CarProblemsDB

2000 Ford Excursion brakes problems

64 owners reported brakes problems — 12% of all 532 complaints about the 2000 Ford Excursion.

Brakes complaints by Ford Excursion year

20053
20045
200310
200217
200113
200064

What owners report

Jan 24, 2019unknown or other, service brakes

I purchased this truck 3 months ago from mike marooney north. When I got home I noticed it would not stay in park at all. This caused it to roll down the street with my baby in it. I have made over 50 attempts to get the dealer to put me in a safe vehicle or refund the $3200 back. They refuse to call me back or email me. They told me it was fixed after 3 days but it wasnt.

NHTSA complaint #11171884
Mar 25, 2016steering, suspension, service brakes

It's happened be for but never so scary. We were coming down one of the mountains on highway 299. We were,doing the speed limit of 55. And as we applied the brake it started pulling to the right. Like it was gonna go off the road. It also was vibrating so bad it felt like it was going to fall apart. We pulled over checked for loose bolts. Tire imperfections but nothing.

NHTSA complaint #10851524
Sep 13, 2010service brakes, hydraulic

Extended braking distances reported to dealership within first 20,000 kms. Impossible to invoke antilock pulsing on hard braking on dry pavement. Dealer checked full brake system and found no problems. Aftermarket pads improved the problem. Repeated warping of rotors for the first 50-60,000 kms, then mysteriously only minor warping on extended brake use. *tr

NHTSA complaint #10355192
Feb 17, 2010service brakes, hydraulic
2000 Ford Excursion with less than 100,000 miles, well maintained and original owner. Brakes failed when rear brake line burst on the frame rail while applying the brakes to slow, this was not a panic stop which would induce a high pressure in the line. I was able to make a safe stop and was perplexed by this failure. There was no early warning of this failure and in fact the… Read more

2000 Ford Excursion with less than 100,000 miles, well maintained and original owner. Brakes failed when rear brake line burst on the frame rail while applying the brakes to slow, this was not a panic stop which would induce a high pressure in the line. I was able to make a safe stop and was perplexed by this failure. There was no early warning of this failure and in fact the vehicle was at the dealer two days prior for oil change and new batteries and no mention of low brake fluid or leak in the brake system. After consulting with local repair facilities they state this is a known problem, I do not believe a vehicle that is properly maintained should have a sudden and catastrophic brake line failure that is only 10 years old and I'm sure there must be accidents related to similar vehicles. *tr

NHTSA complaint #10311493
Dec 9, 2005service brakes, hydraulic
Dt: the contact stated while driving at 40 MPH the vehicle rattled. The vehicle was taken to the dealership. The first time the front rotors had to be turned. Several thousand miles later the problem recurred. He took the vehicle to the dealership again. This time it was the rear wheel rotors. The rotors were turned. The third time he took the vehicle to the dealer have… Read more

Dt: the contact stated while driving at 40 MPH the vehicle rattled. The vehicle was taken to the dealership. The first time the front rotors had to be turned. Several thousand miles later the problem recurred. He took the vehicle to the dealership again. This time it was the rear wheel rotors. The rotors were turned. The third time he took the vehicle to the dealer have it serviced. This time the brake pads, and rotors were turned. The dealership told him it was the design of the brake system, the rotors were too small for the brake system. All repairs have been made at the contacted expense. *ak updated 1/19/2006 - the front rotors warped which caused pulsation while braking. *nm

NHTSA complaint #10144863
Nov 15, 2005service brakes, hydraulic
Front disc brake rotors warp under normal driving conditions. This results in extremely violent shuddering and shaking of the steering wheel while braking at speeds over 40 MPH. Rapid braking at freeway speeds are high risk for loss of control and collision. I bought this Excursion used with ~48,000 miles and have had the rotors resurfaced at ~ 60, 000 and 84,000 mi. At… Read more

Front disc brake rotors warp under normal driving conditions. This results in extremely violent shuddering and shaking of the steering wheel while braking at speeds over 40 MPH. Rapid braking at freeway speeds are high risk for loss of control and collision. I bought this Excursion used with ~48,000 miles and have had the rotors resurfaced at ~ 60, 000 and 84,000 mi. At 93,000 miles I had to replace all 4 rotors because of repeated shuddering from rotor warpage and wear which cost me over $500 on top of the $400 I spent at 84,000 miles for a brake job. Six months and 14,000 miles later I am having the same problem and now the dealer tells me there is a Ford service bulletin recommending a new type of pad. They also told me they have four other Excursion owners that are having the same complaints and safety concerns requiring similar repairs. The front rotors are insufficiently engineered for the size and weight of this vehicle, and presents a safety risk for Excursion owners as well as surrounding motorists. Ford knows they have a problem but instead of doing the right thing and fixing it they are bleeding consumers for repairs of a faulty design while the government does nothing about it. *nm

NHTSA complaint #10142763
Jul 21, 2005service brakes, hydraulic
Vehicle was parked in my garage. I was in the garage at the time. Began smelling burning electrical smell. Found white smoke coming out of engine compartment, increasing dramatically in volume. In just a few moments, the smoke was a solid curtain coming from the gap between the hood and driver side front fender. Opened hood and found an electrical switch on the brake… Read more

Vehicle was parked in my garage. I was in the garage at the time. Began smelling burning electrical smell. Found white smoke coming out of engine compartment, increasing dramatically in volume. In just a few moments, the smoke was a solid curtain coming from the gap between the hood and driver side front fender. Opened hood and found an electrical switch on the brake system master cylinder creating the smoke. Using a rag I pulled the switch away from the cylinder and it was melted in half. The part of the switch connected to the electrical wire continued to smoke. I disconnected the remaining piece of the switch from the wire and it stopped smoking but everything was hot.

NHTSA complaint #10129605
May 15, 2005parking brake

Park brake assembly split in 2, complete failure of park brake and unit failure. Whole unit must be replaced, hardly ever used, so it should not have failed

NHTSA complaint #10120959
May 15, 2005parking brake

Park brake assembly split in 2, complete failure of park brake and unit failure. Whole unit must be replaced, hardly ever used, so it should not have failed

NHTSA complaint #10120958
Mar 16, 2005service brakes, hydraulic

While braking at highway speeds steering wheel pulled to the left/right and shimmied intermitenlly. Dealership was notified, but did not resolve the problem. *ak

NHTSA complaint #10115262
Feb 22, 2005service brakes, hydraulic, visibility

The rear windshield wiper does not operate due to the spring. Also, the brakes do not function properly due to the brake rotors. The vehicle will not stop accordingly.*ak

NHTSA complaint #10112904
Mar 17, 2003service brakes, hydraulicCrash

When the brake pedal was depressed it failed to stop the vehicle immediately, and the entire front end vibrated. This resulted in extended stopping distance. On one occasion, the vehicle was involved in a rear end collision. Dealership replaced or resurfaced brake rotors every three to four months. *ak *jb

NHTSA complaint #10044470
Oct 1, 2000tires, service brakes, electricCrash
On 04/28/2000, I was towing my boat and trailer to lake erie on ohio state route 11 north when my rig suddenly began to fishtail extensively in perfect road and whether conditions and at a speed of approximately 50mph. I immediately applied electric trailer brakes to all four trailer wheels which did operate but to no avail. I then tried to hold the brakes on the trailer and… Read more

On 04/28/2000, I was towing my boat and trailer to lake erie on ohio state route 11 north when my rig suddenly began to fishtail extensively in perfect road and whether conditions and at a speed of approximately 50mph. I immediately applied electric trailer brakes to all four trailer wheels which did operate but to no avail. I then tried to hold the brakes on the trailer and also apply acceration to the truck to pull this rig out of the fishtail. Within a matter of 5 seconds or less, I was thrown off the right side of the road into the hillside with a blown right rear tire on the truck. Having pulled boats and trailers all of my life I couldn't figure out why this rig got away from me so fast, especially at the speed I was going. After everything about firestone tires that came out in the following months, I feel that something definitely happened to this tire to cause the accident. After getting the truck repaired and then checking the consumer report's website about tires, I decided to check out the dot dates of the tires that remained on the truck and found out that all these tires that were installed as original equipment were manufactured in early 1990. As far as I'm concerned, this is fraud and negligence on both firestone's and Ford's part since they sold and put outdated tires on this new truck. I emailed a complaint to Ford's customer service with the same information that I am providing you, but it was to no avail. At this time I'm looking into possibly fili

NHTSA complaint #733126
← All 2000 Ford Excursion problems & recalls