CarProblemsDB

2007 Dodge Caliber body problems

170 owners reported body & structure problems — 18% of all 959 complaints about the 2007 Dodge Caliber.

Body & structure complaints by Dodge Caliber year

20126
201121
201010
200949
200889
2007170

What owners report

Oct 6, 2025power train, structure, wheels
I was informed on 09/29/2025 by my chrysler dealer that a second critical component of my 2007 Caliber frame had rusted to the point that it broke. The first critical component was reported in my complaint tracking number 11459461 submitted on 04/03/2022. The component in that filing was the engine pan that supported the engine. On this latest failure, I was told the same… Read more

I was informed on 09/29/2025 by my chrysler dealer that a second critical component of my 2007 Caliber frame had rusted to the point that it broke. The first critical component was reported in my complaint tracking number 11459461 submitted on 04/03/2022. The component in that filing was the engine pan that supported the engine. On this latest failure, I was told the same thing by the shop manager: "if you hit a bump while driving this vehicle you could lose your back wheels". In the first incident, the engine could have fallen out of my vehicle. He was not going to let me drive it home. Then he changed his mind and told me it was "at my discretion". I did drive it home (4.5 miles) with no problem. He told me he was going to try and find a new or used part to fix the issue. He made it clear that he was not hopeful of finding one. This is twice now that my life and the lives of any drivers on the road at the same time were placed in danger from excessive rusting problems. I submitted files in the first incident showing that chrysler was aware of the issue. A copy of the corporate service bulletin was attached. To my knowledge nothing was ever done. Is anything going to be done this time?

NHTSA complaint #11691736
Oct 12, 2024suspension, structure, engine
This is a follow up to complaint #11459461 filed on 4/3/22 at 9:16:43am. I was not able to send documents at that time. Documents included relate to follow up on complaint #11591104. First pdf file: pages 1-4 service bulletin from chrysler - my model year not included; pages 5-7 service invoice and picture of missing engine cradle pan; page 8 original repair invoice; … Read more

This is a follow up to complaint #11459461 filed on 4/3/22 at 9:16:43am. I was not able to send documents at that time. Documents included relate to follow up on complaint #11591104. First pdf file: pages 1-4 service bulletin from chrysler - my model year not included; pages 5-7 service invoice and picture of missing engine cradle pan; page 8 original repair invoice; page 9 copy of original repair invoice with notations for magna plant manager; page 10 notice of having received complaint; page 11 defective lug nut issue; page 12 complaint #11591104; page 13 service invoice noting replacement of two defective lug nuts. Second pdf file: pages 1-2 copy of original complaint #11459461; page 3 copy of towing receipt due to defective lug nut. Third pdf file: picture of three of four defective lug nut covers that I had to remove due to flat tires. First one not shown due to being damaged while attempting to remove beyond recognition. Upper left lug nut cover came off just in handling of removed lug nuts.

NHTSA complaint #11619474
Jun 20, 2024visibility, air bags, structure
The contact owns a 2007 Dodge Caliber. The contact stated that while it was raining, there was water entering through the sunroof and doors into the vehicle. The air bag warning light was illuminated. The contact called the local dealer, who stated that there were no related recalls for the failures. The vehicle was not diagnosed or repaired. The manufacturer was contacted and… Read more

The contact owns a 2007 Dodge Caliber. The contact stated that while it was raining, there was water entering through the sunroof and doors into the vehicle. The air bag warning light was illuminated. The contact called the local dealer, who stated that there were no related recalls for the failures. The vehicle was not diagnosed or repaired. The manufacturer was contacted and stated that there was no recall coverage for the failures and the contact was referred to the NHTSA hotline to report the failures. The failure mileage was approximately 70,000.

NHTSA complaint #11595439
Feb 27, 2024suspension, structure
The contact owns a 2007 Dodge Caliber. The contact stated while pulling into a parking space, there was an abnormal sound coming from the rear of the vehicle. The contact stated that upon inspecting the vehicle, he noticed that the subframe was severely rusted and there was a piece of metal hanging down in the rear of the vehicle. An independent mechanic inspected the vehicle… Read more

The contact owns a 2007 Dodge Caliber. The contact stated while pulling into a parking space, there was an abnormal sound coming from the rear of the vehicle. The contact stated that upon inspecting the vehicle, he noticed that the subframe was severely rusted and there was a piece of metal hanging down in the rear of the vehicle. An independent mechanic inspected the vehicle and determined that the subframe needed to be replaced. The mechanic informed the contact that the vehicle was undrivable. The vehicle was not repaired. The dealer was not notified of the failure. The manufacturer was notified of the failure, but no assistance was provided. The failure mileage was approximately 175,000. The VIN was not available.

NHTSA complaint #11574312
May 7, 2023structure, unknown or other
The window regulators of this car (& other vehicles of the same model) is a poor product of productivity. The cable wires that hold the window to guide the window up & down are known to & have become tangled up around the component that is said to properly wrap up the guided cable wires in the correct placement for the windows to continue to be able to roll up & down as… Read more

The window regulators of this car (& other vehicles of the same model) is a poor product of productivity. The cable wires that hold the window to guide the window up & down are known to & have become tangled up around the component that is said to properly wrap up the guided cable wires in the correct placement for the windows to continue to be able to roll up & down as intended. It's not just one door, it is literally every single door in this vehicle that has this issue. When I decided to try & save a little bit of money & get some used window regulators, I go to a salvage yard that had another Dodge Caliber (different model, how ever, same window regulators) just to find upon inspection, that every single door has a spoon in between the window & the rubber guard piece. Took the door panel off to further inspect & that vehicle had the same issue I have at this very moment... Cable wires completely tangled up and completely non salvageable. Removed the spoon & the window fell down. Now I understand that it doesn't sound like a safety issue but when you are driving down the highway, doing the speed limit, and your window falls down, it's very startling and honestly a distraction while driving. Not only is that a distraction but have you ever had a bird fly into your car, from the hole that was once a window? Talk about a distraction. It's like a bee flying into your helmet while riding a motorcycle or 4wheeler. Ah! Main focus is that flying object to come out, so you try

NHTSA complaint #11520801
Mar 24, 2023suspension, structure, unknown or other

Rear suspension rusted and broke during operation; control arm, tie rod and/or wheel bearings rusted and broke during operation causing vehicle to lose control

NHTSA complaint #11513652
Dec 3, 2022suspension, structure
Car has been garage kept entire time of owning. Sub frame still rotted out causing so much damage to the car, the struts, the tire(s); etc, causing car to shake and tire to bow out. Car has been at a repair shop for over 7 months now trying to get a replacement part to repair it with no luck as of yet. This should not be the responsibility of the customer. This has been a… Read more

Car has been garage kept entire time of owning. Sub frame still rotted out causing so much damage to the car, the struts, the tire(s); etc, causing car to shake and tire to bow out. Car has been at a repair shop for over 7 months now trying to get a replacement part to repair it with no luck as of yet. This should not be the responsibility of the customer. This has been a known issue for many of these vehicles for years now with nothings done or any warnings sent out regarding this issue being a possible hazard.

NHTSA complaint #11495890
Jun 9, 2022suspension, structure, wheels

Vehicle has less than 100,000 miles (strictly highway miles) and rear sub frame has completely rusted through causing back alignment to be drastically out, and fish tailing, which also causes hazardous steering control on dry and especially wet roads. Rapid wear and replacement of tires on rear end. I have researched and found this to be a consistent problem on multiple sites and forums.

NHTSA complaint #11468503
May 24, 2022structure, service brakes, visibility/wiperFire

Very bad design of muffler. It is very dangerous. The muffler has a hole on top. That heat effect the battom trunck, the hood get melted, heat sheild get burned and the road assistant tire get melted as well. I was lucky I was able to smell it. Also all body get very rusted and look hourrible.

NHTSA complaint #11465937
Apr 3, 2022structure
I had brought my 2003 stratus and 2007 Caliber in to the dealership for their 3000 mile oil change and check-up. When the stratus was done, I switched it out with the Caliber. The receptionist came into the waiting room to inform me that my vehicle was dangerous to drive. The engine cradle had rotted out. The manager had asked her to tell me: "if you hit a big bump, your… Read more

I had brought my 2003 stratus and 2007 Caliber in to the dealership for their 3000 mile oil change and check-up. When the stratus was done, I switched it out with the Caliber. The receptionist came into the waiting room to inform me that my vehicle was dangerous to drive. The engine cradle had rotted out. The manager had asked her to tell me: "if you hit a big bump, your engine could fall out." she showed me a picture of the area in question. I asked what I was supposed to be looking for and was shown where the cradle was supposed to be. A post-it note was on the picture saying that the manager "will do some pricing". The invoice states: "we question the structural integrity of it being able to hold up much longer." when I did not hear anything for a few weeks, I called in and was told that it had not been done but the manager would get right on it. I had asked the manager how this could have been missed during all the years I had been bringing it in for any kind of maintenance and was told: "it probably looks worse that what it should because I poked it with a screwdriver a few times to see how bad it was." invoice total: $1884.20. I have since spoken with a general manager for magna corporation who produced the cradle for the Caliber. They were aware of the design flaw of the cradle that did not allow for drainage of water/road chemicals from the cradle. A lawsuit was filed by magna against Dodge which magna won. The particulars of the lawsuit were not ma

NHTSA complaint #11459461
Dec 17, 2020suspension, structure
Tl* the contact's daughter owns a 2007 Dodge Caliber. The contact stated that upon his daughter taking the vehicle to an independent mechanic, she was informed that the engine cradle had began to rust underneath the subframe. Due to the failure, several holes were formed within the engine cradle. The contact then notified the manufacturer of the failure and was informed that… Read more

Tl* the contact's daughter owns a 2007 Dodge Caliber. The contact stated that upon his daughter taking the vehicle to an independent mechanic, she was informed that the engine cradle had began to rust underneath the subframe. Due to the failure, several holes were formed within the engine cradle. The contact then notified the manufacturer of the failure and was informed that the vehicle was never added to the manufacturer recall list for the failure. The manufacturer offered no further assistance. The dealer had yet to be notified of the failure. The vehicle had yet to be repaired. The failure mileage was approximately 100,000.

NHTSA complaint #11383891
Nov 10, 2020structureCrash

Front subframe failure due to premature corrosion caused loss of control of vehicle which could have LED to an accident involving serious injury or death a sit happened while turning left onto the highway and subsequently the failure cause damage to the front axle

NHTSA complaint #11374044
Oct 12, 2020structure

My front carriage that holds up the engine and tire alignment outside shell rusting out on the back side.

NHTSA complaint #11363859
Jul 22, 2020steering, suspension, structure

I I have changed multiple times the sway bar links and had to put on new struts twice. There was supposed to be a recall on the cross member bar and when I took it to be fixed the dealer would not honor the recall on the bar. It is now making once again a popping sound in the front drivers side and I am wanting to once again get the recall on the car that was supposed to be fixed before.

NHTSA complaint #11341003
Jun 26, 2020structure
The vehicles subframe was all rotted and drivers side tire practically fell off while it was being driven. Contacted Dodge and they said because there wasn't an open recall there was nothing they could do about it. My question is was there a recall on my particular vehicle if so when/where was it fixed. We bought this used and have no prior information on it. If this… Read more

The vehicles subframe was all rotted and drivers side tire practically fell off while it was being driven. Contacted Dodge and they said because there wasn't an open recall there was nothing they could do about it. My question is was there a recall on my particular vehicle if so when/where was it fixed. We bought this used and have no prior information on it. If this vehicle wasn't included on previous recalls it should have been and they should fix it now. *tr

NHTSA complaint #11331100
May 18, 2020suspension, structure
Tl* the contact owns a 2007 Dodge Caliber. The contact stated that while driving at approximately 55 MPH, there was an abnormal ticking noise. In addition, while exiting the highway the front axle fractured. The vehicle was towed to an independent mechanic where it was diagnosed that the frame and front of the vehicle was rusted. The vehicle was towed to midway Dodge (4747 s… Read more

Tl* the contact owns a 2007 Dodge Caliber. The contact stated that while driving at approximately 55 MPH, there was an abnormal ticking noise. In addition, while exiting the highway the front axle fractured. The vehicle was towed to an independent mechanic where it was diagnosed that the frame and front of the vehicle was rusted. The vehicle was towed to midway Dodge (4747 s pulaski rd, chicago, il 60632, (773) 376-8060) where the diagnosis was confirmed. The vehicle was not repaired. The manufacturer was not notified of the failure. The approximate failure mileage was 150,000.

NHTSA complaint #11324933
Mar 22, 2020suspension, structure

Common subframe corrosion on low mileage 2007 vehicles causing extreme safety issues while driving. Was warned by auto shop that this is common and renders safety issues to driver as entire engine could drop when driving or wheel separation, that could cause severe injury or death. No recall or warranty issued to me. This should be a safety recall as common as it is.

NHTSA complaint #11318967
Feb 23, 2020steering, suspension, structure
Have a 2007 Dodge Caliber with 90k miles. My wife recently went to get it inspected and come to find out the front and rear crossmembers and subframe components were terribly corroded. Needless to say it was not passed. It's started shaking while driving, alignment is off according to tire wear. I've read tons of complaints and see they issues not a recall but a 10 year… Read more

Have a 2007 Dodge Caliber with 90k miles. My wife recently went to get it inspected and come to find out the front and rear crossmembers and subframe components were terribly corroded. Needless to say it was not passed. It's started shaking while driving, alignment is off according to tire wear. I've read tons of complaints and see they issues not a recall but a 10 year extended warranty on this issue. Curious as to when this was issued and if my car falls into that

NHTSA complaint #11310886
Feb 3, 2020structure

Started hearing a loud banging noise whenever I would hit a bump or turn left coming from drivers side tire. After getting home, I checked and the entire subframe is rusted out.

NHTSA complaint #11306635
Jan 17, 2020structure
Tl* the contact owns a 2007 Dodge Caliber. The contact stated that the vehicle showed major corrosion to the undercarriage. The contact stated that while her dad was driving there was a vibration with the vehicle and the rear wheel felt as if was about to detached. The driver noticed underneath the vehicle both cross member were corroded with holes. The vehicle was not taken… Read more

Tl* the contact owns a 2007 Dodge Caliber. The contact stated that the vehicle showed major corrosion to the undercarriage. The contact stated that while her dad was driving there was a vibration with the vehicle and the rear wheel felt as if was about to detached. The driver noticed underneath the vehicle both cross member were corroded with holes. The vehicle was not taken to a dealer or an independent mechanic and was not repaired. The manufacturer was made aware of the failure and informed the contact that the VIN was not part of a recall. No assistance was provided. The failure mileage was approximately 104,000. The consumer submitted photos of the vehicle. *tr

NHTSA complaint #11300064
Nov 3, 2019suspension, structure, unknown or other

I washed my car for the first time and that is when I noticed my cars frame is rusted out. There is a big hole in the middle of my frame that is near the motor. I have to drive it and it sounds like it's going to break in half. It is worst when I hit a bump in the road, like speed bumps. My car has 106k miles the body has little to no rust. I've owned it only a few months.

NHTSA complaint #11277824
Oct 30, 2019structure
While in for routine annual inspecton was informed by mechanic that front subframe on vehicle was rusted to the point that it would not pass inspection. Was informed that this was a common problem with these and other chrysler vehicles. Was also told that the problem was common enough that chrysler had extended the warranty for this repair. Contacted local dealership and… Read more

While in for routine annual inspecton was informed by mechanic that front subframe on vehicle was rusted to the point that it would not pass inspection. Was informed that this was a common problem with these and other chrysler vehicles. Was also told that the problem was common enough that chrysler had extended the warranty for this repair. Contacted local dealership and was told warranty had expired and would not be honored, even though safety was a factor. Given that this is a common problem it should be corrected with a recall.

NHTSA complaint #11277129
Oct 28, 2019structure

While getting maintenence done on my car, I was informed by my independent mechanic that my front and rear sub frames have rusted through and the car is no longer safe to drive. This is an existing issue with this make and model and a recall needs to be issued for the many Caliber owners experiencing this same issue. Dealerships will not honor the former warranty although safety is at stake.

NHTSA complaint #11271548
Oct 21, 2019structure
Tl* the contact owns a 2007 Dodge Caliber. While driving at low speeds, the contact heard knocking and clunking noises from underneath the vehicle when driving over bumps in the road. The contact took the vehicle to tate chrysler jeep Dodge frederick (5629 buckeystown pike, frederick, md 21704, (301) 663-6126) where it was diagnosed that the inner and outer tie rods needed to… Read more

Tl* the contact owns a 2007 Dodge Caliber. While driving at low speeds, the contact heard knocking and clunking noises from underneath the vehicle when driving over bumps in the road. The contact took the vehicle to tate chrysler jeep Dodge frederick (5629 buckeystown pike, frederick, md 21704, (301) 663-6126) where it was diagnosed that the inner and outer tie rods needed to be replaced. The vehicle was repaired, but the failure continued. The manufacturer was not notified. The vehicle was not repaired. The failure mileage was approximately 170,000.

NHTSA complaint #11269961
Oct 4, 2019structure
Tl* the contact owns a 2007 Dodge Caliber. While driving approximately 30-45 MPH over a bump in the road, the contact heard an abnormal screeching sound coming from the front of the vehicle. The contact stopped to inspect the vehicle, but there was no physical damage present. The contact was able to safely drive the vehicle to a sibling's home where it was noticed that the… Read more

Tl* the contact owns a 2007 Dodge Caliber. While driving approximately 30-45 MPH over a bump in the road, the contact heard an abnormal screeching sound coming from the front of the vehicle. The contact stopped to inspect the vehicle, but there was no physical damage present. The contact was able to safely drive the vehicle to a sibling's home where it was noticed that the engine cradle was severely rusted. The failure caused the front wheels to almost separate from the subframe of the vehicle. Sawyer motors (166 ulster ave, saugerties, ny 12477, (845) 247-5027) was contacted and stated that the vehicle was out of warranty. No assistance would be offered. The manufacturer was informed of the failure and provided case number: 64699050. The vehicle was not repaired. The approximate failure mileage was 88,000. *tr *bf the consumer provided photos of the defect. *tr

NHTSA complaint #11266167
Aug 7, 2019suspension, structure
Tl* the contact owns a 2007 Dodge Caliber. While reversing out of the parking lot, the contact noticed an abnormal noise under the vehicle. The contact immediately took the vehicle to an independent mechanic where it was diagnosed that the subframe had a lot of corrosion and needed to be replaced. The vehicle was not repaired. The dealer (terry henricks chrysler Dodge jeep… Read more

Tl* the contact owns a 2007 Dodge Caliber. While reversing out of the parking lot, the contact noticed an abnormal noise under the vehicle. The contact immediately took the vehicle to an independent mechanic where it was diagnosed that the subframe had a lot of corrosion and needed to be replaced. The vehicle was not repaired. The dealer (terry henricks chrysler Dodge jeep ram, 1935 s defiance st, archbold, oh 43502, (419) 445-2576) was contacted and stated that the VIN was not included in a recall. The contact mentioned that the ball joints were replaced five times by an independent mechanic at 30,000 miles. The manufacturer was not made aware of the failures. The failure mileage was approximately 100,011.

NHTSA complaint #11242211
Jul 25, 2019structure, engine
Tl* the contact owns a 2007 Dodge Caliber. The contact stated that during a routine check-up, it was noticed that the rear subframe of the vehicle was rusted from the inside out. The contact also stated that the engine made a lot of noise. The contact called shottenkirk chrysler jeep Dodge at 888-344-9954 (located at 2301 e washington st, mount pleasant, ia 52641) and was… Read more

Tl* the contact owns a 2007 Dodge Caliber. The contact stated that during a routine check-up, it was noticed that the rear subframe of the vehicle was rusted from the inside out. The contact also stated that the engine made a lot of noise. The contact called shottenkirk chrysler jeep Dodge at 888-344-9954 (located at 2301 e washington st, mount pleasant, ia 52641) and was referred to the manufacturer. The manufacturer was made aware of the failures and stated that there was no recall. The vehicle was not diagnosed or repaired. The failure mileage was approximately 177,000.

NHTSA complaint #11234810
Jul 9, 2019structure
While driving my son heard an abnormal noise (squeaking and clunking) was coming from under the car by the driver side wheel. Upon investigating when we grabbed the stabilizer arm on the right side it had significant movement. We grabbed the left side for comparison and it did not move. We followed the stabilizer bar and found that the point where the bushing attaches to… Read more

While driving my son heard an abnormal noise (squeaking and clunking) was coming from under the car by the driver side wheel. Upon investigating when we grabbed the stabilizer arm on the right side it had significant movement. We grabbed the left side for comparison and it did not move. We followed the stabilizer bar and found that the point where the bushing attaches to the subframe had cracked off. While looking at the subframe closer it has significant corrosion/rust (a lot more than a vehicle with 120k miles should have). We contacted chrysler and they were willing to "warranty" (even though it is outside the warranty period) the front and back subframe however they would not cover any parts that attached to the subframe. We were told that if any bolts/parts that broke were our responsibility which could cost up to $2000 which is half the value of the car. So with chrysler covering the subframe pieces and labor (estimated $1000) technically the vehicle is totaled (combined total repair costs $3000 on a car worth $4000)....and now an 18 year old kid no longer has a car. The rest of the car is in great shape and should have easily gone another 80k miles at a minimum. Such a shame to scrap/part out a vehicle at 120k miles for a manufacturing/quality deficiency.

NHTSA complaint #11230468
Jun 13, 2019structure

Tl* the contact owns a 2007 Dodge Caliber. While the contact was changing the oil, he noticed that the front subframe was rusted. The contact called griffin's hub chrysler jeep Dodge ram (located at 5700 s 27th st, milwaukee, wi 53221, (414) 325-3333), but the vehicle was not diagnosed or repaired. The manufacturer was notified. The failure mileage was 157,000.

NHTSA complaint #11219874
May 31, 2019suspension, structure, unknown or other
My 2007 Dodge Caliber's subframe is severely rusted and there's less then 80,000 miles on the car. A car that new should not rust so bad in such a short amount of time. The warranty on the car should be a recall because the subframe is so rusted that it's dangerous and too unsafe to drive anywhere. In addition to the car being a safety hazard, the subframe is very expensive to… Read more

My 2007 Dodge Caliber's subframe is severely rusted and there's less then 80,000 miles on the car. A car that new should not rust so bad in such a short amount of time. The warranty on the car should be a recall because the subframe is so rusted that it's dangerous and too unsafe to drive anywhere. In addition to the car being a safety hazard, the subframe is very expensive to fix thanks to the amount of time it takes to remove the subframe. With the subframe gone bad, the rusted out subframe also damages attached parts of the car. The struts in the rear and front have gone bad due to the subframe's erosion.

NHTSA complaint #11217164
May 10, 2019structure, engine

Tl* the contact owns a 2007 Dodge Caliber. The contact stated that during routine maintenance, it was informed by the independent mechanic that the sub frame had corroded and it was unsafe to drive the vehicle. The engine warning light had illuminated. The vehicle was not repaired. A dealer was not contacted. The manufacturer was made aware of the failure. The failure mileage was 125,978.

NHTSA complaint #11206811
Apr 23, 2019structure

My husband was driving home from work and the k member just broke as he approached an intersection. It is now on a trailer unable to be driven.

NHTSA complaint #11203275
Apr 2, 2019structure

The car is in motion. The cv axle pulled out because of the rusted sub frame. The car has 137,000 miles on it and the rest of the car is not rusty. This is a safety issue and my girlfriend could've been hurt. She has kids that could've been hurt if they were in the car. This should be a recall issue. Reimbursement or a portion of my $1300 would be greatly appreciated back.

NHTSA complaint #11193437
Apr 1, 2019structure
Front subframe is rusted so badly the bolts are barely attached to the steering column, so car is unsafe to drive. Mileage: 126,000. Dodge customer service claims they extended the warranty through 2016 to fix this, but I did not receive notice as I had bought it used in 2014 from a non-Dodge dealership. Independent mechanic is quoting $1200 to repair, including $700 for the… Read more

Front subframe is rusted so badly the bolts are barely attached to the steering column, so car is unsafe to drive. Mileage: 126,000. Dodge customer service claims they extended the warranty through 2016 to fix this, but I did not receive notice as I had bought it used in 2014 from a non-Dodge dealership. Independent mechanic is quoting $1200 to repair, including $700 for the subframe itself from chrysler. This appears to be a known issue from many other Dodge Caliber owners, so there should be a safety recall.

NHTSA complaint #11193169
Jan 15, 2019structure
Tl* the contact owns a 2007 Dodge Caliber. While the vehicle was undergoing routine maintenance, the contact was informed that there was excessive rust on the rear subframe. The maintenance work could not be safely completed due to the rust. Jim shorkey chrysler Dodge jeep ram fiat (located at 13230 us-30, irwin, pa 15642, (412) 872-2400) was notified of the failure. The… Read more

Tl* the contact owns a 2007 Dodge Caliber. While the vehicle was undergoing routine maintenance, the contact was informed that there was excessive rust on the rear subframe. The maintenance work could not be safely completed due to the rust. Jim shorkey chrysler Dodge jeep ram fiat (located at 13230 us-30, irwin, pa 15642, (412) 872-2400) was notified of the failure. The manufacturer was also notified of the failure. The approximate failure mileage was 279,000.

NHTSA complaint #11170098
Jan 14, 2019structure
Tl* the contact owns a 2007 Dodge Caliber. While the vehicle was being repaired per an unspecified failure by an independent mechanic, the contact was informed that the undercarriage was rusted and could not be repaired. The dealer was not contacted. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was 180,000. *tt consumer… Read more

Tl* the contact owns a 2007 Dodge Caliber. While the vehicle was being repaired per an unspecified failure by an independent mechanic, the contact was informed that the undercarriage was rusted and could not be repaired. The dealer was not contacted. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was 180,000. *tt consumer stated spoke with corporate about undercarriage ( about 4 months past extended warranty expiration) approved repair. Took it to the repair shop but the shop did not have any notes from corporate. On 12/18 driverside ball - joint rusted and snapped, had towed to dealership. Contacted corporate 4 times but no response. Consumer also has issues with both front door hinges rusted out, back doors are starting too, they're difficult to close at half way shut. *jb

NHTSA complaint #11169955
Dec 18, 2018suspension, structure
Vehicle front sub frame rusted through with holes and excessive rusted components in rear suspension components. Cause. Excessive corrosion due to normal exposure to environment and normal driving conditions. My vehicle was excluded from a recall. The vehicle was built with the same parts as the vehicles that got covered by the existing recall. And has identical corrosion… Read more

Vehicle front sub frame rusted through with holes and excessive rusted components in rear suspension components. Cause. Excessive corrosion due to normal exposure to environment and normal driving conditions. My vehicle was excluded from a recall. The vehicle was built with the same parts as the vehicles that got covered by the existing recall. And has identical corrosion failures as the vehicles included in the recall. I have already replaced engine oil pan that rusted and was leaking. Transmission oil pan replaced. Rusted and was leaking.

NHTSA complaint #11162317
Nov 14, 2018steering, suspension, structure
Tl* the contact owns a 2007 Dodge Caliber. While operating the vehicle, the front suspension and steering wheel suddenly shook and vibrated. In addition, the steering column made a popping noise. The vehicle was taken to an independent mechanic who diagnosed that the front section of the subframe experienced severe rust and corrosion. The vehicle was not repaired. The… Read more

Tl* the contact owns a 2007 Dodge Caliber. While operating the vehicle, the front suspension and steering wheel suddenly shook and vibrated. In addition, the steering column made a popping noise. The vehicle was taken to an independent mechanic who diagnosed that the front section of the subframe experienced severe rust and corrosion. The vehicle was not repaired. The manufacturer was notified and did not assist. The failure mileage was 98,000.

NHTSA complaint #11151405
Sep 10, 2018structure

Tl* the contact owns a 2007 Dodge Caliber. While having the front wheel aligned at an independent mechanic, the contact was informed that the front cross members were severely rusted and needed to be replaced. The vehicle was not repaired. Neither the dealer nor the manufacturer was notified of the failure. The approximate failure mileage was 130,000.

NHTSA complaint #11128416
Sep 5, 2018steering, suspension, structure

Front and rear cross members as per x58 and revision x59 rusted notice sent july 14th 2014 to have inspected for rust dealership inspected and found no rust reinspected august 23 2018 rust found dealership stated out of extended warranty x58 no goodwill assistance available cause of extended warranty expiration.

NHTSA complaint #11124605
← All 2007 Dodge Caliber problems & recalls