My camera has been upside down and or blank or won't show anything half the time and took to the dealer and they said they cant fix it because software issue but Ford has recalled other cars cameras for the same issue. Can't see behind me very well due to camera malfunction almost every time in reverse.
2011 Ford Edge backup camera problems
18 owners reported backup camera problems — 1% of all 1,803 complaints about the 2011 Ford Edge.
Backup camera complaints by Ford Edge year
What owners report
The contact owns a 2011 Ford Edge. The contact stated that while the back over prevention camera was activated, the image was displayed upside down or there was no image displayed. The contact stated that the camera display a gray and black screen. The failure occurred intermittently at first but became persistent over time. The contact stated that the failure occurred while… Read more
The contact owns a 2011 Ford Edge. The contact stated that while the back over prevention camera was activated, the image was displayed upside down or there was no image displayed. The contact stated that the camera display a gray and black screen. The failure occurred intermittently at first but became persistent over time. The contact stated that the failure occurred while the transmission was shifted into reverse. The vehicle was not taken to the dealer to be diagnosed or repaired. The manufacturer was not informed of the failure. The failure mileage was unknown.
My rearview camera images are upside down, and sometimes do not display when reversing, just as the recall they are having on the newer models right now.
The contact owns a 2011 Ford Edge. The contact stated that while reversing, the rearview camera displayed a blank or upside-down image. The contact stated that the rearview camera had previously been replaced, but the failure persisted. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was not made aware of the failure. The failure mileage was approximately 160,000.
The contact owns a 2011 Ford Edge. The contact stated that the infotainment screen touchpad was engaging functions independently. Additionally, the contact stated the rearview camera and the GPS were intermittently inoperable. The contact replaced the image processing module (ipm); however, the failure persisted. The contact stated while driving at various speeds, the awd and… Read more
The contact owns a 2011 Ford Edge. The contact stated that the infotainment screen touchpad was engaging functions independently. Additionally, the contact stated the rearview camera and the GPS were intermittently inoperable. The contact replaced the image processing module (ipm); however, the failure persisted. The contact stated while driving at various speeds, the awd and cruise control modes disengaged unintendedly. The contact stated that messages indicating that the traction control, cruise control, and awd were disengaged were displayed. The dealer and the manufacturer were notified of the failure. The vehicle was not diagnosed or repaired. The failure mileage was approximately 140,000.
Rear backup camera is not working telling me to contact Ford dealership when I'm backing up and is delayed on showing it I've tried resetting it and it still don't work
The contact owns a 2011 Ford Edge. The contact stated when the vehicle was shifted into reverse(r), the rearview camera image was distorted. The contact stated that the failure was intermittent and that there was no warning light illuminated. The contact had not taken the vehicle to a local dealer or independent mechanic. The vehicle was not diagnosed or repaired. The… Read more
The contact owns a 2011 Ford Edge. The contact stated when the vehicle was shifted into reverse(r), the rearview camera image was distorted. The contact stated that the failure was intermittent and that there was no warning light illuminated. The contact had not taken the vehicle to a local dealer or independent mechanic. The vehicle was not diagnosed or repaired. The manufacturer was not informed of the failure. The failure mileage was approximately 103,000.
NHTSA request #1576215 | Ford motor company [xxx] I am filing a complaint as suggested by the u.s. Department of transportation’s vehicle safety hotline information center. My 2011 Ford Edge is experiencing the same symptoms as indicated in a safety recall for failure of the backup camera, however my vehicle/equipment is not included in the recall. The camera was replaced and… Read more
NHTSA request #1576215 | Ford motor company [xxx] I am filing a complaint as suggested by the u.s. Department of transportation’s vehicle safety hotline information center. My 2011 Ford Edge is experiencing the same symptoms as indicated in a safety recall for failure of the backup camera, however my vehicle/equipment is not included in the recall. The camera was replaced and paid for out of pocket in 2021 due to the same issue. I requested that Ford motor company provide a customer satisfaction program for my vehicle's back up camera. We paid $1,072.46 ($485.00 for the camera + $587.46 in labor charges) to replace the defective back up camera 1/28/2021 after the technician at mike marone Ford in longmont, co verified our concern and confirmed that the backup camera was inoperable and had failed. This repair came with a 2 year unlimited mileage parts and labor warranty. When the camera failed again in 2023, I called the same dealership to ask about the repairs and was told the warranty had expired a few months prior and there was nothing they could do other than have us pay to replace the camera again. They performed an inspection and confirmed the camera is inoperable. Shortly thereafter we received safety recall notification 23s23/NHTSA recall 23v342 for an inoperative rear camera for our 2020 Ford explorer. I was hopeful that Ford realized the camera was defective and would replace the camera in our 2011 Ford Edge as part of that same recall, as the safety notificatio
Have a 2011 Ford Edge limited purchased new from a local Ford dealer. Seems like Ford has had issues with the backup cameras in all models that cameras have been available since 2007, have resisted and continues not to issue a safety recall. Since 2018 NHTSA have required backup cameras as safety equipment in all vehicles. This camera issues is definitely a safety issue. … Read more
Have a 2011 Ford Edge limited purchased new from a local Ford dealer. Seems like Ford has had issues with the backup cameras in all models that cameras have been available since 2007, have resisted and continues not to issue a safety recall. Since 2018 NHTSA have required backup cameras as safety equipment in all vehicles. This camera issues is definitely a safety issue. Ford and its dealer will not addressed it unless they charge and excessive amount for the repair running the gamut from $100 to $800 which may or may not correct the problem. NHTSA needs to require and mandate that the Ford motor co declared this as a safety recall issue and correct the problem. All their vehicles, new or old, have been having problems with this backup camera safety equipment.
Rearview camera screen is blank or scrambled 98% of the time. The backup sensor has also stopped working. This does not allow me to utilize the safety features for parking or reversing. This issue has been found in newer models of my vehicle and those are currently being recalled. There is no warning for the rearview camera screen, but sometimes it does say that the camera is… Read more
Rearview camera screen is blank or scrambled 98% of the time. The backup sensor has also stopped working. This does not allow me to utilize the safety features for parking or reversing. This issue has been found in newer models of my vehicle and those are currently being recalled. There is no warning for the rearview camera screen, but sometimes it does say that the camera is not available. This issue has been ongoing for years.
The contact owns a 2011 Ford Edge. The contact stated while her husband was driving at 20 MPH and coming to a stop, the brake pedal was depressed but failed to respond. The contact's husband pumped the brake pedal several times and the vehicle stopped. The contact stated that the failure reoccurred while driving. Additionally, the contact stated that rearview camera image was… Read more
The contact owns a 2011 Ford Edge. The contact stated while her husband was driving at 20 MPH and coming to a stop, the brake pedal was depressed but failed to respond. The contact's husband pumped the brake pedal several times and the vehicle stopped. The contact stated that the failure reoccurred while driving. Additionally, the contact stated that rearview camera image was distorted. The vehicle was taken to the dealer where it was diagnosed that the brake booster master cylinder and the rearview camera needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure and referred the contact to NHTSA. The failure mileage was approximately 80,000.
The backup camera displays upside down. Also, there is a clunk noise coming from the front end when you put in gear. Seems to be a common problem when you google.
While conducting an at-home sync2 software update to version 3.10 via a properly formatted USB flash drive, the component that failed was the accessory protocol interface module (apim) resulting in the vehicle's entire infotainment software, the back-up camera, GPS, bluetooth, radio, climate controls, essentially all functions through the center touch screen to completely stop… Read more
While conducting an at-home sync2 software update to version 3.10 via a properly formatted USB flash drive, the component that failed was the accessory protocol interface module (apim) resulting in the vehicle's entire infotainment software, the back-up camera, GPS, bluetooth, radio, climate controls, essentially all functions through the center touch screen to completely stop functioning. Roughly half way through the sync2 update which consisted of having the vehicle in an engine-on idle-state as required by Ford, the center touch screen displaying the update progress bar faded to black and ambient lights were lost. Ford claims that this at-home update could take anywhere from 45-60 minutes. I allotted 90 minutes for the update to complete its processes thinking the screen going black was normal during this update. After realizing the screen didn't come back on after a long while, I knew a bigger problem existed. The vehicle has been inspected by technicians at a local Ford dealership and their conclusion was to spend $1,888 plus labor and taxes to replace the apim. I do not agree with Ford and their conclusion on this incident given that I had shared the reason as to how this occurred in the first place. No warning was given or error code provided during the day of the incident. I followed Ford's directions for an at-home update and now as a result, my vehicle is not fully functional and Ford is making me pay for it.