CarProblemsDB

2007 Chrysler Aspen transmission problems

14 owners reported transmission & powertrain problems — 6% of all 244 complaints about the 2007 Chrysler Aspen.

Transmission & powertrain complaints by Chrysler Aspen year

200910
200816
200714

What owners report

Apr 2, 2020power train
Tl* the contact owns a 2007 Chrysler Aspen. The contact stated that when the vehicle was stationary or being driven at various speeds, the vehicle independently switched to 4 wheel drive. The 4 wheel drive red light flashed during the failure. The contact had not taken the vehicle to a dealer to be diagnosed. The manufacturer had not been notified of the failure. The vehicle… Read more

Tl* the contact owns a 2007 Chrysler Aspen. The contact stated that when the vehicle was stationary or being driven at various speeds, the vehicle independently switched to 4 wheel drive. The 4 wheel drive red light flashed during the failure. The contact had not taken the vehicle to a dealer to be diagnosed. The manufacturer had not been notified of the failure. The vehicle had not been repaired. The failure mileage was approximately 110,000.

NHTSA complaint #11320082
Jul 16, 2019power train

Failing lifters and camshaft which is happening to over 5000 separate owners across the united states. The lifters and camshaft fail no matter how well you keep up your maintenance. I had the cam and lifters replaced twice once at 98000 miles by Chrysler and now I need them replaced again at 195000 miles which very common with owners of this engine

NHTSA complaint #11232223
Sep 27, 2018power train, electrical system, electronic stability control (esc)
My four wheel drive automatically engages. Dealer wants me to spend money on parts and are only guessing that those parts will fix the problem. Not once have they checked the wiring. The engagement happens when stationary (unlocking the car). Sometimes when I turn at very low speeds. The lights come one when driving high speed but nothing happens. The following lights turn… Read more

My four wheel drive automatically engages. Dealer wants me to spend money on parts and are only guessing that those parts will fix the problem. Not once have they checked the wiring. The engagement happens when stationary (unlocking the car). Sometimes when I turn at very low speeds. The lights come one when driving high speed but nothing happens. The following lights turn on: 4wheel service, electronic stability. I feel it is a wiring problem.

NHTSA complaint #11131915
Apr 18, 2018power train
Tl* the contact owns a 2007 Chrysler Aspen 4x4. While driving, the vehicle switched to 4-wheel drive automatically. There were no warning indicators illuminated. The vehicle was taken to the dealer (autonation Chrysler dodge jeep ram roseville, 200 automall dr., roseville, ca 95661), but the failure could not be duplicated. The vehicle was not repaired. The manufacturer was… Read more

Tl* the contact owns a 2007 Chrysler Aspen 4x4. While driving, the vehicle switched to 4-wheel drive automatically. There were no warning indicators illuminated. The vehicle was taken to the dealer (autonation Chrysler dodge jeep ram roseville, 200 automall dr., roseville, ca 95661), but the failure could not be duplicated. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was 17,000.

NHTSA complaint #11088883
Apr 5, 2018power train, electrical system

The svc 4wd indicator light won't go off and the vehicle is stuck in 4x4

NHTSA complaint #11083525
Mar 17, 2017steering, power train, air bags, wheels, traction control system
Tl* takata recall. The contact owns a 2007 Chrysler Aspen 4x4. The contact stated that the wheels randomly locked and the traction control warning indicator randomly flashed. As a result, the power steering was extremely affected and the steering wheel was difficult to maneuver as the front and rear wheels locked up. In addition, the four wheel drive indicator randomly flashed… Read more

Tl* takata recall. The contact owns a 2007 Chrysler Aspen 4x4. The contact stated that the wheels randomly locked and the traction control warning indicator randomly flashed. As a result, the power steering was extremely affected and the steering wheel was difficult to maneuver as the front and rear wheels locked up. In addition, the four wheel drive indicator randomly flashed and the gears independently shifted at a low rate of speed. The vehicle was not inspected and diagnosed by a dealer. The manufacturer was notified of the failure. The VIN was also included in NHTSA campaign number: 16v352000 (air bags). The approximate failure mileage was 147,000. VIN tool confirms parts not available.

NHTSA complaint #10966462
Oct 6, 2015power train, electrical system

Tl* the contact owns a 2007 Chrysler Aspen. The contact stated that the vehicle failed to start and the gear shifter was stuck in one position. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The approximate failure mileage was 109,000.

NHTSA complaint #10780219
Jul 13, 2015power train
Vehicle randomly shifts from awd to 4 lock or 4 low. Usually at low speeds. Transfer case may also shift to neutral. When backing or turning sharply, as in parking, is the most likely time of occurrence. Transfer case also shifts when using the key fob to lock/unlock doors while vehicle is off and parked. I have almost been hit after backing out of a parking space and was… Read more

Vehicle randomly shifts from awd to 4 lock or 4 low. Usually at low speeds. Transfer case may also shift to neutral. When backing or turning sharply, as in parking, is the most likely time of occurrence. Transfer case also shifts when using the key fob to lock/unlock doors while vehicle is off and parked. I have almost been hit after backing out of a parking space and was unable to get to traffic speed due to random shift to low range. Vehicle has also shifted to neutral after parking, causing it to roll on slightly inclined driveway, nearly dragging me and/or striking my children who were in the driveway.

NHTSA complaint #10733809
Jun 6, 2013power train, engineCrash
My 2007 Chrysler Aspen was in "park" at a gasoline station. The car shifted into reverse while I was filling the tank. I tried to jump in the car as it was rolling and was drug along the cement.the car was eventually stopped when the door hit a cement pole. This resulted in approximately $2200 in damages to the door of the vehicle and quite a few cuts, scrapes and bruises… Read more

My 2007 Chrysler Aspen was in "park" at a gasoline station. The car shifted into reverse while I was filling the tank. I tried to jump in the car as it was rolling and was drug along the cement.the car was eventually stopped when the door hit a cement pole. This resulted in approximately $2200 in damages to the door of the vehicle and quite a few cuts, scrapes and bruises on my body. The car had shifted out of gear several times before (usually while I was in reverse) and had been reported to Chrysler, but because they couldn't get the car to do it while it was in the shop, they refused to fix it. The key also would stick when starting the car leaving it to rev while I tried to get the key out. I was told by the repairman that Chrysler was aware of these issues, but until they found a fix there was nothing they could do. I have read where other Chrysler models were recalled for these same issues, but the Aspen has never been included in the recall. I have since traded in the vehicle for another brand because of these issues. *tr

NHTSA complaint #10515487
Apr 12, 2011power train, vehicle speed controlCrash
The Aspen lurched backwards approximately fifty feet at a very high rate of speed, just after being put into reverse. It was stopped when it crashed into a garage and a toyota prius. The prius was totaled, the Aspen severely damaged, the garage doors were yanked out of the ceiling and shattered, and other parts of the garage were damaged. Anyone who would have been behind… Read more

The Aspen lurched backwards approximately fifty feet at a very high rate of speed, just after being put into reverse. It was stopped when it crashed into a garage and a toyota prius. The prius was totaled, the Aspen severely damaged, the garage doors were yanked out of the ceiling and shattered, and other parts of the garage were damaged. Anyone who would have been behind the vehicle at the time would have been severely injured or killed. For approximately three weeks prior to this incident, there was an intermittent problem with the reverse transmission. Occasionally when placed into reverse, the car would only go a short distance in reverse, as if the clutch was not catching. The engine would rev up, and then the car would come to an abrupt halt. The halt was very abrupt and "mechanical" as if something was being caught - the first time this happened a passenger in the car thought the car struck something in reverse. There were never any issues with the transmission going forward, and this reverse issue only happened about 10% of the times the car was put in reverse. In between the car was fine in reverse. This never seemed like a safety issue because the car stopped abruptly when going backwards in previous instances - it did not go backwards uncontrollably as occurred in the incident. A Chrysler investigator came out the day following this incident. He concluded that the driver of the car accidentally put her foot on the gas pedal rather than brake. We are qu

NHTSA complaint #10396331
Dec 21, 2010power trainCrash
On 18 november 2010 around 6 pm, my vehicle was parked in the driveway of my home approximately three feet from the garage entrance. To move the vehicle into the garage for the night, I got in the vehicle, closed the door, stepped on the brake, let off the emergency brake, started it, put the transmission in 'd', let off the brake, and did not touch the gas pedal. The… Read more

On 18 november 2010 around 6 pm, my vehicle was parked in the driveway of my home approximately three feet from the garage entrance. To move the vehicle into the garage for the night, I got in the vehicle, closed the door, stepped on the brake, let off the emergency brake, started it, put the transmission in 'd', let off the brake, and did not touch the gas pedal. The engine immediately cycled up to 4000 rpm, and the vehicle immediately started moving forward. I then hit the brake to no effect on speed. The vehicle proceeded through the garage, impacted my steel workbench/tool container, went through the back wall and the front end impacted the ground seven feet below the garage dropoff and the engine turned off. The air bags did not deploy. I removed the key and got out of the vehicle. My neighbors witnessed the event as the vehicle drove out the back of the garage. Fortunately I was not injured, but went to the emergency room at ft belvoir amc. Since I have owned this vehicle, we have experienced a hole in the AC compressor, flickering of the driver's side foot well light, loss of ignition while driving and when the transmission is placed in 'r' it would fall out of gear. All were reported over the last three years at Chrysler dealers in ca, ms and va. I reported this to Chrysler late november and received a letter back on 17 december from Chrysler customer claims resolution group stating the found no problems with the vehicle that may have contributed to this

NHTSA complaint #10371913
Sep 21, 2009power train1 injured

The transmission slips out of gears (from park to reverse, reverse to neutral, etc.). *tr

NHTSA complaint #10284729
← All 2007 Chrysler Aspen problems & recalls