012188
2011203
201039
200954
200841
200754
200631
200557
200470
200332
200286
2001180
2000188

What owners report

Jul 6, 2019vehicle speed control

At certain speeds the car stalls when changing gears

NHTSA complaint #11229792
Apr 2, 2019electrical system, exterior lighting, vehicle speed control
Interior lights do not light up on opening the door. Additionally, upon starting the engine, the electrical panel blinks, fizzles, demands reset, which doesn't reset, and eventually corrects itself sometimes after 15 minutes of blinking. Additionally, the high beams implement and then you cannot make the high beams turn off. May all be related but, seems like 3 separate… Read more

Interior lights do not light up on opening the door. Additionally, upon starting the engine, the electrical panel blinks, fizzles, demands reset, which doesn't reset, and eventually corrects itself sometimes after 15 minutes of blinking. Additionally, the high beams implement and then you cannot make the high beams turn off. May all be related but, seems like 3 separate issues, all seem to be related to the electrical panel. Blinking begins while stationary upon starting truck and continues while in motion, indicates problem with everything electrical including speedometer and states auto locks fail, along with blinking failure of all systems stating reset but pushing reset does not appear to fix anything.....only time fixes it.

NHTSA complaint #11193476
Mar 26, 2018vehicle speed controlCrash

My husband was backing out of our driveway and had sudden acceleration that spun him up onto the lawn and finally the vehicle was stopped after hitting our house and going through the wall. The truck stopped with the back wheels inside the house with the engine continuing to rev.

NHTSA complaint #11081411
Jul 7, 2017vehicle speed controlCrash
Tl* the contact owns a 2006 Ford F-150. When the contact attempted to shift out of the park position at a car wash, the vehicle accelerated out of control. The vehicle crossed the road, went into an apartment complex, and crashed into a concrete block. All four tires were flattened. There were no warning indicators illuminated. A police report was not filed and there were no… Read more

Tl* the contact owns a 2006 Ford F-150. When the contact attempted to shift out of the park position at a car wash, the vehicle accelerated out of control. The vehicle crossed the road, went into an apartment complex, and crashed into a concrete block. All four tires were flattened. There were no warning indicators illuminated. A police report was not filed and there were no injuries. The vehicle was towed to the contact's residence. The dealer (sabine river Ford in orange, texas) was contacted and stated that there was no recall and that the failure was unusual. The manufacturer was made aware of the failure and stated that there was no recall. The manufacturer placed the contact on hold for twenty-five minutes and did not return to the phone. The failure mileage was 112,000.

NHTSA complaint #11003595
Oct 19, 2016vehicle speed control, engine
Tl* the contact owns a 2006 Ford F-150. The contact stated that the vehicle would shook whenever the vehicle was idling. The shaking increased during acceleration. The contact took the vehicle to a dealer who was unable to identify the cause of the failure, but informed the contact that the shaking was a common issue with the year, make, and model. The vehicle was not repaired… Read more

Tl* the contact owns a 2006 Ford F-150. The contact stated that the vehicle would shook whenever the vehicle was idling. The shaking increased during acceleration. The contact took the vehicle to a dealer who was unable to identify the cause of the failure, but informed the contact that the shaking was a common issue with the year, make, and model. The vehicle was not repaired and the failure recurred. The manufacturer was not made aware of the failure. The approximate failure mileage was 111,000.

NHTSA complaint #10917391
May 27, 2016vehicle speed control
Tl* the contact owns a 2006 Ford F-150. While the vehicle was parked with the brake pedal depressed, the vehicle spontaneously accelerated when placed in reverse. The acceleration lasted for approximately 30 seconds. The failure recurred, but while in forward gear approximately three times. The vehicle was taken to the dealer, but they could not duplicate the failure. The… Read more

Tl* the contact owns a 2006 Ford F-150. While the vehicle was parked with the brake pedal depressed, the vehicle spontaneously accelerated when placed in reverse. The acceleration lasted for approximately 30 seconds. The failure recurred, but while in forward gear approximately three times. The vehicle was taken to the dealer, but they could not duplicate the failure. The vehicle was not repaired. The approximate failure mileage was 31,000.

NHTSA complaint #10871231
Jan 21, 2015electrical system, vehicle speed control

Tl* the contact owns a 2006 Ford F-150. While driving approximately 45 MPH, the vehicle failed to accelerate and the service vehicle warning indicator illuminated continuously. The vehicle was taken to a dealer. The technician diagnosed that a sensor was faulty. The vehicle was repaired. The manufacturer was made aware of the failure. The failure mileage was 89,069. Updated 04/10/15*lj updated 11/5/2015*js

NHTSA complaint #10676932
Aug 28, 2014vehicle speed control
Tl* the contact owns a 2006 Ford F-150. While approaching a traffic light, the vehicle suddenly accelerated without warning. The contact applied excessive force to the brake pedal, but it failed to stop the vehicle. The contact had to rapidly shift the gear into park in order to stop the engine from revving. The failure occurred multiple times. The vehicle was taken to the… Read more

Tl* the contact owns a 2006 Ford F-150. While approaching a traffic light, the vehicle suddenly accelerated without warning. The contact applied excessive force to the brake pedal, but it failed to stop the vehicle. The contact had to rapidly shift the gear into park in order to stop the engine from revving. The failure occurred multiple times. The vehicle was taken to the dealer for diagnostic testing, but the cause of the failure could not be determined. The vehicle was not repaired and the manufacturer was notified. The approximate failure mileage was 3,200.

NHTSA complaint #10629110
Aug 15, 2014structure, vehicle speed control, service brakesCrash

Gas and brake pedal are too close together. You could still be giving it gas while you are pushing on the brakes. I see hundreds of complaints about this online.I was pulling into a parking spot when I thought I was applying the brakes the other half of my foot was on the gas causing me to jump the curb and crash into a wall. *tr

NHTSA complaint #10622576
Mar 15, 2014vehicle speed control, engine

When stopped at a red light my engine began to rev. At very high rpm's and the tires burned out when I shifted the transmission into neutral. I purchased this truck in dec. 2013 and this was approx. The 7th incident of sudden acceleration. It seems to only happen when stooped or slowing down. Any help in this matter would be deeply appreciated. Thanks in advance. *tr

NHTSA complaint #10572587
Nov 30, 2012structure, vehicle speed control, service brakesCrash1 injured
I am 6'5" and wear size 16 shoes. With my size and the distance to the pedal my legs go a little to the side and my shoe is at an angle to the petals lets say 30 degrees. I wearing typical work boot (like in Ford commercials) which the laces have pegs the shoe laces go around. These pegs are the same as all work boots (red wings - $300 boot). What happened is because the… Read more

I am 6'5" and wear size 16 shoes. With my size and the distance to the pedal my legs go a little to the side and my shoe is at an angle to the petals lets say 30 degrees. I wearing typical work boot (like in Ford commercials) which the laces have pegs the shoe laces go around. These pegs are the same as all work boots (red wings - $300 boot). What happened is because the brake pedal has a thick rubber pad that stretches around the metal brake pedal and leaves a ridge in the back of the pedal all the way around (so the rubber fitting goes over it like a shower cap). Also the truck is an automatic and the break pedal is very large. While backing up giving just a little gas my boot shoe lace peg got trapped behind the brake pedal and was holding my foot on the gas pedal depressing it down. Because the rubber ridge runs all the way around my pedal (as designed) I could not move my foot to the side of the brake pedal to release the gas. Because of the thickness of my foot when I pressed the break with my other foot, it moves the gas pedal down at the same rate as my foot is trapped, so the more you press the brake the more you give gas at a ratio that does not let me stop the vehicle. (note I use only one foot for the gas and brake normally but with my right foot trapped I had no other choice but to use my left foot to brake and try to get it the truck out of gear . I could not do anything in time and hit a stationary building. If someone was behind me, they would

NHTSA complaint #10486507
Jan 13, 2011vehicle speed controlCrash
Tl* 2006 Ford f150. The contact stated that while driving he started to accelerated when the gas pedal stuck causing the vehicle to pick up speed. The vehicle crashed into a building and stopped when it hit a snow bank. The contact was not injured. The vehicle was towed to a local shop where they diagnosed that it was possible for the pedals to get stuck in cold weather. The… Read more

Tl* 2006 Ford f150. The contact stated that while driving he started to accelerated when the gas pedal stuck causing the vehicle to pick up speed. The vehicle crashed into a building and stopped when it hit a snow bank. The contact was not injured. The vehicle was towed to a local shop where they diagnosed that it was possible for the pedals to get stuck in cold weather. The vehicle was being repaired. The manufacturer was not contacted. The contact did not file a police report. The failure and current mileage was 50,000. Upadted 04/28/11

NHTSA complaint #10376587
Feb 2, 2010vehicle speed controlFire
Tl*the contact owns a 2006 Ford f150 pickup truck. He stated that upon attempting to start the vehicle , he smelled a burning odor. Upon further investigation, he noticed all of the wires and the floorboard surrounding the emergency and brake pedal had caught fire overnight while sitting in his driveway. He also noticed soot all over the seats, windows and door panels of the… Read more

Tl*the contact owns a 2006 Ford f150 pickup truck. He stated that upon attempting to start the vehicle , he smelled a burning odor. Upon further investigation, he noticed all of the wires and the floorboard surrounding the emergency and brake pedal had caught fire overnight while sitting in his driveway. He also noticed soot all over the seats, windows and door panels of the vehicle. The police called and a report was filed. The police officer stated that there were no signs of forced entry and the damage was caused by an internal failure within the truck. No repairs have been made to date. The failure and current mileages were 64,000.

NHTSA complaint #10303806
Jan 16, 2007vehicle speed controlFire
Tl* - on december 20, 2006, the contact received a call from the police department stating his 1995 Ford f150 and the car port were on fire at his residence. The vehicle caught fire under the hood. The contact stated that the vehicle had been parked for two months. A witness stated that the vehicle sounded as if it were trying to start on its own. The witness looked into… Read more

Tl* - on december 20, 2006, the contact received a call from the police department stating his 1995 Ford f150 and the car port were on fire at his residence. The vehicle caught fire under the hood. The contact stated that the vehicle had been parked for two months. A witness stated that the vehicle sounded as if it were trying to start on its own. The witness looked into the vehicle and confirmed that no one was in it and called 911. There were no injuries. The vehicle was destroyed. There were no recent repairs to the vehicle. The vehicle had approximately 210,000 miles on it. The fire department stated the cause of the fire to be a faulty speed control deactivation switch. The contact has pictures, a fire department report and the vehicle stored. *nm updated 03/19/07. *jb

NHTSA complaint #10178835
Nov 7, 2006service brakes, hydraulic, vehicle speed controlCrash3 injured

I was involved in an accident which was caused by hitting the brake pedal and the accelerator at the same time. I thought I was hitting the brake when and hit the gas at the same time causing my vehicle to rear end collide with the vehicle in front of me. Since I have been driving the vehicle this has happened several times, the gas pedal is too close in height to the brake pedal. *nm

NHTSA complaint #10172822
← All 2006 Ford F-150 problems & recalls