CarProblemsDB

2007 Dodge Caliber wheels problems

22 owners reported wheels problems — 2% of all 959 complaints about the 2007 Dodge Caliber.

Wheels complaints by Dodge Caliber year

20121
20115
20103
200911
200816
200722

What owners report

Oct 6, 2025power train, structure, wheels
I was informed on 09/29/2025 by my chrysler dealer that a second critical component of my 2007 Caliber frame had rusted to the point that it broke. The first critical component was reported in my complaint tracking number 11459461 submitted on 04/03/2022. The component in that filing was the engine pan that supported the engine. On this latest failure, I was told the same… Read more

I was informed on 09/29/2025 by my chrysler dealer that a second critical component of my 2007 Caliber frame had rusted to the point that it broke. The first critical component was reported in my complaint tracking number 11459461 submitted on 04/03/2022. The component in that filing was the engine pan that supported the engine. On this latest failure, I was told the same thing by the shop manager: "if you hit a bump while driving this vehicle you could lose your back wheels". In the first incident, the engine could have fallen out of my vehicle. He was not going to let me drive it home. Then he changed his mind and told me it was "at my discretion". I did drive it home (4.5 miles) with no problem. He told me he was going to try and find a new or used part to fix the issue. He made it clear that he was not hopeful of finding one. This is twice now that my life and the lives of any drivers on the road at the same time were placed in danger from excessive rusting problems. I submitted files in the first incident showing that chrysler was aware of the issue. A copy of the corporate service bulletin was attached. To my knowledge nothing was ever done. Is anything going to be done this time?

NHTSA complaint #11691736
Oct 14, 2024suspension, wheels, unknown or other

My car is at 69739 miles and the control arms and the front and rear subframe is rotted out

NHTSA complaint #11619600
Jun 9, 2022suspension, structure, wheels

Vehicle has less than 100,000 miles (strictly highway miles) and rear sub frame has completely rusted through causing back alignment to be drastically out, and fish tailing, which also causes hazardous steering control on dry and especially wet roads. Rapid wear and replacement of tires on rear end. I have researched and found this to be a consistent problem on multiple sites and forums.

NHTSA complaint #11468503
Dec 15, 2021suspension, wheelsFire
The contact owns a 2007 Dodge Caliber. The contact stated that while driving at an undisclosed speed, there was an abnormal sound coming from the rear passenger side. The contact looked in the rearview mirror and saw sparks coming from the rear passenger side. The contact pulled over, and upon inspection, the contact noticed that the rear passenger's side tire was inward and… Read more

The contact owns a 2007 Dodge Caliber. The contact stated that while driving at an undisclosed speed, there was an abnormal sound coming from the rear passenger side. The contact looked in the rearview mirror and saw sparks coming from the rear passenger side. The contact pulled over, and upon inspection, the contact noticed that the rear passenger's side tire was inward and the cross member was corroded. The vehicle was not diagnosed nor repaired by an independent mechanic or dealer. The manufacturer was not made aware of the failure. The contact related the failure to tsb number: 23-012-14 front and rear crossmember corrosion (x58 10 years unlimited mileage). The failure mileage was unavailable.

NHTSA complaint #11443924
Oct 19, 2020steering, suspension, wheels

In the midst of me driving across the intersection... My car began to shake uncontrollably... I had to get of the road because my wheel on the driver's side was disconnected from they entire car... Due to sever corrosion, yu under vehicle.. When I saw photos... I was terrifed!! My life was on jeopardy.. The first day I purchased this vehicle... I am sending photos to help support my claims..

NHTSA complaint #11365106
Sep 30, 2020steering, suspension, wheels
So , the car I purchased on aug.2nd, of this year... Has many issues! First of all about 2 weeks into having the vehicle... I needed exhaust work done... Shortly after that.. I began experiencing some pulling to the right when I touched the break pedal, now I'm experiencing some weird situation under the front of the car. Which in fact is causing the car to shake and now when… Read more

So , the car I purchased on aug.2nd, of this year... Has many issues! First of all about 2 weeks into having the vehicle... I needed exhaust work done... Shortly after that.. I began experiencing some pulling to the right when I touched the break pedal, now I'm experiencing some weird situation under the front of the car. Which in fact is causing the car to shake and now when I tap the break to stop the vehicle theirs a loud noise and when I give it gas.. It shreeks! It's very terrifying to say the least... I was unable to drive it back to my residence... I'm unable to drive this vehicle at all

NHTSA complaint #11362090
Mar 30, 2020suspension, wheels
Tl* the contact owns a 2007 Dodge Caliber. The contact stated that upon turning the steering wheel or driving over a bump, there was an abnormal noise coming from the driver side of the vehicle. Upon taking the vehicle for an oil change, an independent mechanic discovered that the crossmember bar on the front end of the vehicle was severely corroded. There were no warning… Read more

Tl* the contact owns a 2007 Dodge Caliber. The contact stated that upon turning the steering wheel or driving over a bump, there was an abnormal noise coming from the driver side of the vehicle. Upon taking the vehicle for an oil change, an independent mechanic discovered that the crossmember bar on the front end of the vehicle was severely corroded. There were no warning lights associated with the failure. The mechanic informed the contact that the corrosion was a known defect and to call the manufacturer for additional information. The contact called zeigler chrysler Dodge jeep ram of downers grove located at (2311 ogden ave, downers grove, il 60515), larry roesch chrysler jeep Dodge ram located at (200 w grand ave., elmhurst, il 60126), and dupage cdjr located at (433 e north ave., glendale heights, il 60139), where the contact was informed that the manufacturer provided an extended warranty on the vehicle however, the warranty period had expired. The manufacturer was also notified of the failure and provided the same information. The vehicle had not been repaired. The failure mileage was 160,133.

NHTSA complaint #11319708
Nov 15, 2016electrical system, structure, wheelsFire
Tl* the contact owns a 2007 Dodge Caliber. While driving 40 MPH, the subframe fractured on the vehicle. In addition, the contact replaced the tires on three occasions and the rear wheel bearings were replaced three times. Furthermore, the ignition switch caught fire. The contact extinguished the fire. The vehicle was towed and repaired by a dealer and an independent mechanic.… Read more

Tl* the contact owns a 2007 Dodge Caliber. While driving 40 MPH, the subframe fractured on the vehicle. In addition, the contact replaced the tires on three occasions and the rear wheel bearings were replaced three times. Furthermore, the ignition switch caught fire. The contact extinguished the fire. The vehicle was towed and repaired by a dealer and an independent mechanic. The manufacturer was not made aware of the issue. The failure mileage was 162,000.

NHTSA complaint #10926211
Jul 16, 2013air bags, structure, wheelsCrash

Fiance had a seizure and car went to side of road. Car flopped on the left driver side and crashed into trees. Air bags did not deploy, seat belts were intact and working. Previously, seat belts were found to unlatch at times when driver was in car and car was in motion. Amazed that seat belts worked because it saved our lives. Airbags did not deploy. *tr

NHTSA complaint #10525100
← All 2007 Dodge Caliber problems & recalls