CarProblemsDB

2021 Ford Bronco backup camera problems

23 owners reported backup camera problems — 10% of all 232 complaints about the 2021 Ford Bronco.

Backup camera complaints by Ford Bronco year

20253
20242
202311
202224
202123

What owners report

Apr 17, 2026seats, fuel/propulsion system, back over prevention
3 separate safety-related components have failed on my 2021 Ford Bronco, all of which correspond to open federal safety recalls that remain unremedied: 1. Infotainment/apim module & backup camera system (recall campaign 26v124): my infotainment screen fails to turn on, particularly in high-temperature conditions. When this occurs, the rearview/backup camera is completely… Read more

3 separate safety-related components have failed on my 2021 Ford Bronco, all of which correspond to open federal safety recalls that remain unremedied: 1. Infotainment/apim module & backup camera system (recall campaign 26v124): my infotainment screen fails to turn on, particularly in high-temperature conditions. When this occurs, the rearview/backup camera is completely non-functional. The vehicle displays no image when in reverse gear, eliminating all camera-assisted visibility behind the vehicle. This directly matches the conditions described in recall 26v124, issued march 4, 2026. No remedy has been provided. 2. Digital instrument cluster / dashboard: my digital dashboard intermittently fails to illuminate at vehicle startup. This occurs randomly and without warning. When it fails, the driver cannot see critical safety information including current speed, fuel level, engine temperature, or any warning indicators. Video documentation of this failure exists. This component is available for inspection upon request. 3. Low pressure fuel pump (recall campaign 25v455): my vehicle has stalled on multiple occasions while in motion. During stall events, all dashboard warning lights illuminate simultaneously. This is consistent with the fuel delivery failure described in recall 25v455, issued july 8, 2025, which states the fuel pump can fail causing loss of fuel pressure and an engine stall while driving. No remedy has been provided since the recall was issued in july 2025 (~9 m

NHTSA complaint #11731872
Feb 5, 2026lane departure, back over prevention

The wiring harness is rubbing against the bumper, causing it to wear and eventually cut through. This causes an error to my bsm/cross traffic alert. I have an extended warranty, but it doesn't cover it. This is a problem I have seen on the bronco6g forums.

NHTSA complaint #11715858
Jan 21, 2026forward collision avoidance, lane departure, back over prevention
While driving I lost most/all adas system. I received several alerts that kept repopulating. No cross traffic working no blind sport working no cruise control no forward collision working no lane departure working I took the rear assembly by the taillight and rear bumper. The wires and electrical components are corroded. Koons Ford annapolis maryland is requiring $1520 parts… Read more

While driving I lost most/all adas system. I received several alerts that kept repopulating. No cross traffic working no blind sport working no cruise control no forward collision working no lane departure working I took the rear assembly by the taillight and rear bumper. The wires and electrical components are corroded. Koons Ford annapolis maryland is requiring $1520 parts and labor.. This is a major safety problem as it was not designed correctly. Many Bronco owners are going through this..

NHTSA complaint #11712374
Jan 21, 2026electrical system, lane departure, back over prevention
I received an alert on the dash stating there was an issue with the blind spot monitoring/rear cross traffic system. It was erroring off and on for that entire drive. When I got home, I googled the issue and it appears it's a known issue with '21 and some early '22 broncos where they factory installed the blind spot module wiring harness too close to the rear bumper. Over… Read more

I received an alert on the dash stating there was an issue with the blind spot monitoring/rear cross traffic system. It was erroring off and on for that entire drive. When I got home, I googled the issue and it appears it's a known issue with '21 and some early '22 broncos where they factory installed the blind spot module wiring harness too close to the rear bumper. Over time, the wires rub and eventually rub bare and corrode or short out. I went out to take a look and sure enough, I had rubbed through on the driver side (photo) and the passenger side was nearly rubbed through. I have an extended warranty and it's at the dealership today. This is a manufacturing defect and should be covered (even if out of warranty) in my opinion. We will see what kind of story the dealer can come up with to wiggle out of it being covered under warranty.

NHTSA complaint #11712311
Jan 17, 2026electrical system, back over prevention
Bronco wire corrosion cross traffic refers to a known issue where wiring under the rear bumper, often for the blind spot/cross-traffic sensors, chafes, frays, and corrodes, causing system faults and failures, sometimes due to design flaws or environmental exposure to salt, requiring inspection and repair of the harness. This problem triggers error messages like "cross traffic… Read more

Bronco wire corrosion cross traffic refers to a known issue where wiring under the rear bumper, often for the blind spot/cross-traffic sensors, chafes, frays, and corrodes, causing system faults and failures, sometimes due to design flaws or environmental exposure to salt, requiring inspection and repair of the harness. This problem triggers error messages like "cross traffic system/blind spot system fault" in the instrument cluster, impacting safety features, with potential fixes involving harness repair, protective sheathing, or sensor replacement. My car’s wiring was corroded due to this flaw and required a repair exceeding $1,000.

NHTSA complaint #11711629
Dec 22, 2025electrical system, lane departure, back over prevention
Location of wiring from the factory for blind spot warning and cross traffic alert systems is not protected. The wiring has frayed and broken due to the wiring being unprotected, loose and rubbing on the rear bumper, causing the systems to not function. This is a blatant design defect from the factory, causing two safety systems to fail. Reporting now as, to the best of my… Read more

Location of wiring from the factory for blind spot warning and cross traffic alert systems is not protected. The wiring has frayed and broken due to the wiring being unprotected, loose and rubbing on the rear bumper, causing the systems to not function. This is a blatant design defect from the factory, causing two safety systems to fail. Reporting now as, to the best of my knowledge, the manufacturer has not issued a tsb or recall and dealerships have acknowledged the issue.

NHTSA complaint #11706454
Sep 22, 2025back over prevention
Rear view camera display when vehicle is in reverse will intermittently turn blue or black which renders the rear view camera useless. And at times will state camera unavailable. Vehicle is a 2021 Ford Bronco built on june 15, 2021 at Ford michigan build plant. I have contacted Ford related to this concern as I believe that the vehicle should fall under recall 23s48 for rear… Read more

Rear view camera display when vehicle is in reverse will intermittently turn blue or black which renders the rear view camera useless. And at times will state camera unavailable. Vehicle is a 2021 Ford Bronco built on june 15, 2021 at Ford michigan build plant. I have contacted Ford related to this concern as I believe that the vehicle should fall under recall 23s48 for rear camera replacement, and 25s49 for module updates related to rear camera display. The vehicle year, build date, assembly plant and symptoms all fit within the parameters of recall. Note that I also have a 2022 Bronco that these recalls are active on for the same concerns, the concern happens 7-8 times a week for the last 4-5 months. Dealership has contacted Ford sssc team about getting recalls activated on this vehicle and they are given the most basic responses stating that this vehicle is not included due to "certain model year vehicles" even though the vehicle is clearly within the model years outlined in both recalls. The rear view camera intermittently not working is a safety issue as it can stop working at any time when you would be using it to reverse. Thank you for your time and consideration when investigating this concen.

NHTSA complaint #11688956
Aug 28, 2025electrical system, lane departure, back over prevention
I have been getting a message that my blind spot and cross traffic alert deactivated because trailer is attached. I have never had a trailer attached but do have a trailer hitch- the dealer said Ford refuses to pay to have it fixed because the bumper to bumper warranty is out. The car has been garaged and has only 9,000 miles on it. This is a safety issue that I think they… Read more

I have been getting a message that my blind spot and cross traffic alert deactivated because trailer is attached. I have never had a trailer attached but do have a trailer hitch- the dealer said Ford refuses to pay to have it fixed because the bumper to bumper warranty is out. The car has been garaged and has only 9,000 miles on it. This is a safety issue that I think they should cover as I have no blind spot or cross traffic warnings.

NHTSA complaint #11683687
Jul 28, 2025electrical system, lane departure, back over prevention

Cross traffic and blind spot monitoring/alert failed. Electrical wiring failed due to rubbing on the rear bumper causing failure of blind spot alert and cross traffic alert systems. Reliance on these systems is critical to safe operation of the vehicle.

NHTSA complaint #11676692
Jul 14, 2025engine and engine cooling, fuel system, gasoline, back over prevention
The contact owns a 2021 Ford Bronco. The contact had received notifications of NHTSA campaign numbers: 24v635000 (engine and engine cooling), 25v025000 (suspension), 25v315000 (back over prevention) and 25v455000 (fuel system, gasoline); however, the parts to do the recall repairs were not yet available. The local dealer was made aware of the issue and confirmed that parts for… Read more

The contact owns a 2021 Ford Bronco. The contact had received notifications of NHTSA campaign numbers: 24v635000 (engine and engine cooling), 25v025000 (suspension), 25v315000 (back over prevention) and 25v455000 (fuel system, gasoline); however, the parts to do the recall repairs were not yet available. The local dealer was made aware of the issue and confirmed that parts for all four recalls were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that the rear camera intermittently displayed a distorted image while the vehicle was in reverse. The manufacturer was made aware of the issue. The failure mileage was unknown. VIN tool confirms parts not available for NHTSA campaign numbers: 25v025000, 25v315000, and 25v455000. Parts distribution disconnect for NHTSA campaign number: 24v635000.

NHTSA complaint #11673354
Jun 25, 2025lane departure, back over prevention
I had the cross-traffic sensor and blind spot detection sensors changed about a year after I bought my Bronco and the tech told me where the wires are housed it is wide open to the elements which cause the wires to fail. This was fixed under warranty and now 2 years later I have the same issue, and Ford will not fix since I am out of warranty. This is not only a design flaw… Read more

I had the cross-traffic sensor and blind spot detection sensors changed about a year after I bought my Bronco and the tech told me where the wires are housed it is wide open to the elements which cause the wires to fail. This was fixed under warranty and now 2 years later I have the same issue, and Ford will not fix since I am out of warranty. This is not only a design flaw but also a safety issue for someone who relies on those sensors to work.

NHTSA complaint #11669268
May 15, 2025lane departure, back over prevention

I am receiving blind spot and cross traffic failure alerts in my vehicle dashboard indicating these systems are not working properly. This is a known issue by many Bronco owners. I believe its due to a bad installation design where the wires naturally rub up against the bumper and with weather exposure they are failing.

NHTSA complaint #11661138
Jan 28, 2025back over prevention
The contact owns a 2021 Ford Bronco. The contact stated that while in reverse on several occasions, the back-over prevention camera failed to work as intended. The contact stated that on one occasion while in drive, the back-over prevention camera was displayed inadvertently. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure. The failure… Read more

The contact owns a 2021 Ford Bronco. The contact stated that while in reverse on several occasions, the back-over prevention camera failed to work as intended. The contact stated that on one occasion while in drive, the back-over prevention camera was displayed inadvertently. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure. The failure mileage was approximately 6,000. The VIN was not available.

NHTSA complaint #11639094
Dec 29, 2024lane departure, back over prevention, forward collision avoidance

The vehicle will throw a warning saying the cross trafic collision is in operable. A Ford tech looked at it and said a wiring harness is chaffed causing blind spot monitioring and cross traffic collision systems to not work. Cost of the part only is $700, not including labor. This is a very serious fault, which could result in injury and fatalitys

NHTSA complaint #11632944
Aug 22, 2024back over prevention
The contact owns a 2021 Ford Bronco. The contact received notification of NHTSA campaign number: 23v165000 (back over prevention); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet… Read more

The contact owns a 2021 Ford Bronco. The contact received notification of NHTSA campaign number: 23v165000 (back over prevention); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. Parts distribution disconnect.

NHTSA complaint #11610145
Feb 5, 2024back over prevention
The contact owns a 2021 Ford Bronco. The contact received notification of NHTSA campaign number: 23v165000 (back over prevention) however, the part to do the recall repair was not yet available. The local dealer and two unknown dealers were contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was… Read more

The contact owns a 2021 Ford Bronco. The contact received notification of NHTSA campaign number: 23v165000 (back over prevention) however, the part to do the recall repair was not yet available. The local dealer and two unknown dealers were contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue and referred the contact to the NHTSA hotline for assistance. The contact had not experienced a failure. Parts distribution disconnect.

NHTSA complaint #11570118
Jan 24, 2024back over prevention
The contact owns a 2021 Ford Bronco. The contact received notification of NHTSA campaign number: 23v165000 (back over prevention) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was contacted it was confirmed that the software to perform the… Read more

The contact owns a 2021 Ford Bronco. The contact received notification of NHTSA campaign number: 23v165000 (back over prevention) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was contacted it was confirmed that the software to perform the update was not available. The manufacturer was made aware of the issue, and it was confirmed that the parts to perform the software updates were not available. The contact had not experienced a failure. Parts distribution disconnect.

NHTSA complaint #11567524
Nov 27, 2023back over prevention

The contact owns a 2021 Ford Bronco. The contact received notification of NHTSA campaign number: 23v598000 (back over prevention) however the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.

NHTSA complaint #11557072
Jul 17, 2023unknown or other, back over prevention
In late march 2023, the touchscreen on my Bronco went dead, along with the USB ports in the console below. With the dead screen, I have no back up camera, which is a huge safety concern. Also, all other features managed by the touch screen are gone (no radio, no navigation, no hands free phone usage, etc.). I have been to the dealer twice, and they said we just have to… Read more

In late march 2023, the touchscreen on my Bronco went dead, along with the USB ports in the console below. With the dead screen, I have no back up camera, which is a huge safety concern. Also, all other features managed by the touch screen are gone (no radio, no navigation, no hands free phone usage, etc.). I have been to the dealer twice, and they said we just have to wait for Ford engineers to send a patch to the sync system, because they think it has interfered with the apim module. This may or may not be related to the open recall 22c27, because that is not the same issue as mine. But Ford just is telling me to wait for that recall to be completed, but for four months and counting they have not provided a patch for the 8-inch screen model that I have. I have been given no other options except potential buy back of the vehicle.

NHTSA complaint #11532834
Jun 30, 2023back over prevention
The contact owns a 2021 Ford Bronco. The contact received notification of NHTSA campaign number: 22v825000 (back over prevention) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure but stated that the VIN was not… Read more

The contact owns a 2021 Ford Bronco. The contact received notification of NHTSA campaign number: 22v825000 (back over prevention) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure but stated that the VIN was not included in the recall as per the information in their system. The contact had not experienced a failure. Parts distribution disconnect.

NHTSA complaint #11529807
May 3, 2023back over prevention
The contact owns a 2021 Ford Bronco. The contact stated that he received notification of NHTSA campaign number: 23v165000 (back over prevention) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware… Read more

The contact owns a 2021 Ford Bronco. The contact stated that he received notification of NHTSA campaign number: 23v165000 (back over prevention) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. The VIN tool showed no recall associated with the VIN.

NHTSA complaint #11520203
Apr 11, 2023unknown or other, visibility/wiper, back over prevention
Sync 4 system has a critical issue that Ford has not fixed and is a known issue in many sync 4 systems. This causes the system to reboot at random times and reload. This includes being black and not working for many minutes so the rear camera and cross traffic do not function at all. This is a safety issue as with most suvs the rear is a huge blind spot. Ford has not been able… Read more

Sync 4 system has a critical issue that Ford has not fixed and is a known issue in many sync 4 systems. This causes the system to reboot at random times and reload. This includes being black and not working for many minutes so the rear camera and cross traffic do not function at all. This is a safety issue as with most suvs the rear is a huge blind spot. Ford has not been able to update my system with a recall issued for safety concerning a different issue and the rear view camera. Ford will not replace the unit until they have sent out an update that is unknown release date. I have spoke to Ford reps and two dealerships and all refuse to fix the radio to allow for normal function.

NHTSA complaint #11516449
Jan 3, 2023unknown or other, back over prevention
Ford has a recall for rearview camera issues. They say my VIN# is not included yet I have the same problem after backing up in 4-low has ended, the back camera stays on when moving forward. The recall notice that I am not suposed to need is 22c27. I have experienced this in the off roading in colorado. To reset the camera, I have to move to a safe spot, shut off the… Read more

Ford has a recall for rearview camera issues. They say my VIN# is not included yet I have the same problem after backing up in 4-low has ended, the back camera stays on when moving forward. The recall notice that I am not suposed to need is 22c27. I have experienced this in the off roading in colorado. To reset the camera, I have to move to a safe spot, shut off the engine, and restart. The camera resets to normal until I back up in low gear again. Talked to someone at the Ford custome service was told over and over again I was not included. Asked about reporting my problem and they would not. So giving you the info..;.

NHTSA complaint #11499967
← All 2021 Ford Bronco problems & recalls