The driver seat moves forward when braking. It is dangerous in the event of hard braking and the seat moves forward. This can cause the driver to apply more force on the brake than intended. The 'movement' is due to worn parts in the electric lift and/or electric forward/backward positioning mechanism(s). The movement is not due to the electric motors doing the movement.
2000 Dodge Durango seats problems
32 owners reported seats problems — 3% of all 1,073 complaints about the 2000 Dodge Durango.
Seats complaints by Dodge Durango year
What owners report
Sliding my driver seat back and front when braking.
A few months back, the front driver's seat began to slide forward when braking and then back once starting up again -- whether city street or freeway driving. It feels like it moves an inch or so. It is a 2000. It began before 78,000 miles. I purchased the car from parents in 2010 and it did not have any issues until suddenly it moved when braking. Seat should be stable. I see this is a common issue with this model.
Drivers power seat 'slack". When you apply brakes to stop, the seat slides forward then returns back after the stopping motion ends. This affects the drivers seat position and braking action. In an accident this will put the driver closer to the steering wheel and air bag. Suspension- driving on the freeway , if you encounter bumpy or rough roads on a curve the car will… Read more
Drivers power seat 'slack". When you apply brakes to stop, the seat slides forward then returns back after the stopping motion ends. This affects the drivers seat position and braking action. In an accident this will put the driver closer to the steering wheel and air bag. Suspension- driving on the freeway , if you encounter bumpy or rough roads on a curve the car will sometimes slip sideways a bit, it's enough to startle you for a moment.
First off, the power driver seat moves with the motion of the car about a 1/2" forward and back. It has been told to me that a spacer is needed to be installed in the mechanism. Second and more important is the engine cuts off when the car is decelerating; all power to the car is impeded. The car will not restart immediately.
While driving the vehicle on the interstate, I applied the brakes and the front seat shifted forward. A driver seat should be stationary and not rock forward when you driving. Definitely a safety hazard. *tr
Just recently I noticed the following problem with my driver's seat. After I select the correct seat position by pressing the button on the bottom left of the seat to move forward or backwards; the seat slides back and forth when I have to brake or stop. This problem is potentially dangerous in the event I have to stop/brake suddenly. From what I have read on the internet,… Read more
Just recently I noticed the following problem with my driver's seat. After I select the correct seat position by pressing the button on the bottom left of the seat to move forward or backwards; the seat slides back and forth when I have to brake or stop. This problem is potentially dangerous in the event I have to stop/brake suddenly. From what I have read on the internet, this problem is common with the Dodge Durango and is caused by loose track rails attached underneath the driver's seat. Is this a defect in the Dodge Durango? If so, there should be a recall to fix this problem. *tr
Tl* the contact owns a 2000 Dodge Durango. The contact stated that the front driver's seat slid forward and jerked while braking. The vehicle was not taken to the dealer. The manufacturer was not made aware of the failure. The vehicle was not repaired. The failure mileage was unknown and the current mileage was 150,000.
2000 Dodge Durango drivers side electric seat rocking chair effect. There is acme tread long screw (worm gear) between the top and bottom track. The front of the acme screw rests in a plastic bearing. There is a gear aluminum case from which a small transmission cable attaches to the front of the worm gear; both ends of the cable have a square shape.the cable is not attached… Read more
2000 Dodge Durango drivers side electric seat rocking chair effect. There is acme tread long screw (worm gear) between the top and bottom track. The front of the acme screw rests in a plastic bearing. There is a gear aluminum case from which a small transmission cable attaches to the front of the worm gear; both ends of the cable have a square shape.the cable is not attached to either end. It just slides in or out either side. Inside between the tracks there is an aluminum case that is held in place with 2 torque screws to the track. The problem: inside of the aluminum piece there is supposed to be a filler possibly made of rubber, which is affected by the grease and disintegrates over time. You will not find pieces of broken plastic or rubber, the rubber has become some sort of asphalt with the grease. Because of the lack of the filler between the nut and the interior of the aluminum casing, there is gap which allows the seat to move back and forward like a rocking chair. *tr
2000 Dodge Durango slt / 2wd / 8 cyl 5.9l - vehicle mileage 65,000; the following oem components / parts are defective / broken / worn prematurely causing other parts / components / systems to fail, brake & should be recalled, serviced, replaced by daimler chrysler, llc at their expense (no wonder they needed bailout $): 3) drivers power seat track has excessive motion when… Read more
2000 Dodge Durango slt / 2wd / 8 cyl 5.9l - vehicle mileage 65,000; the following oem components / parts are defective / broken / worn prematurely causing other parts / components / systems to fail, brake & should be recalled, serviced, replaced by daimler chrysler, llc at their expense (no wonder they needed bailout $): 3) drivers power seat track has excessive motion when accelerating & stopping causing seat to slide forward / backward - possibly causing accident; *tr
2000 Dodge Durango slt drivers power seat "rocking" during braking and acceleration. During braking, seat moving forward cause excess braking and steering movements. *tr
Tl*the contact owns a 2000 Dodge Durango. The contact was driving approximately between 35-40 MPH, and when the brake pedal was applied the front drivers seat slightly began to travel backwards and failed to remain secure in the adjusted position; however, the contact was able to continue driving. On a separate occasion the front drivers side seat rocked in a back and forth… Read more
Tl*the contact owns a 2000 Dodge Durango. The contact was driving approximately between 35-40 MPH, and when the brake pedal was applied the front drivers seat slightly began to travel backwards and failed to remain secure in the adjusted position; however, the contact was able to continue driving. On a separate occasion the front drivers side seat rocked in a back and forth motion. The failure occurred continuously. The vehicle was taken to an independent mechanic and was not repaired. Currently, the vehicle was not being driven. The failure mileage was unknown.
Driver side seat when stopping will slide forward and jolt. Causing driver to hit brakes hard and then release. Have not replaced any parts yet but when I do replace I will save old part. *tr
I own a 2000 Durango slt with the "rocking seat" problem. Driver's side seat slides in the rail approximately 1 inch when accelerating or stopping, unless the seat is positioned at the extreme forward or rearward positions. The problem started at approximately 38,000 miles and getting worst as time goes on. On inspection, I found the aluminum sliders attached to the gear… Read more
I own a 2000 Durango slt with the "rocking seat" problem. Driver's side seat slides in the rail approximately 1 inch when accelerating or stopping, unless the seat is positioned at the extreme forward or rearward positions. The problem started at approximately 38,000 miles and getting worst as time goes on. On inspection, I found the aluminum sliders attached to the gear drives for both left and right sides to be worn out, causing the front to rear slippage. Research shows this to be a very common issue, as there are multiple complaints file with your organization. I believe that this could be a very serious safety issue that needs to be addressed. Hopefully no one has been injured by this defect that Dodge knows well about. I believe a recall or repair kit is in order here. Luckily I do not drive this vehicle very much. *tr
Drivers seat slides back and forth about 1/2 inch when I hit the brakes. Dealer says entire seat needs to be replaced. Started spontaneously (car in no accidents and not used off road). *tr
Drivers seat track I replaces it on my 200 Durango again for the 3rd time about a year ago and now it happened again the seat rocks forward and backwards while driving this should be a recall cause I talked to several people that own a Durango and they said it happen to them to please help. *tr
2000 Dodge Durango driver's (power) seat moves about an inch forward when braking and backwards when accelerating. I feel very unsafe with this movement, as it is really unnerving while trying to brake in a safe manner. According to a few websites, this is a constant problem with 98 - 03 Dodge's, due to a cracked seat track. This seems to be something that really needs to be… Read more
2000 Dodge Durango driver's (power) seat moves about an inch forward when braking and backwards when accelerating. I feel very unsafe with this movement, as it is really unnerving while trying to brake in a safe manner. According to a few websites, this is a constant problem with 98 - 03 Dodge's, due to a cracked seat track. This seems to be something that really needs to be recalled and taken care of before a deadly accident occurs. *tr
2000 Dodge Durango with 75,000 miles the drivers side power seat bracket became loose. Slid forward with braking, back when accelerating. Parts were on back-order due to the part. If they could get the part in it was over $600.00 just for the part not counting istallation. *ak
I purchased the vehicle in nov 2000. Twice since I have had the vehicle, the mounting brackets have broke while adjusting in the seat. I have replaced the seats once. *nm
2002 Dodge Durango power seat track failed. *kb ***nar*** the seat would rock back and forth about an inch when braking or accelerating. The seat track has been replaced twice so far. The consumer replaced the tracks himself. While replacing the most recent track the consumer noticed that the seat frame was fractured in two area. The seat frame had to be welded before the tracks could be replaced. *nm
(1) I loaded some wood in the back of my Durango. (2) as I was braking to a stop, the rear seat collapsed forward, pinning my child in her car seat against the back of the seat in front of her. (3) nothing. I just unloaded the material I was carrying and left it.
While driving at 35 MPH consumer's vehicle was rear ended by another vehicle while waiting at traffic light. This caused the seat mound to separate and driver collapsed in the rear seat. The bolts that held the seat broke in half on both sides. Driver was admitted to the hospital with back pains.*ak
My children and I were involved in an auto accident in which we were hit in the rear, and then hit the car in front of us, which also hit the car in front of them.our 2000 Dodge Durango appears to have faulty safety mechanisms, and other hazards, for neither air bag deployed, and both front seats collapsed.*ak
Finger was severed while trying to fold seat to move. Dealer notified.*ak
Consumer's finger was cut off while trying to lift seat and fold to get to rear seating area. Dealer was notified. Please provide more information. *ak
My 2yr old daughter was seatbelted in middle seat in a car seat. When I had the wreck, the seatbelt that was holding the carseat came unbuckled. My mother was sitting back there, and she caught my daughter. The third seat in the Durango had bent all the way up to the middle seat. I am also having a hard time getting my insurance to replace any seatbelts or the carseat. What can I do?*ak