CarProblemsDB

2001 Chrysler PT Cruiser transmission problems

47 owners reported transmission & powertrain problems — 8% of all 618 complaints about the 2001 Chrysler PT Cruiser.

Transmission & powertrain complaints by Chrysler PT Cruiser year

20097
200810
200717
200628
200513
200421
200335
200235
200147

What owners report

Jun 1, 2015power train, electrical system, engineFire
Was driving vehicle going 55 MPH and dashboard faults out with incoherent readings and transaxle shifts self into neutral. I shift gear selector into neutral and back into drive. Dashboard readings go back to normal and transaxle goes back into drive. 15 seconds later battery light comes on. Continue driving to find a place to park. After about 10 seconds engine stalls out.… Read more

Was driving vehicle going 55 MPH and dashboard faults out with incoherent readings and transaxle shifts self into neutral. I shift gear selector into neutral and back into drive. Dashboard readings go back to normal and transaxle goes back into drive. 15 seconds later battery light comes on. Continue driving to find a place to park. After about 10 seconds engine stalls out. Shift gear selector into neutral and try to restart vehicle but it won't start. Coast to a stop and open hood. Notice an odd smell. Open hood and alternator is on fire. Close hood and grab personal belongings (except for phone charger) out of vehicle. Call 911 as vehicle burns up. Fire and police arrive and extinguish fire but vehicle badly destroyed by being engulfed in flames.

NHTSA complaint #10722604
Aug 5, 2014power train, engine
I have had many problems with this car to include electrical, over heating (which was never fixed even after taking it to the dealership 3 times), and transmission. In 2013 as I was driving down a busy 4 lane hwy. I heard a sudden and loud booming noise and the car began shaking violently. Thinking that I had hit something in the road I began slowing down and making my way to… Read more

I have had many problems with this car to include electrical, over heating (which was never fixed even after taking it to the dealership 3 times), and transmission. In 2013 as I was driving down a busy 4 lane hwy. I heard a sudden and loud booming noise and the car began shaking violently. Thinking that I had hit something in the road I began slowing down and making my way to the shoulder of the hwy. But before I could get to the shoulder of the hwy. The car made that loud booming noise a second time and shook violently again. It then lost all power to the front wheels leaving me stranded in the middle of the hwy. After removing and opening up the transmission I found that the drive shaft in the center of the transmission had sheared in half. Upon further inspection I believe that the slightly worn engine mounts cause a binding action on the drive shaft in the transmission thus causing the shaft which is made of a composite material to basically explode inside the transmission. This problem is so well known by us car buffs that jasper engines inc. (a well known company that remanufactures engines and transmissions) replaces this stock shaft with a stronger more robust one when they remanufacture these transmissions. The violent shaking of the car that happened when this transmission shaft failed almost cause me to loose control of the vehicle on a very busy hwy. Chrysler should recall all transmissions with this type of composite shaft. *tr

NHTSA complaint #10618885
Apr 16, 2014power train

Pulled into work shut car off noted leakage part on ground was told pressure switch. *tt

NHTSA complaint #10583049
Oct 19, 2013suspension, power train, structure
Upon inspection during a repair for another problem it was discovered that the front suspension crossmember known as the k-frame is severely corroded and will likely not pass another safety inspection. The rest of the underneath of this car is relatively rust-free and this is a low mileage vehicle for its age. If this part fails going down the highway the engine,… Read more

Upon inspection during a repair for another problem it was discovered that the front suspension crossmember known as the k-frame is severely corroded and will likely not pass another safety inspection. The rest of the underneath of this car is relatively rust-free and this is a low mileage vehicle for its age. If this part fails going down the highway the engine, transmission, etc. Will all drop and cause the vehicle to lose control. *tr

NHTSA complaint #10548509
Nov 29, 2010power train
I have a 2001 PT Cruiser. I noticed in your NHTSA id #10010478 you state that the front hub/half shaft click/pop sound. My car starting making such a sound immediately before all of the wheel studs where sheared off and the front right wheel separated from the automobile while going 60 miles an hour. I have all five studs that have been removed that can be inspected. I… Read more

I have a 2001 PT Cruiser. I noticed in your NHTSA id #10010478 you state that the front hub/half shaft click/pop sound. My car starting making such a sound immediately before all of the wheel studs where sheared off and the front right wheel separated from the automobile while going 60 miles an hour. I have all five studs that have been removed that can be inspected. I also have one of the lug nuts with part of the stud. The studs where sheared off even with the face of the rotor. There was no warning that there was a major problem with the vehicle before the wheel separated from the vehicle. *tr

NHTSA complaint #10368187
Jun 1, 2009power train, seats
Tl*the contact owns a 2001 Chrysler PT Cruiser. When attempting to shift gears, the gear shifter became loose and temporarily inoperative. The contact took the vehicle to a transmission expert and a technician stated that the gear box bushings and thrust washers were missing. He took the vehicle to a dealer and they replaced the clutch cables at the cost of $300. In… Read more

Tl*the contact owns a 2001 Chrysler PT Cruiser. When attempting to shift gears, the gear shifter became loose and temporarily inoperative. The contact took the vehicle to a transmission expert and a technician stated that the gear box bushings and thrust washers were missing. He took the vehicle to a dealer and they replaced the clutch cables at the cost of $300. In addition, the seat cables to the rear passenger seat failed. He called the manufacturer and left a message. The failure and current mileages were 28,000.

NHTSA complaint #10272537
Nov 1, 2008power train
During routine oil change the mechanic found that the threads welded into the oil pan had come loose. Car needed a new oil pan. I was told that this is a "fairly common problem" because the pan is aluminum and the threaded piece is steel and since the two metals have different expansion and contraction temperatures that over time the weld is broken and the thread "breaks… Read more

During routine oil change the mechanic found that the threads welded into the oil pan had come loose. Car needed a new oil pan. I was told that this is a "fairly common problem" because the pan is aluminum and the threaded piece is steel and since the two metals have different expansion and contraction temperatures that over time the weld is broken and the thread "breaks loose" from the pan. Seems to me this should be a recall as it is a poor design. *tr

NHTSA complaint #10247412
Sep 24, 2008engine and engine cooling, fuel system, gasoline, power train, electrical system
Tl*the contact owns a 2001 Chrysler PT Cruiser. The contact received a recall notice pertaining to the fuel system. After the recall repairs were performed, the instrument panel failed. The engine and all the electrical components shut off while idle as well as driving various speeds. While driving less than 70 MPH, the failure recurred and caused an 18-wheel vehicle to… Read more

Tl*the contact owns a 2001 Chrysler PT Cruiser. The contact received a recall notice pertaining to the fuel system. After the recall repairs were performed, the instrument panel failed. The engine and all the electrical components shut off while idle as well as driving various speeds. While driving less than 70 MPH, the failure recurred and caused an 18-wheel vehicle to swerve over the median to avoid crashing into her vehicle. The dealer reprogrammed the transmission controller module. On july 10, 2007, the vehicle was taken back to the dealer for the same failures. The etax relay and the controller software was updated. The vehicle was taken back to the dealer on august 30, 2007. The flash controller was replaced and the air bag sensor was reprogrammed; however, the repairs did not remedy the failures. On december 28, 2007, the vehicle was taken to the dealer due to transmission hesitation. The modular engine controller was reprogrammed. The failure mileage was 51,780 and current mileage was less than 62,000. Updated 10/16/08 *bf

NHTSA complaint #10243324
Sep 24, 2008engine and engine cooling, fuel system, gasoline, power train, electrical system
Tl*the contact owns a 2001 Chrysler PT Cruiser. The contact received a recall notice pertaining to the fuel system. After the recall repairs were performed, the instrument panel failed. The engine and all the electrical components shut off while idle as well as driving various speeds. While driving less than 70 MPH, the failure recurred and caused an 18-wheel vehicle to… Read more

Tl*the contact owns a 2001 Chrysler PT Cruiser. The contact received a recall notice pertaining to the fuel system. After the recall repairs were performed, the instrument panel failed. The engine and all the electrical components shut off while idle as well as driving various speeds. While driving less than 70 MPH, the failure recurred and caused an 18-wheel vehicle to swerve over the median to avoid crashing into her vehicle. The dealer reprogrammed the transmission controller module. On july 10, 2007, the vehicle was taken back to the dealer for the same failures. The etax relay and the controller software was updated. The vehicle was taken back to the dealer on august 30, 2007. The flash controller was replaced and the air bag sensor was reprogrammed; however, the repairs did not remedy the failures. On december 28, 2007, the vehicle was taken to the dealer due to transmission hesitation. The modular engine controller was reprogrammed. The failure mileage was 51,780 and current mileage was less than 62,000. Updated 10/16/08. *lj updated 10/17/08. *jb

NHTSA complaint #10243317
Jul 30, 2008steering, service brakes, hydraulic, engine and engine cooling, power train, electrical system, vehicle speed control
Tl*the contact owns a 2001 Chrysler PT Cruiser. The contact purchased the vehicle in november of 2007 and the wiring harness was replaced due to electrical failures. In april of 2008, while driving approximately 35 MPH, the vehicle accelerated on its own. The vehicle was towed to the dealer and they replaced the brake pads and calipers. Recently, the engine light… Read more

Tl*the contact owns a 2001 Chrysler PT Cruiser. The contact purchased the vehicle in november of 2007 and the wiring harness was replaced due to electrical failures. In april of 2008, while driving approximately 35 MPH, the vehicle accelerated on its own. The vehicle was towed to the dealer and they replaced the brake pads and calipers. Recently, the engine light illuminated on the instrument panel. The dealer's diagnostic indicated that the transmission solenoid switch needed to be replaced, along with the power steering pump. The dealer stated that the warranty does not cover the parts. The manufacturer stated that there were no recalls that applied to her VIN. The failure mileage was 68,000 and current mileage was 75,551.

NHTSA complaint #10236394
Aug 17, 2005power trainCrash
Dt: 2001 Chrysler PT Cruiser. The consumer states her 6 year old daughter went to get something out of the vehicle and knocked it out of gear. The vehicle then rolled into the street. The underside of the vehicle was pushed in. The vehicle ran into a house. Upon impact, the air bags did not deploy. The vehicle was going about 30 MPH when this happened. The consumer… Read more

Dt: 2001 Chrysler PT Cruiser. The consumer states her 6 year old daughter went to get something out of the vehicle and knocked it out of gear. The vehicle then rolled into the street. The underside of the vehicle was pushed in. The vehicle ran into a house. Upon impact, the air bags did not deploy. The vehicle was going about 30 MPH when this happened. The consumer lived on a hill, and while it was rolling , the child put it back in park. The vehicle continued to roll. There were no keys in the ignition when this occurred. There I a police report was taken, case #05-029614, deputy boeltz with yazapi county police department.*ak

NHTSA complaint #10133219
Jan 14, 2004power trainCrash

Consumer's vehicle was parked in the 1st gear and turned off, it rolled, and crashed into another vehicle. *ak

NHTSA complaint #10054030
Aug 20, 2002power trainCrash1 injured

While driving on turnpike power control module failed, causing vehicle to stall. Consumer coasted into right lane, and another vehicle collided into the rear. Consumer sustained injuries.*ak

NHTSA complaint #8016813
Aug 19, 2002engine and engine cooling, power trainCrash1 injured

Engine died without any warning - power control module failed killing engine - on major hwy without a shoulder - put on flashers but still rear ended by another driver after fully stopped who was passing on right.*ak

NHTSA complaint #765883
Jun 7, 2000power trainCrash

While parked vehicle slipped out of gear and rolled down driveway into a mail box. Dealer / manufacturer notified. *ak *ml

NHTSA complaint #863150
← All 2001 Chrysler PT Cruiser problems & recalls