CarProblemsDB

2003 Dodge RAM engine problems

14 owners reported engine & cooling problems — 8% of all 175 complaints about the 2003 Dodge RAM.

Engine & cooling complaints by Dodge RAM year

20101
20091
20085
20073
20062
200516
20046
200314
200214
200129
200015

What owners report

Apr 22, 2016engine

While driving the valve spring broke and dropped the valve into the cylinder causing engine damage. This is a common problem on the 5.7 hemi engine . One that Dodge is well aware of . There should be some sort of favor given on the matter . Out of all the engines I have owned as well as worked on this is the only that has had this as a common failure and it really needs to be addressed.

NHTSA complaint #10860937
Nov 30, 2005engine and engine cooling
Sept. 2004 bought 2003 Dodge quad cab w/hemi. Had approximately 34,000 miles on it. Truck was in great shape,ran good,drove good. Then in oct,2005,had a valve spring break on left side of motor,causing motor to lock-up. At this time the truck had 84,400 miles on it. We live 30 miles from our jobs,so we put a lot of miles on our vehicles. I called daimler-chrysler to see… Read more

Sept. 2004 bought 2003 Dodge quad cab w/hemi. Had approximately 34,000 miles on it. Truck was in great shape,ran good,drove good. Then in oct,2005,had a valve spring break on left side of motor,causing motor to lock-up. At this time the truck had 84,400 miles on it. We live 30 miles from our jobs,so we put a lot of miles on our vehicles. I called daimler-chrysler to see if they would either fix the truck,or at least help with the repairs(after all,you would think that a hemi motor should be good for a lot longer than 80,000 miles).daimler-chrysler said that they would need "a certified Dodge dealership"to check out the truck to see what exactly happened and why it happened. I had the truck towed to the local dealership(savannah Dodge,savannah,ga).they confirmed the broken valve spring and broken valve. The mechanic at the dealership said that he has seen a few of these same problems,and the fix is to replace the head(it was damaged)use new valves and valve springs(with new"heavy-duty" valve springs).he also suggested that I replace the valve springs on the other head with these new"heavy-duty"valve springs. I called daimler-chrysler again and told them what their five-star dealership said. After calling daimler-chrysler several more times,they said that they(daimler-chrysler)would call the dealership and then decide if they would or could help with the repairs. Needless to say,I had to call daimler-chrysler back(they do not return phone calls)they said that they wo

NHTSA complaint #10144096
Dec 10, 2004engine and engine cooling

The check engine light appeared on the dashboard and remained on. Then, vehicle stalled. Consumer was unable to restart vehicle, and it was towed to the dealer. Mechanic determined that the engine needed to be replaced. *ak

NHTSA complaint #10103548
Oct 20, 2004engine and engine cooling

When driving 25 MPH, the vehicle stalled. The consumer was able to restart the vehicle. Please provide more information. **jb

NHTSA complaint #10097227
Jul 18, 2004suspension, service brakes, hydraulic, engine and engine cooling, fuel system, gasoline, power train, electrical system
I own a 2003 Dodge RAM 1500 4x4 quad cab slt VIN 1d7-hu18n53s-188168 assembly point, warren, michigan. The truck stalled while in traffic making a 10-15 MPH right turn. The second occurence was july15, 2004. Very close call here. I was in the smokey mountains camping. The six hour drive home towing my popup was nerve racking to say the least. Especially, since my 13, 6… Read more

I own a 2003 Dodge RAM 1500 4x4 quad cab slt VIN 1d7-hu18n53s-188168 assembly point, warren, michigan. The truck stalled while in traffic making a 10-15 MPH right turn. The second occurence was july15, 2004. Very close call here. I was in the smokey mountains camping. The six hour drive home towing my popup was nerve racking to say the least. Especially, since my 13, 6 and 3 year old were in the truck. I mentioned that the truck runs extremely rough intermittently to the dealer morgan Dodge durham north carolina on at least two occasions. I am also experiencing an intermittent shudder that seems to be coming from the transmission, also mentioned to the dealer on at least two occasions. The dealer simply said that they could not reproduce the shudder or stall. I also had a severe brake pulsation. They did replace front pads and calipers and cut rotors. They were supposed to follow up with me regarding the shudder and stall but as of this date, 7/18/2004 I have not yet receive a call back.

NHTSA complaint #10081297
Jul 14, 2004engine and engine cooling

When accelerating from a stop vehicle would only go 5-10 MPH. Consumer would have to restart the vehicle to temporarily fix the problem. Dealership was notified, but did not resolve the problem. *ak

NHTSA complaint #10081965
Jul 9, 2004engine and engine cooling

While driving 60 MPH vehicle shut off. As a result, consumer had to coast off the road. *ak when the vehicle shuts down there was no power steering or brakes. The vehicle has been taken to the dealer but they have been unable to duplicate or correct the problem. *nm

NHTSA complaint #10081633
Apr 20, 2004steering, engine and engine cooling, power train

Numerous problems with 2003 Dodge RAM since ownership. *ph the consumer experienced a stalling problem that occurred whenever the vehicle was coming to a stop or idling. The vehicle was taken to the dealer who could not diagnose the problem. Power steering fluid leaked due to faulty clamp. The vehicle was leaking transmission fluid due to a faulty output seal at the transfer case. *nm

NHTSA complaint #10071449
Apr 13, 2004engine and engine cooling

While starting up the vehicle engine idled on its own. Also, when coming to stop vehicle stalled. Consumer tried to restart, and was able to start vehicle and drive it to the dealer for inspection. However, mechanic could not duplicate or resolve the problem. *ak

NHTSA complaint #10067115
Jan 24, 2004service brakes, hydraulic, engine and engine cooling
I own a 2003 Dodge RAM 1500 quad cab 4x4. Recently while driving at slow speeds, the engine died. I restarted and heard a load clanking sound from the right side of the engine. The noise sounded like a connecting rod knock. I contacted roadside assistance and they arranged to have the vehicle towed to the dealership. When we arrived at the dealer, the mechanic could not… Read more

I own a 2003 Dodge RAM 1500 quad cab 4x4. Recently while driving at slow speeds, the engine died. I restarted and heard a load clanking sound from the right side of the engine. The noise sounded like a connecting rod knock. I contacted roadside assistance and they arranged to have the vehicle towed to the dealership. When we arrived at the dealer, the mechanic could not get it started. When he finally got it started, the engine locked up. The engine was torn down and it was discovered that the valve spring on the intake valve for the #6 cylinder had broken in two, the valve had dropped into the cylinder, flipped over, punctured a hole in the #6 piston and snapped in half. The dealer, fenton auto group in pampa, texas has done a great job of arranging for a loaner car, and getting the mechanic to work on it immediately. Dodge is repairing under warranty a brand new short block, brand new passenger side head, valve spring and valve. They were able to get the parts immediately (the next day) and plan to have it repaired quickly. My complaint is that if I were building or rebuilding and engine that had a broken valve spring problem that I would replace every valve spring on the entire engine. An ounce of prevention is worth a pound of cure and a couple hundred dollars could save several thousand later. Secondly, I think I am entitled to some sort of compensation for the loss of the use of my pickup in the way of an extended warranty at no charge, service contract etc

NHTSA complaint #10054807
Dec 18, 2003engine and engine cooling, fuel system, gasoline, power train, electrical system
When going from reverse to drive, at times engine idles rough and rpm's drop to about 350-400 rpm. Approximately 75% of the time it happens the engine quits. The other 25% of the time it happens the rpm's increase after a short period of time (20seconds to 1 minute) and if still in gear the truck will lurch forward when rpms increase. Pressing the accelerator to increase… Read more

When going from reverse to drive, at times engine idles rough and rpm's drop to about 350-400 rpm. Approximately 75% of the time it happens the engine quits. The other 25% of the time it happens the rpm's increase after a short period of time (20seconds to 1 minute) and if still in gear the truck will lurch forward when rpms increase. Pressing the accelerator to increase rpm's does not affect rpm's when engine is stumbling and truck will not move. Dealer has been notified, known problem with engine programming. Problem has existed since truck was new.*ak

NHTSA complaint #10050717
Oct 24, 2003engine and engine cooling
2003 Dodge hemi 4x4 quadcab longbox slt 1st. When the pickup runs from day one it has a semi-loud engine noise that comes from the drivers side of the engine that Dodge service technicians have tried to repair several times but can't. 2nd. The pickup has 3 times since new, shuttered when backing up, then shuttered going forward when finally clearing its self running fine. … Read more

2003 Dodge hemi 4x4 quadcab longbox slt 1st. When the pickup runs from day one it has a semi-loud engine noise that comes from the drivers side of the engine that Dodge service technicians have tried to repair several times but can't. 2nd. The pickup has 3 times since new, shuttered when backing up, then shuttered going forward when finally clearing its self running fine. 3rd. When we pull grades with the pickup then need to go down hill or on a flat, the pickup will surge noticeable on the tach and by listening to the engine run. No runaways so far. The pickup has been in the Dodge repair shop many times for repairs and I still do not have it back. As of today 10/24/03 I have been without my pickup this last time for 7 days and have yet to hear anything from the service department at Dodge. I think this pick-up needs to go back to the factory. Believe it or not I still like the darn thing. I need help and advice as to what needs to be done? Thank you. Jj. *la

NHTSA complaint #10043541
Jun 6, 2003engine and engine cooling

The consumer was self inspecting the vehicle and he noticed the fluid level was reading low. *ak

NHTSA complaint #10022611
May 15, 2003engine and engine cooling

While driving the check engine light illuminated. *nlm

NHTSA complaint #10019966
← All 2003 Dodge RAM problems & recalls