Mar 13, 2026service brakes, hydraulic
The contact owns a 1998 n/a Dodge Dakota. The contact stated that while at the dmv to renew the tags, the contact was unable to register the vehicle because the vehicle was under recall. The contact referenced NHTSA campaign number: 00v193000 (service brakes, hydraulic); however, the part to do the recall repair was not yet available. The local dealer was contacted. The… Read more
The contact owns a 1998 n/a Dodge Dakota. The contact stated that while at the dmv to renew the tags, the contact was unable to register the vehicle because the vehicle was under recall. The contact referenced NHTSA campaign number: 00v193000 (service brakes, hydraulic); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The failure mileage was 163,159.
NHTSA complaint #11724216
Jul 15, 2018steering, unknown or other, service brakes
"takata recall" the power steering continues to leak even after several repairs have been made.
NHTSA complaint #11111463
Dec 24, 2014steering, service brakes
Tl* the contact owns a 2000 Dodge Dakota. The contact stated that there was inadequate clearance between the front driver side brake tube and the power steering hose, which caused the power steering hose to become punctured. The contact referenced NHTSA campaign number: 00v193000 (service brakes, hydraulic). The vehicle was not diagnosed or repaired. The manufacturer was not… Read more
Tl* the contact owns a 2000 Dodge Dakota. The contact stated that there was inadequate clearance between the front driver side brake tube and the power steering hose, which caused the power steering hose to become punctured. The contact referenced NHTSA campaign number: 00v193000 (service brakes, hydraulic). The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The failure mileage was 200,000.
NHTSA complaint #10668159
Jul 8, 2014service brakes
Brake lines rusted-lost all the fluid. The brake lines had to be replaced and fabricated by the repair shop. *js
NHTSA complaint #10608945
Jun 4, 2014service brakes
My front brakes keep sticking. This is the third time it's happened. I've replaced the pads, calipers, discs and lines twice now. I just finished that repair about 5000 miles ago because of the same problem. Last week, smoke pours out of my front right wheel well, and the truck is pulling and vibrating.....same issue. Why does my truck keep doing this? *tr
NHTSA complaint #10595978
Aug 13, 2012service brakesFire
Tl* the contact owns a 2000 Dodge Dakota. The contact stated while driving various speeds with the brake pedal engaged, the front brakes locked without warning and a strong burning odor and smoke emitted. The failure was experienced several times. The rotors, calipers and master cylinder were replaced twice. The failure was not corrected. The vehicle continued to smoke when… Read more
Tl* the contact owns a 2000 Dodge Dakota. The contact stated while driving various speeds with the brake pedal engaged, the front brakes locked without warning and a strong burning odor and smoke emitted. The failure was experienced several times. The rotors, calipers and master cylinder were replaced twice. The failure was not corrected. The vehicle continued to smoke when the brakes were applied. The manufacturer was made aware of the failure. The vehicle was not repaired. The failure mileage was 40,000 and the current mileage was 48,000.
NHTSA complaint #10470356
Jan 19, 2011service brakes, hydraulic
Tl* the contact owns a 2000 Dodge Dakota . The contact stated that while driving 50 MPH, the front wheels locked up. The front calipers needed to be replaced the failure mileage was 140,000 and the current mileage was 165,000. Updated 04/22/11
NHTSA complaint #10377162
Oct 12, 2010service brakes, hydraulic
2000 Dodge Dakota slt. Very low mileage 36,300 events leading to failure: driving failure: brake line rusted through to point of failure. First occurrence in this truck. Almost hit another vehicle. Spilled brake fluid on a 2 mile drive to work. Did not know was spilling. Warning light came on only after failure (possible during) correction: buying parts to fix broken… Read more
2000 Dodge Dakota slt. Very low mileage 36,300 events leading to failure: driving failure: brake line rusted through to point of failure. First occurrence in this truck. Almost hit another vehicle. Spilled brake fluid on a 2 mile drive to work. Did not know was spilling. Warning light came on only after failure (possible during) correction: buying parts to fix broken line. Other lines look bad also, may need replaced soon. Have to wait another week for another payday. Should be a safety recall!!!. This happened to my father in his 1999 Dodge Dakota,so this is nothing new. *tr
NHTSA complaint #10360182
Jul 1, 2010service brakes, hydraulic
Brake lines totally rusted out all over truck at 70k;have contacted NHTSA before about terrible oem quality vs rust of brake lines. Please mandate stainless lines and brass or stainless fittings .~ 5$ per car, save 1000's of lives. The present "protection" coatings on steel are truly useless. NHTSA replied they are "too expensive" last time. I checked costs actual… Read more
Brake lines totally rusted out all over truck at 70k;have contacted NHTSA before about terrible oem quality vs rust of brake lines. Please mandate stainless lines and brass or stainless fittings .~ 5$ per car, save 1000's of lives. The present "protection" coatings on steel are truly useless. NHTSA replied they are "too expensive" last time. I checked costs actual quoted cost difference on 25 feet of tubing was about 8$. Far more important than anything else you can do. *tr
NHTSA complaint #10341005
Sep 14, 2009service brakes, hydraulic, tiresCrash
Rotors turned and then warped/wore set of pads down to bare metal in less than 20,000 miles. Rotors were warped at 32,000 (at time of purchase), 50,000, 63,000, and 80,000. Rear brakes replaced at same interval as front brakes, but hardly any wear was present at time of malfunction of front brakes. All other brake components inspected, no other failures noted. Failure… Read more
Rotors turned and then warped/wore set of pads down to bare metal in less than 20,000 miles. Rotors were warped at 32,000 (at time of purchase), 50,000, 63,000, and 80,000. Rear brakes replaced at same interval as front brakes, but hardly any wear was present at time of malfunction of front brakes. All other brake components inspected, no other failures noted. Failure caused an accident due to the brakes giving out. Rwal does not function. No system indication to malfunction. Pulled fuse, and system faults as normal. Extremely poor brake performance/endurance. *tr
NHTSA complaint #10283956
Aug 6, 2008service brakes, hydraulic
Tl*the contact owns a 2000 Dodge Dakota quad cab. While driving 55-60 MPH, the contact smelled hot brake fluid and noticed that the brake pads were grinding into the rotor. The vehicle was towed to his residence. Upon further investigation, the contact discovered a defect in the knuckle of the vehicle. The VIN was unknown. The failure mileage was 169,000 and current mileage was 169,015.
NHTSA complaint #10237235
Jul 22, 2008service brakes, hydraulicCrash
No specific crashes that I am personally aware of, but there have surely been many, possibly attributed to other causes. The failure-severely rusted brake fluid lines which have caused loss of braking. It occurs very frequently in the 'rust belt states', ie massachusetts for example. Repair involves replacing rusted lines and related parts, usually at substantial cost to… Read more
No specific crashes that I am personally aware of, but there have surely been many, possibly attributed to other causes. The failure-severely rusted brake fluid lines which have caused loss of braking. It occurs very frequently in the 'rust belt states', ie massachusetts for example. Repair involves replacing rusted lines and related parts, usually at substantial cost to vehicle owner. The reason for reporting this problem is that I am a repair shop owner with over 40 years in business, and I am seeing more of this problem every day. It constitutes a substantial percentage of my shop's business. *tr
NHTSA complaint #10235392
Sep 17, 2007service brakes, hydraulic, structure
Tl*the contact owns a 2000 Dodge Dakota. While driving 2 MPH, the vehicle failed to stop when the brakes were applied. The contact applied the emergency brake in order to stop the vehicle. The vehicle was towed to a repair shop and the mechanic stated that the metallic brake line was rusted. The mechanic replaced the brake line. The current and failure mileages were… Read more
Tl*the contact owns a 2000 Dodge Dakota. While driving 2 MPH, the vehicle failed to stop when the brakes were applied. The contact applied the emergency brake in order to stop the vehicle. The vehicle was towed to a repair shop and the mechanic stated that the metallic brake line was rusted. The mechanic replaced the brake line. The current and failure mileages were 92,000. The consumer stated had 2 front brake lines plus second line between junction blocks replaced by the dealer and after inspection revealed additional rust. Updated 11/20/07 *tr
NHTSA complaint #10203171
Mar 18, 2007service brakes, hydraulic
Rotors and front brake pads wear out prematurly. Rotor wear indicates the problem seems to be with the caliper primarily applying preassure from the piston side while the oposing side seems to bind. Rear brakes are still original while front have been replaced 3 times.
NHTSA complaint #10185451
Jan 25, 2007service brakes, hydraulic, seat beltsCrash1 injured
Tl*- the contact stated that while driving her 2000 Dodge Dakota (139000 failure mileage) at 50 MPH in the light rain, she attempted to go around a slightly sharp curve, but the curve turned out to be sharper than expected. When the contacts applied the brakes heavily the wheels locked, and the contact skidded, hitting the embankment. After the crash, in the process of… Read more
Tl*- the contact stated that while driving her 2000 Dodge Dakota (139000 failure mileage) at 50 MPH in the light rain, she attempted to go around a slightly sharp curve, but the curve turned out to be sharper than expected. When the contacts applied the brakes heavily the wheels locked, and the contact skidded, hitting the embankment. After the crash, in the process of exiting the vehicle, the contact noticed that the seat belt belt did not tighten to secure the occupant in the seat. As a result, she hit her head on the windshield. *ak
NHTSA complaint #10180691
Aug 22, 2006suspension, service brakes, hydraulic
I own a 2000 Dodge Dakota 2wd. There are defective ball joints on the front end. There was a recall on 4wd dakotas, however, there has been no recall for the ball joints on the 2wd models. There was an "extended warranty" that was silently (as in I never knew there was an issue) on the ball joints on the 2wd models. I have had 6 years of continuous trouble with the front end… Read more
I own a 2000 Dodge Dakota 2wd. There are defective ball joints on the front end. There was a recall on 4wd dakotas, however, there has been no recall for the ball joints on the 2wd models. There was an "extended warranty" that was silently (as in I never knew there was an issue) on the ball joints on the 2wd models. I have had 6 years of continuous trouble with the front end of the vehicle (I bought it brand new 07/2000). As in I have replaced the rotors on the front end at least every 3 months for the first 18 months of owning it. I have had it aligned (front and rear alignments) over a half dozen times. All work done in the first 18 months was done at the dealer, who should have been, and probably was made aware of the issue. After 18 months of paying to fix the problem (out of my own pocket because Dodge's warranty isn't worth the paper it's written on) I conceded defeat (and took the word of the dealer) that nothing was wrong, and there was nothing to worry about but maintaining the rotors and purchasing new tires ever 12-16 months. When made aware of the problem, Dodge is unwilling to correct the defect. If no one has died, there is no problem. Let all buyers beware, safety is not always the most important issue. *jb
NHTSA complaint #10166250
Feb 13, 2006suspension, service brakes, hydraulic
2000 Dodge Dakota constant mechanical failure due to the type of rotors, brake pads, and ball joints they use. They use inferior products that do not last on a vehicle based on normal wear and tear. Have to constantly replace brake pads and rotors about every 20,000 miles. That is not acceptable. Dodge products from the earlier years really suck. I am not sure about the newest models such as 2004 and 2005. *nm
NHTSA complaint #10150196
Jan 20, 2006service brakes, hydraulic
When the truck is started the rear drum brakes have a tendency to lock upon first braking. ABS does not engage when this happens. Brake operation normal afterwards. Had an ase mechanic adjust drums problem returned four months later. Front rotors have warped twice. First time the rotors were replaced at approximately 2 years/25k mileage. Rotors were replaced again 2… Read more
When the truck is started the rear drum brakes have a tendency to lock upon first braking. ABS does not engage when this happens. Brake operation normal afterwards. Had an ase mechanic adjust drums problem returned four months later. Front rotors have warped twice. First time the rotors were replaced at approximately 2 years/25k mileage. Rotors were replaced again 2 years later/50k mileage. Rear drums are not adjusting properly. *jb
NHTSA complaint #10148203
Oct 20, 2005service brakes, hydraulic
Brake failure due to rusted brake pipes. *jb
NHTSA complaint #10140332
Sep 3, 2005service brakes, hydraulic
Brakes, out of round or warped rotors and drums, prevents smooth stopping and locks-up individual wheels. Front rotors and rear drums replaced twice in 50k miles, and worn out again. *jb
NHTSA complaint #10135261
Apr 16, 2005service brakes, hydraulic
Vibrations during braking at high and low speeds. Pulsing while depressing brake pedal. Today the right front brake overheated while driving at highway speed on level road. The disc brakes were locked up on the rotor and would not release. Appears to be a failure within the caliper??? I have heard several other reports of similar incidents of this type. Is this a design flaw… Read more
Vibrations during braking at high and low speeds. Pulsing while depressing brake pedal. Today the right front brake overheated while driving at highway speed on level road. The disc brakes were locked up on the rotor and would not release. Appears to be a failure within the caliper??? I have heard several other reports of similar incidents of this type. Is this a design flaw or problem that can result in an accident? The truck may have caught fire due to the overheating of the brakes, however it did not during this incident.*ak
NHTSA complaint #10117978
Jan 24, 2005service brakes, hydraulic
The consumer was driving 15 MPH coming out of a drive- thru and the brakes locked up. The consumer took the vehicle to the dealer on three separate occasions within the last 6,000 mi. The dealer was supposed to have fixed the problem. However, within the last 7 miles, all four brakes have locked up again. Provide further details. *jb
NHTSA complaint #10108753
Jan 14, 2005service brakes, hydraulic
2000 Dodge Dakota developed a brake problem.***no answer required***.*mr the brake would pulsate when braking and cause severe problems with the ABS which almost took the vehicle off of the road. The brakes were replaced a year prior. *sc
NHTSA complaint #10128008
Jan 11, 2005service brakes, hydraulic
I have a '2000 Dodge Dakota, quad cab 4x4 that has reoccuring break warpage problems. I drive about 12000 miles a year, mostly highway, and need to replace my rotors atleast every 18 months. Durring normal breaking durring wet or icy conditions there is excessive pulsing that leads to individual tires locking up and skidding and activation of the antilock breaking system. Ive… Read more
I have a '2000 Dodge Dakota, quad cab 4x4 that has reoccuring break warpage problems. I drive about 12000 miles a year, mostly highway, and need to replace my rotors atleast every 18 months. Durring normal breaking durring wet or icy conditions there is excessive pulsing that leads to individual tires locking up and skidding and activation of the antilock breaking system. Ive replaced the rotors with dealer puchased parts and equivilant aftermarket parts and both warp within 1-1.5 year.*ak
NHTSA complaint #10106103
Dec 10, 2004service brakes, hydraulic
Front brake rotors were replaced 3 times. Rotors warped between 10,000 to 20,000 miles. In the process of replacing them again only with high performance rotors, Dodge brake rotors are no good.*ak
NHTSA complaint #10102632
Dec 10, 2004service brakes, hydraulic
Two months ago consumer experienced suspension problems. The front end jerked, especially while making turns. He took vehicle to dealer to get it serviced, and mechanic determined that the problem was caused by the rotors. They needed to be shaved. *ak
NHTSA complaint #10103542
Nov 18, 2004service brakes, hydraulicCrash
Braking system on this vehicle is sub standard for stoping, on a emergency stop the brake pedal goes to the floor, but will not stop as it should. Was in an accident the other day, that could have been prevented it the brakes worked as they should, I have a (2002) darango and the braking sysem is like night a day virs the dakoda.*ak
NHTSA complaint #10100146
Nov 9, 2004service brakes, hydraulic
1-grabbing & squeaky brakes; 2-front rotors & disc pads; 3-replaced front rotors & disc pads. Dealership kept old parts. Ak
NHTSA complaint #10098569
Nov 14, 2003service brakes, hydraulic, air bagsCrash
While driving at 25 MPH consumer was following another vehicle, and upon stepping on the brakes consumer's vehicle did not slow down and collided with the other vehicle. Consumer was wearing seat belts, but the air bags did not deploy. When driving at any speed the brakes usually locked up, causing the vehicle to slide to the right through intersections. *ak
NHTSA complaint #10048011
Oct 8, 2003service brakes, hydraulicFire
Consumer complains about brake problems. The rotors warped at 10309 and 15,000 miles the consumer eventually replaced the brake system with an aftermarket system. On one occasion the front brakes started smoking. It was later determined that the caliper had stuck and overheated. Brakes lock up/ smoke, and have even caught on fire. No one seems able to repair them. … Read more
Consumer complains about brake problems. The rotors warped at 10309 and 15,000 miles the consumer eventually replaced the brake system with an aftermarket system. On one occasion the front brakes started smoking. It was later determined that the caliper had stuck and overheated. Brakes lock up/ smoke, and have even caught on fire. No one seems able to repair them. While driving and wanting to stop, cannot stop. This is a serious problem. Consumer has not been able to drive vehicle for a while. *ak *nlm
NHTSA complaint #10034214
Jul 17, 2003service brakes, hydraulicFire
While driving home from work I needed to slow down to make a turn. I pressed the brake and it went completely to the floor. Luckily I do not have an automatic because I had to power shift down and I barely made the turn not to mention almost hitting a telephone pole. I was just about home so I proceeded driving slowly because I knew I had no brakes ,and I then I saw smoke… Read more
While driving home from work I needed to slow down to make a turn. I pressed the brake and it went completely to the floor. Luckily I do not have an automatic because I had to power shift down and I barely made the turn not to mention almost hitting a telephone pole. I was just about home so I proceeded driving slowly because I knew I had no brakes ,and I then I saw smoke coming out of the hood. I quickly then got to the house and sprayed it down with the hose. I am in the process of figuring out what happened and the last that I heard was the main switch went out, which should have never happened. I am just thankful that nobody got hurt. (luckily it did not happen where there were people).*ak
NHTSA complaint #10028513
Jul 15, 2002service brakes, hydraulicCrash
While driving and with no warning brakes went out ,causing and accident. Cause unknown. Dealer notified. *ak
NHTSA complaint #8013873
Oct 18, 2001service brakes, hydraulicCrash
Brakes keep failing on this vehicle -lost control of vehicle slowing down for exit ramp. Left road and slid on grass to a stop. Do you need fatalities to make this an issue? With more then 50 documented complaints on file with NHTSA it wont be long now. *ak
NHTSA complaint #753403
Aug 31, 2001service brakes, hydraulicCrash
When slamming on brakes ABS braking system worked. However, when at a traffic stop and applied brakes, pedal went all the way to the floor. There were no holds, and he went though intersection. Dealership was aware of problem. *ak
NHTSA complaint #895638
Jul 24, 2001service brakes, hydraulicCrash
Brake rotor needed to be turned after only 30,000 due to shaking. Now 3,000 miles later shaking has returned. Manufacturer states that this is normal! No brake interlock-my 3 year old son was able to take the truck out of gear and the vehicle rolled back into a treed area damaging the truck. The lack of a brake interlock is an accident waiting to happen and needs to be… Read more
Brake rotor needed to be turned after only 30,000 due to shaking. Now 3,000 miles later shaking has returned. Manufacturer states that this is normal! No brake interlock-my 3 year old son was able to take the truck out of gear and the vehicle rolled back into a treed area damaging the truck. The lack of a brake interlock is an accident waiting to happen and needs to be addressed immediatley. When I contacted Dodge about my concerns I never received a response. *ak
NHTSA complaint #749072
Jul 4, 2001service brakes, hydraulicCrash1 injured
Same story as the other 100 people who have taken the time to go through this pain in the ass system to get some government action to protect us!! 5 visits to dealer to resurface and replace rotors...finally lost control due to "pulsing" brakes, luckily, not hurt bad. Gonna be a big lawsuit when someone is killed and the laywers see all these posts out here about the Dakota… Read more
Same story as the other 100 people who have taken the time to go through this pain in the ass system to get some government action to protect us!! 5 visits to dealer to resurface and replace rotors...finally lost control due to "pulsing" brakes, luckily, not hurt bad. Gonna be a big lawsuit when someone is killed and the laywers see all these posts out here about the Dakota terrible dangerous brakes! Pay up chrysler. NHTSA, do the right thing and force a recall before we get hurt!!*ak
NHTSA complaint #747843
Apr 11, 2001service brakes, hydraulicCrash1 injured
Rubber cover came off brake pedal while applying and causing driver's foot to slide onto accelerator pedal, which accelerated vehicle and caused a four car accident. Dealer / manufacturer were notified. *ak the rubber cover for the brake pedal was not glued and the manufacturer should be responsible for this accident. *yh
NHTSA complaint #885716
Mar 1, 2001service brakes, hydraulic1 injured
While driving around a slight curve the driver ran off the road with the two right wheels of the truck, when he got back on the road and slammed on the brakes and the left front wheel locked up amd steered him into a tree totaling the vehicle. Nlm
NHTSA complaint #560017
Dec 7, 2000service brakes, hydraulic, engine and engine cooling, power trainCrash
No summary listed for above vehicle. *ak
NHTSA complaint #737469
Oct 9, 2000service brakes, hydraulicCrash2 injured
We purchased the vehicle 2/26/00 and had no apparent problems.beginning in may it developed an intermittent brake pulsation.it progressed quickly to a very steady and violent shaking everytime we applied the brakes.on7/29/00 we were driving and saw traffic slowing ahead and began to slow as well,traffic then proceeded and we did as well.we were never closer than 8-10 car… Read more
We purchased the vehicle 2/26/00 and had no apparent problems.beginning in may it developed an intermittent brake pulsation.it progressed quickly to a very steady and violent shaking everytime we applied the brakes.on7/29/00 we were driving and saw traffic slowing ahead and began to slow as well,traffic then proceeded and we did as well.we were never closer than 8-10 car lengths.traffic again slowed suddenly,we applied our brakes, they shook violently,we heard a squeal from the tires,and the brakes released,we then rear-ended the vehicle in front of us..the dealer and all applicable parties were notified of the occurrence,the body shop did not notice anything obvious with the brake system.once the body work was completed it was towed to ron tonkin Dodge wher daimler/chrysler had arranged for an independent evaluation.they fond nothing in the computer and found nothing wrong with the brakes themselves(even the pulsation was gone).they released the vehicle to us.3-4 days later the truck resumed the pulsation the same way it did originally.we waited 10 days from the evaluation and took it to the dealer to have them test drive the vehicle to verify the problem.dave cordray the ABS tech test drove the truck with me and felt the pulsation and said" thats not right".john geraci the sevice manager asked if it was safe and dave said if its his name on the repair order he wouldnt let us drive it..we were given a rental car.3 days later they called back and said the vehicle was fine a
NHTSA complaint #733854