Jul 20, 2022steering, suspension, power train
Reverse gear went out after vehicle slipped once, acted as if in neutral when in reverse and pressing gas pedal down but would not move. Had local towing and mechanic shop in gower missouri check transmission fluid level in which was found to be a quart low on transmission fluid. Car had been extremely well maintained and all recommended maintenance services completed by… Read more
Reverse gear went out after vehicle slipped once, acted as if in neutral when in reverse and pressing gas pedal down but would not move. Had local towing and mechanic shop in gower missouri check transmission fluid level in which was found to be a quart low on transmission fluid. Car had been extremely well maintained and all recommended maintenance services completed by previous owners. Able to drive car in all other gears, codes p0007 code appear with no check engine light or any type of warning or indication that a problem was present within my 2005 Chrysler 300 3.5l v6 rwd car with the 42rle transmission my vehicle also has issues occur suddenly regarding front end suspension has death shake and very loud clinking popping banging noises while driving at all speeds. Steering wheel has a weird squeek/creeking noise when turning the wheel at times and feels like steering is loose. Tie rod end and sway link bar on front passenger right side of vehicle is bent opposite direction it is supposed to and car also has higher rpm than normal and shifting at higher rpms. Went into limp mode twice which I reset myself due to having an emergency where I had to drive it. With the suspension and steering issues it causes a safety risk due to sway link and tie rod end breaking causing vehicle to crash and wheel to detach from vehicle. Transmission gear loss due to transmission fluid leaking and gear linkage issues causes safety risk due to the event of reversing to move out of the wa
NHTSA complaint #11474862
Nov 28, 2018suspension, electrical system
I been owning this 2005 Chrysler 300 limited for about 4 years now, and the lights flickers all the time.. Dealership charge 95.00 for that it should be free because everyone that has a car like mine had the same problem the front suspension I had changed 3 times completely and it's not the parts it's the quality of the product, I am very disappointed I love the body style of… Read more
I been owning this 2005 Chrysler 300 limited for about 4 years now, and the lights flickers all the time.. Dealership charge 95.00 for that it should be free because everyone that has a car like mine had the same problem the front suspension I had changed 3 times completely and it's not the parts it's the quality of the product, I am very disappointed I love the body style of the Chrysler 300 including the new one I brought a 2018 dodge challenger this year because I was so disappointed with Chrysler hopefully someone looks at the vehicle problems and actually have a complete recall on the vehicle
NHTSA complaint #11154584
Jul 4, 2017suspension
Severe rusting and rotting of cradle and suspension. Mechanic would not allow car to pass inspection.
NHTSA complaint #11002959
Jul 22, 2016suspension, fuel/propulsion system
Y'all had a recall on the gas tank ever since I had a gas tank replaced I continue to smell gas fumes coming from the fuel line has a leak in it and I'm trying to find out do y'all have a recall on it at all and I have a vibration coming in from my brake system and I can't seem to find out what is coming from but it says possibility that I have an issue with the break line.
NHTSA complaint #10887794
Mar 7, 2014steering, suspension, wheels1 injured
Car shaking like tires about to fall off, had it check and it was my tire rods and need a front end alignment and tires. *tr
NHTSA complaint #10567803
Dec 26, 2007steering, suspension, engine and engine coolingCrash1 injured
Major vibration in right front wheel, turns out I was almost killed, thankfully I pulled over the rack/pinion assembly broke! That was an over the weekend project for dealership. Luckily covered under warranty! Now I have a binding noise in steering column, at the hook joint inside the boot covering joint, dealer greased, but noise is back, feels like column is going to snap!… Read more
Major vibration in right front wheel, turns out I was almost killed, thankfully I pulled over the rack/pinion assembly broke! That was an over the weekend project for dealership. Luckily covered under warranty! Now I have a binding noise in steering column, at the hook joint inside the boot covering joint, dealer greased, but noise is back, feels like column is going to snap! They won't look at without a charge! Also have rattle in dash, knocking in brakes! I'm really sorry I purchased the vehicle, now I know why I got such a great deal! They just wanted to unload!!!!!concerned for my life!!!while driving my 300!!!!!!!!!!!!seriously,I do want to see my children's weddings!!!!! *tr
NHTSA complaint #10212888
Feb 23, 2006suspension, air bagsCrash
Dt*: the contact stated while driving at 50 MPH the accelerator pedal became stuck in the depressed position which resulted in an accident with another vehicle. There was severe damage to the chassis of both vehicles. However, the air bags of the contact's vehicle did not deploy. It was taken to a service dealer but the mechanic was unable to duplicate the problem with the… Read more
Dt*: the contact stated while driving at 50 MPH the accelerator pedal became stuck in the depressed position which resulted in an accident with another vehicle. There was severe damage to the chassis of both vehicles. However, the air bags of the contact's vehicle did not deploy. It was taken to a service dealer but the mechanic was unable to duplicate the problem with the accelerator pedal. Also, the vehicle continuously pulled to the right and required excessive force to keep the vehicle moving straight. The vehicle was taken to service dealer where the tires were rotated. Shortly after the tire rotation, the tread became completely worn. The mechanic determined the suspension was the cause of the problem.
NHTSA complaint #10151015
May 4, 2005steering, suspension, wheelsCrash
While driving my 2005 Chrysler 300 with the hemi motor thru my subdivision at 25mi per hour the rack-n-pinion broke and the stabilizer bar broke, causing a badly bent rim, that caused the bolts under the car to become sheared off, causing a accident. Just and fyi I purchased the car 12/04 and the parts broke off on 3/19/2005
NHTSA complaint #10119762