CarProblemsDB

2017 Chrysler Pacifica fuel problems

80 owners reported fuel & propulsion system problems — 5% of all 1,548 complaints about the 2017 Chrysler Pacifica.

Fuel & propulsion system complaints by Chrysler Pacifica year

20261
20253
20244
202317
202229
202183
202013
201912
201850
201780
20161
200810
200750
200693
2005121
200493

What owners report

Oct 1, 2026fuel/propulsion system
Under safety recall 73b, for which I had the software update done last year (nothing noted by the dealer). I have since had intermittent check engine light issues, and even had the vehicle completely shut off last winter for 10 minutes in the middle of the road. It subsequently turned on, and when brought in I was told there were no "current codes" in the system to… Read more

Under safety recall 73b, for which I had the software update done last year (nothing noted by the dealer). I have since had intermittent check engine light issues, and even had the vehicle completely shut off last winter for 10 minutes in the middle of the road. It subsequently turned on, and when brought in I was told there were no "current codes" in the system to investigate. I've now had check engine light on steady for a couple months. There are historical codes u029a-00 (lost communication with hybrid battery pack sensor module), u0412-00 (invalid data received from battery energy control module a), and current code p1d43-00 (internal control module shut off test monitoring time error). With these relating to the battery pack control module ("bpcm") and hybrid control processor, it is quite apparent that there is an issue with the bpcm and that the lack of communication and errors on the shut off test monitoring that the bpcm is malfunctioning which could cause a number of issues, such as a fire per safety recall 73b. I was told by the manufacturer that there is a 2-year period to remedy safety recall work. As this was a software update, it would appear that the software is now identifying a potential danger with the bpcm. Per that recall "...a folded or torn anode tab may result in the generation of lithium by-product over time. This defect, along with a second unidentified factor, may lead to an internal short within the pack and may result in a vehicle fire.

NHTSA complaint #11768339
Oct 1, 2026fuel/propulsion system
On 8/16/26, my 2017 Chrysler Pacifica hybrid would not start after being parked for several hours in an underground parking structure in downtown detroit during a baseball game. There were no warnings before the failure. The vehicle was towed to serra lake orion at a cost of about $700. The dealer found diagnostic trouble code p0aa1 (hybrid/ev battery positive contactor… Read more

On 8/16/26, my 2017 Chrysler Pacifica hybrid would not start after being parked for several hours in an underground parking structure in downtown detroit during a baseball game. There were no warnings before the failure. The vehicle was towed to serra lake orion at a cost of about $700. The dealer found diagnostic trouble code p0aa1 (hybrid/ev battery positive contactor circuit). The high-voltage system is locked down and the vehicle cannot be started or driven. The vehicle has been at the dealer since august 18, 2026, and as of 10/1/26 has been out of service for about 6 weeks. The dealer has an open Chrysler star technical support case (102974656) seeking approval to replace the high-voltage battery, and the process has involved repeated requests for additional testing. I have been given loaner vehicles during this time but am approaching the mileage limit on the second. The vehicle has about 220,000 miles and I have owned it since august 2017. It has no open recalls. It previously received recall repair work on the hybrid system, including the power inverter module recall (Chrysler t34 / NHTSA 17v-371), which included reprogramming of the battery pack control module. I understand this model has also been subject to other high-voltage battery recalls. I am reporting this because a high-voltage contactor failure that leaves the vehicle unable to start or move can strand occupants, in this case in an underground parking structure, and because the repair has been delayed fo

NHTSA complaint #11768274
Jul 16, 2026hybrid propulsion system
The contact owns a 2017 Chrysler Pacifica. The contact received notification of nthsa campaign number: 24v536000 (hybrid propulsion system); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the dealer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the… Read more

The contact owns a 2017 Chrysler Pacifica. The contact received notification of nthsa campaign number: 24v536000 (hybrid propulsion system); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the dealer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.

NHTSA complaint #11750924
Jul 13, 2026power train, electrical system, fuel/propulsion system
While driving at highway speed, my 2017 Chrysler Pacifica phev suddenly entered limp mode, displaying a red turtle warning light and red battery icon, and lost propulsion. My family was forced to pull onto the shoulder of a busy expressway, creating an immediate safety risk to occupants and other drivers. The vehicle was towed to an authorized Chrysler dealership where it has… Read more

While driving at highway speed, my 2017 Chrysler Pacifica phev suddenly entered limp mode, displaying a red turtle warning light and red battery icon, and lost propulsion. My family was forced to pull onto the shoulder of a busy expressway, creating an immediate safety risk to occupants and other drivers. The vehicle was towed to an authorized Chrysler dealership where it has remained for nearly four weeks. A witech scan confirmed the battery pack control module is showing as unprogrammed. A second scan three weeks later confirmed the bpcm remains unprogrammed and three active dtcs are present. The dealership has confirmed these findings but is attempting to release the vehicle in this condition. Records show recall 03a for loss of motive power was previously performed on this vehicle. The same symptoms have recurred, suggesting the recall remedy may not have been effective. The dealership is denying warranty coverage while refusing to program the bpcm that would confirm or deny that coverage. Stellantis customer care has closed my case twice without resolution. I have formally refused pickup on safety grounds.

NHTSA complaint #11750023
Jun 16, 2026power train, electrical system, fuel/propulsion system
My 2017 Chrysler Pacifica hybrid entered limp mode and was taken to central florida Chrysler dodge on xxx. The service advisor, [xxx], identified three recalls, which needed to be completed, after claiming they had completed them, the issue persisted. I authorized a coolant flush without being informed it involved the battery cooling system. Further diagnostics revealed a… Read more

My 2017 Chrysler Pacifica hybrid entered limp mode and was taken to central florida Chrysler dodge on xxx. The service advisor, [xxx], identified three recalls, which needed to be completed, after claiming they had completed them, the issue persisted. I authorized a coolant flush without being informed it involved the battery cooling system. Further diagnostics revealed a failed hybrid battery. However, Chrysler denied the battery replacement claim, citing contamination from “incorrect” coolant. I dispute this reasoning, as I was not properly informed about the coolant issue and believe there is no proof that it caused the battery failure. Under the magnuson-moss warranty act, a warranty or recall claim cannot be denied without clear evidence linking the fluid to the failure. I have opened a case with Chrysler (case #xxx) and am requesting that the battery replacement be honored under the recall, especially since recall guidelines indicate that unresolved issues after software updates may require component replacement. After a days of back and forth, not the dealership claims the pim is not the original part of the vehicle and for that reason it would be covered under warranty. However the law is clear and Chrysler is obligated to replace it since this part is also part of the recall they claimed was completed. Now the dealer wants us$ 5k to replace the pim. I need NHTSA to intervene please. Information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 55

NHTSA complaint #11744433
Jun 3, 2026hybrid propulsion system

The contact owns a 2017 Chrysler Pacifica. The contact stated that the vehicle was taken to the dealer to complete a recall repair for NHTSA campaign number 24v536000 (hybrid propulsion system). The contact was advised that the parts were not available and on back order with no estimated time of arrival. The manufacturer was notified of the issue. The approximate failure mileage was 128,000.

NHTSA complaint #11741827
Apr 16, 2026power train, engine, fuel/propulsion system
My 2017 Chrysler Pacifica experienced repeated engine timing and oil system failures. The vehicle first developed a check engine light and engine timing code (p000d – camshaft position slow response). The vehicle was inspected by a dealership service department. Shortly after, a major engine oil leak was discovered from the oil cooler / oil filter adapter assembly. The… Read more

My 2017 Chrysler Pacifica experienced repeated engine timing and oil system failures. The vehicle first developed a check engine light and engine timing code (p000d – camshaft position slow response). The vehicle was inspected by a dealership service department. Shortly after, a major engine oil leak was discovered from the oil cooler / oil filter adapter assembly. The vehicle required repair of the oil cooler assembly and associated seals. After that repair, the vehicle continued to experience engine timing issues. The dealership later confirmed failure of the cam phaser components associated with the engine timing system and performed a repair. Within days of the repair, the check engine light and engine timing code returned again. The failure involves the engine valve timing system and oil pressure dependent components based on autozone code check. Improper camshaft timing can affect engine operation, cause loss of power, rough running, or possible engine stall while driving, which creates a safety risk in traffic. The issue has been inspected and confirmed by a dealership service department. The vehicle is available for inspection upon request.

NHTSA complaint #11731657
Apr 2, 2026electrical system, fuel/propulsion system
I experienced a check engine light and intermittent starting issues with my vehicle (Chrysler Pacifica hybrid 2017). [xxx] at times, the vehicle would not start, but after some time it could start again. After researching the issue online, I found that there are active safety recalls for this vehicle related to the hybrid system (including battery and inverter/pim). I… Read more

I experienced a check engine light and intermittent starting issues with my vehicle (Chrysler Pacifica hybrid 2017). [xxx] at times, the vehicle would not start, but after some time it could start again. After researching the issue online, I found that there are active safety recalls for this vehicle related to the hybrid system (including battery and inverter/pim). I immediately contacted the dealer: [xxx] an appointment was scheduled for april 1, 2026 at 4:00 pm. I dropped off the vehicle at approximately 3:50 pm and handed over the keys. Prior to visiting the dealer, I purchased a diagnostic subscription tool to better understand the issue, as many owners report dealers misdiagnosing these problems. The diagnostic results indicated issues related to the pim (power inverter module), including required updates and possible internal diode failure. This matches the symptoms I experienced, where the vehicle would intermittently fail to start. I have attached photos showing error messages related to pim update and hybrid system faults. On the next day, the dealer informed me that they would only perform a diagnostic for $180 instead of processing the issue under recall. I believe this is incorrect, as the symptoms match known recall conditions (loss of power / hybrid system failure), and recall-related diagnostics should not be charged to the customer. The dealer is refusing to proceed under recall and is attempting to charge for diagnosis. This is a safety issue an

NHTSA complaint #11728737
Jan 6, 2026electrical system, fuel/propulsion system
This is a complaint regarding an inadequate recall remedy for recall z75 (NHTSA 24v-538). The manufacturer's software update rendered my 2017 Pacifica hybrid inoperable due to dtc p0c77. While the battery was ultimately replaced under warranty, the manufacturer is refusing to reimburse $1,948.74 in rental expenses despite a prior verbal commitment to do so. This constitutes a… Read more

This is a complaint regarding an inadequate recall remedy for recall z75 (NHTSA 24v-538). The manufacturer's software update rendered my 2017 Pacifica hybrid inoperable due to dtc p0c77. While the battery was ultimately replaced under warranty, the manufacturer is refusing to reimburse $1,948.74 in rental expenses despite a prior verbal commitment to do so. This constitutes a failure to provide a 'free and effective remedy' as required by federal law for safety recalls.

NHTSA complaint #11709202
Dec 28, 2025electrical system, unknown or other, fuel/propulsion system
We bought this vehicle from a local dealer in march (9months ago) in the time we’ve had it… it’s been in the shop for about 6 of them. 1- about 3 weeks after the purchase it shut off while I was driving on the highway. We then took it to the dealership in jasper, ga bc the error code said the PCM needed to be reset. They couldn’t get it to reset so they embarked on a… Read more

We bought this vehicle from a local dealer in march (9months ago) in the time we’ve had it… it’s been in the shop for about 6 of them. 1- about 3 weeks after the purchase it shut off while I was driving on the highway. We then took it to the dealership in jasper, ga bc the error code said the PCM needed to be reset. They couldn’t get it to reset so they embarked on a diagnostic that took 3 months to discover the fuel pump was “too small”. The dealership repair guy assured us this was a solve to the issue, they’re tech put 200 miles on it an had no issues. 2- the day we got it back the check engine light came on and while going around a curve to the right, the wheel locked up on me and almost drove me into a mailbox. We turned around and went right back to the dealership. They had it for another couple weeks and told us we needed a new rack and pinion. We couldn’t afford the $6000 they wanted to fix that. So we then called the guy we bought it from and he had a local repair shop take a look and they replaced some parts on the rack and said it was good to go. 3- got it back and the check engine came on again, they code said PCM needed to be reset. We couldn’t get the dealership to call us back so we went to the local shop o’reileys recommended and they deducted some gauges needed to be replaced. 4- within a couple weeks the van was sputtering and cutting off again, we took it back to the local shop and the only thing they could think to do was change the auxiliary battery.

NHTSA complaint #11707399
Dec 20, 2025fuel/propulsion system
Due to faulty plastic fuel neck hose . When pumping gas the gas tank piece broke off .which now I have hard time putting gas in , I can never get it filled up with gas because it keeps stopping as if it’s full , which in this case it’s not . And I have to hold the piece to get fuel in . This can be dangerous it could cause over fill gas to flow over or even on one’s skin or… Read more

Due to faulty plastic fuel neck hose . When pumping gas the gas tank piece broke off .which now I have hard time putting gas in , I can never get it filled up with gas because it keeps stopping as if it’s full , which in this case it’s not . And I have to hold the piece to get fuel in . This can be dangerous it could cause over fill gas to flow over or even on one’s skin or instance catch on fire . This part needs to be stronger as in metal not plastic fuel neck. Also without warning no lamp lights showed up .

NHTSA complaint #11706340
Sep 21, 2025fuel/propulsion system
The fuel cap snapped off. While trying to avoid a $1000 plus garage bill I was researching on how we could possibly fix this at home. While doing the research I’ve found hundreds if not thousands of people on Chrysler forums stating they’ve had the same issue and almost all breaks are identical. I/we that have these issues and them being so common including identical breakage… Read more

The fuel cap snapped off. While trying to avoid a $1000 plus garage bill I was researching on how we could possibly fix this at home. While doing the research I’ve found hundreds if not thousands of people on Chrysler forums stating they’ve had the same issue and almost all breaks are identical. I/we that have these issues and them being so common including identical breakage find that it should be chryslers problem to fix as they clearly used faulty products that now cause major emissions issues and fueling issues. Gas spills out everywhere as the pumps register the tank as full so it either stops the pump or it spews gas out not allowing the gas to go into the tank. I’d like this to be looked into as a bigger recall since it’s very obviously a huge issue in many pacificas across the nation.

NHTSA complaint #11688704
Sep 20, 2021power train, service brakes, fuel/propulsion system1 injured
While traveling on a dry highway, with good tires/new tires, and decelerating from 45 MPH and approaching a red light, and a moderate, but firm pressure on the brake to bring the van to a full stop, the speed decreased to 15 MPH, with the tachometer stable at 800 rpm and then to 10 MPH, with both hands on the wheel, left foot on the dead pedal, and right foot on the middle of… Read more

While traveling on a dry highway, with good tires/new tires, and decelerating from 45 MPH and approaching a red light, and a moderate, but firm pressure on the brake to bring the van to a full stop, the speed decreased to 15 MPH, with the tachometer stable at 800 rpm and then to 10 MPH, with both hands on the wheel, left foot on the dead pedal, and right foot on the middle of the brake pedal. As the speedometer made the transition at 10 MPH, the tachometer surged to 1500 rpm and then to 3000 in under 3 seconds, which cause me to initiate an emergency action drill of stabbing the brake pedal hard three times and rotating the transmission control to the lowest gear. The transmission refused to shift lower, and the control of the vehicle turned on oa wrestling match and the tachometer surged from 1500 rpm, them 3000 rpm, then 4500 rpm, and then 6000 rpm, each time the vehicle acting like it was repeatedly being rear-ended at a speed exceeding 15 MPH. The engine could not be disengaged and aceelaretd uncontrollably to over 40 MPH, through a busy intersection, and required over 24 hard break stages over a 10 second period to actually stop the car, and the engine refused to disengage until stopped. Once the car was restarted it immediately surged forward trying to fight through the hard applied brakes. The cruise control was never on the entire time. I then stut down the engine once I was able to wretle it to a stop with the engine climbing to over 4500 rpm. I then took this vehicl

NHTSA complaint #11433618
← All 2017 Chrysler Pacifica problems & recalls