CarProblemsDB

2000 Chevrolet Silverado 2500 brakes problems

70 owners reported brakes problems — 59% of all 119 complaints about the 2000 Chevrolet Silverado 2500.

Brakes complaints by Chevrolet Silverado 2500 year

20265
202439
20233
202212
202112
202020
20196
20181
20175
201615
201537
20142
20139
20122
20101
20095
200671
200574
200435
200354
200260
200144
200070

What owners report

Nov 14, 2020steering, service brakes

Steering locked up brake quit working. In motion

NHTSA complaint #11374695
Jul 26, 2019service brakes
Tl* the contact owns a 2000 Chevrolet Silverado 2500. While driving 30 MPH, the vehicle took a long time to slow down when the brake pedal was depressed. On another occasion, when barely depressing the brake pedal, the vehicle completely stopped, causing the contact to jerk forward. The contact associated the failure with NHTSA campaign number: 05v379000 (service brakes,… Read more

Tl* the contact owns a 2000 Chevrolet Silverado 2500. While driving 30 MPH, the vehicle took a long time to slow down when the brake pedal was depressed. On another occasion, when barely depressing the brake pedal, the vehicle completely stopped, causing the contact to jerk forward. The contact associated the failure with NHTSA campaign number: 05v379000 (service brakes, hydraulic). There were no warning indicators illuminated. An independent mechanic was unable to duplicate the failure. The vehicle was not diagnosed or repaired. The dealer was not contacted. The manufacturer was informed of the failure. The failure mileage was 325,400. *bf *tr

NHTSA complaint #11235095
Aug 8, 2017steering, unknown or other, service brakes

Steering problem. Power steering goes out when slow down. Chevrolet is very aware of the problem and there is currently a recall on the later model vehicles. The 2000 we have is very dangerous and we have reported it numerouse times and wonder how many tragic accidents have to happen before it is corrected?

NHTSA complaint #11013624
Jun 22, 2017service brakes
I am unhappy that GM made a recall for the problem my silverado is exhibiting however since I do not live in the neighboring state I cannot have my problem fixed. I also live in the "salt belt" being in kansas, I live 20 miles from the state of mo. I am having the exact problem as the recall - 05v379000. I wish I knew who I could contact to aid me in solving this problem. It… Read more

I am unhappy that GM made a recall for the problem my silverado is exhibiting however since I do not live in the neighboring state I cannot have my problem fixed. I also live in the "salt belt" being in kansas, I live 20 miles from the state of mo. I am having the exact problem as the recall - 05v379000. I wish I knew who I could contact to aid me in solving this problem. It sounds like this results in a crash due to constant corrosion. If you look at statistics of kansas city. We are equivalent to kansas city mo. I'm feeling very frustrated about this.

NHTSA complaint #11000727
Nov 5, 2016service brakes
When coming to a stop sign I applied the brakes and the pedal went to the floor. I was able to steer into a parking lot and coasted to a stop. I had no brakes front or rear. When I stopped at the previous stop sign the brakes worked as usual. After having the pickup towed to a repair shop I was told and shown that the brake lines at the frame behind the left tire had rusted… Read more

When coming to a stop sign I applied the brakes and the pedal went to the floor. I was able to steer into a parking lot and coasted to a stop. I had no brakes front or rear. When I stopped at the previous stop sign the brakes worked as usual. After having the pickup towed to a repair shop I was told and shown that the brake lines at the frame behind the left tire had rusted through. This failure came with no warning and at no time did the dash brake light come on.

NHTSA complaint #10924450
Aug 9, 2016service brakes
I was driving approx. 25 MPH within 100 ft. Toward a red light. A truck pulling a trailer pulled across the road in front of me. I pressed on the brake pedal. The pedal held for a second and then quickly dropped to the floor. I was able to swerve to the right of the truck, missing it and pushed the emergency brake. Realizing I encountered total brake failure I cautiously drove… Read more

I was driving approx. 25 MPH within 100 ft. Toward a red light. A truck pulling a trailer pulled across the road in front of me. I pressed on the brake pedal. The pedal held for a second and then quickly dropped to the floor. I was able to swerve to the right of the truck, missing it and pushed the emergency brake. Realizing I encountered total brake failure I cautiously drove the truck into a mcdonald's parking lot at the corner. There was no brake warning light come on. I looked under the truck. On the drivers side under the drivers door the underside was soaked with brake fluid. Where the 4 brakelines are bundled together directly on the frame under the drivers door, one of the brake lines has a split in it. The truck is presently being evaluated for repair.

NHTSA complaint #10894645
Nov 25, 2014service brakes
Tl* the contact owns a 2000 Chevrolet Silverado 2500. While entering the driveway, the brake pedal sank to the floor. After inspecting the vehicle, the contact indicated that the brake lines rusted to the point of corrosion and fractured. Also, the contact noticed the presence of brake fluid leaking from the vehicle. The contact was able to park the vehicle. The vehicle was… Read more

Tl* the contact owns a 2000 Chevrolet Silverado 2500. While entering the driveway, the brake pedal sank to the floor. After inspecting the vehicle, the contact indicated that the brake lines rusted to the point of corrosion and fractured. Also, the contact noticed the presence of brake fluid leaking from the vehicle. The contact was able to park the vehicle. The vehicle was taken to an independent mechanic who replaced all four brake lines. The manufacturer was notified of the failure. The approximate failure mileage was 216,563.

NHTSA complaint #10660885
Jul 8, 2014service brakes
My oldest son was driving my 2000 chevy 2500 pickup truck when the brake pedal almost went all the way to the floor of the truck. He narrowly missed rear ending the car in front of him. He was able to drive very slowly home with a very mushy feeling brake pedal. When I inspected the truck I found that the brake lines had rusted so bad the brake line had ruptured and was… Read more

My oldest son was driving my 2000 chevy 2500 pickup truck when the brake pedal almost went all the way to the floor of the truck. He narrowly missed rear ending the car in front of him. He was able to drive very slowly home with a very mushy feeling brake pedal. When I inspected the truck I found that the brake lines had rusted so bad the brake line had ruptured and was leaking fluid under the drivers side door. *js

NHTSA complaint #10609072
Apr 5, 2014service brakes
I had just picked up a trailer at u haul and was driving down the hill in front of their store to finish signing the paperwork. At the bottom of the hill I began to apply the brakes and the brake pedal went to the floor. I came close to running into the u haul building but the truck finally stopped just in time. I put the truck in park and got out to see what happened. I went… Read more

I had just picked up a trailer at u haul and was driving down the hill in front of their store to finish signing the paperwork. At the bottom of the hill I began to apply the brakes and the brake pedal went to the floor. I came close to running into the u haul building but the truck finally stopped just in time. I put the truck in park and got out to see what happened. I went to the front of the truck, looked under and saw nothing. I went to the back of the truck and looked under and there was fluid steadily dripping and a huge puddle of brake fluid under the truck. I disconnected the trailer and called a friend to pick me up. Once I got the truck home, I began searching for the source of the leak (at this point I thought I had busted a brake hose) I quickly realized this was not a brake hose that had ruptured. The brake line that runs past the gas tank and rear differential was rusted through and had a hole in it. All of the brake lines were rusting in the rear of the vehicle. I took a picture of the line with the hole and went off to the Chevrolet dealership. Once at the dealership, I was told by the young man working the parts counter that Chevrolet did not sell replacement brake lines. He told me that I would have to buy bulk brake tubing and make my own lines. I let him know that the line that ruptured on my truck had over 20 bends on it and that the last four bends would be very difficult to bend by hand. I got nowhere with Chevrolet on replacement parts. I wound up ord

NHTSA complaint #10577548
Mar 31, 2014steering, service brakes
I have problems with my brakes and steering when I am braking and turning right or left. The power steering completely go out . I have to use all me strength to turn the steering wheel. Once you complete the turn and let off the brake the power steering comes back the steering wheel jerks back in place. I have replaced the booster, supply lines on brakes, power steering pump… Read more

I have problems with my brakes and steering when I am braking and turning right or left. The power steering completely go out . I have to use all me strength to turn the steering wheel. Once you complete the turn and let off the brake the power steering comes back the steering wheel jerks back in place. I have replaced the booster, supply lines on brakes, power steering pump and supply lines and truck stills has same problem. The mechanics tell me that it is a design problem and Chevrolet will not recall and repair. All owners of these trucks need help as this is a very dangers problem. I have just seen on the news that Chevrolet is recalling a lot of vehicles and my model needs to be recalled and repaired also. *tr

NHTSA complaint #10576095
Feb 27, 2014service brakes

The brake pedal went to the floor, due to a hole in the brake line caused by external corrosion. Luckily it was not at a stop street, or there would have been an accident. It occurred on the highway, so my wife was able to slowly drive home. I had to have all of the steel lines replaced for the vehicle to be safely driven again. *tr

NHTSA complaint #10566311
Nov 5, 2013service brakes

The hard line brake line started leaking fluid out. *tr

NHTSA complaint #10550953
Oct 8, 2013service brakes

Went to move the truck, brake pedal went to the floor. Left rear line has a leak where the line runs along the frame by the fuel tank. About 2 years ago I had to have the front lines replaced because they were leaking. *tr

NHTSA complaint #10547306
Aug 29, 2013service brakesCrash

Traveling on road at posted speed of 35mph approaching a highway intersection. Tried to make a normal stop and brake pedal went to the floor. Truck went through red light and through intersection of a section of highway that is 8 lanes wide. If not for early time of day it would have been a lot more traffic and killed someone. Stopped truck by slamming into park. No brake warning light prior to this or after.

NHTSA complaint #10537842
Jul 30, 2013service brakes
Within a residential neighborhood approaching a stop sign at 30 MPH +/- and applied brakes evenly and smoothly. Pedal went to the floor and limited braking available. Proceeded cautiously to a park 2 blocks east. Parked and inspected vehicle. Found brake fluid leaking drivers front at upper back of caliper. Limped vehicle home, placed on stands, pulled wheel and found… Read more

Within a residential neighborhood approaching a stop sign at 30 MPH +/- and applied brakes evenly and smoothly. Pedal went to the floor and limited braking available. Proceeded cautiously to a park 2 blocks east. Parked and inspected vehicle. Found brake fluid leaking drivers front at upper back of caliper. Limped vehicle home, placed on stands, pulled wheel and found metal end of flexible brake line adjacent to the hollow bolt that connects to caliper was now multiple layers of rust saturated with brake fluid. Ordered in a replacement line and replaced. Old line retained and excess rust flaked back to reveal a pin hole rust through roughly 1/2 inch above caliper mounting point. Residual braking at time of failure was not capable of stopping a vehicle quickly in traffic or at highway speeds. Three or four years prior rear steel brake lines under bed failed during a panic stop when deer ran into the roadway. Rusted lines were the cause but under high pressure panic stop conditions. Not a gentle stop as the line above. *tr

NHTSA complaint #10532600
Jun 24, 2013service brakes
Backing out of my driveway, I stepped on the brake pedal and a stream of hydraulic brake fluid hit my wife. A brake line had burst and I completely lost brakes. I had vehicle towed to the dealer they charged $650 to replace the rusted brake line that had burst. Now I have lost brakes again 6/21/13 another leak from a rusted out hole in the brake line. I purchased this… Read more

Backing out of my driveway, I stepped on the brake pedal and a stream of hydraulic brake fluid hit my wife. A brake line had burst and I completely lost brakes. I had vehicle towed to the dealer they charged $650 to replace the rusted brake line that had burst. Now I have lost brakes again 6/21/13 another leak from a rusted out hole in the brake line. I purchased this truck new in 2000 and it has remained in florida the entire time. We have no road salt, we have no snow. How can you build a vehicle with brake lines that rust out?. Please help and recall this dangerous problem before innocent people get killed! *tr

NHTSA complaint #10521559
May 28, 2013steering, service brakes

Hydroboost leaking power steering fluid affecting steering and braking performance. Dipstick for measuring p/s fluid level was dry, and fluid stains all over the firewall and master cylinder resulting from the p/s fluid leaking. *tr

NHTSA complaint #10513912
Mar 17, 2013service brakes
Driving at 65 MPH, needed slow down for sudden traffic jam. Applied brakes and pedal sunk to floor. After brake pedal hitting the floor, finally had some braking power but nearly piled into vehicles in front of me. Brake fluid running out of vehicle. Repair facility identified ABS brake line rusted through and had to be replaced, which I visually verified. At no time prior… Read more

Driving at 65 MPH, needed slow down for sudden traffic jam. Applied brakes and pedal sunk to floor. After brake pedal hitting the floor, finally had some braking power but nearly piled into vehicles in front of me. Brake fluid running out of vehicle. Repair facility identified ABS brake line rusted through and had to be replaced, which I visually verified. At no time prior to, during or after the line failure, did I receive any ABS warning light that the ABS system had failed. *tr

NHTSA complaint #10503376
Jan 6, 2013service brakes

Brake line failure in lines to the ABS electro-hydraulic control unit. Loss of braking experienced. *tr

NHTSA complaint #10491555
Oct 3, 2012service brakes, fuel/propulsion system

Rusted out brake lines caused loss of fluid while driving. Rusted out fuel line caused fuel leak while driving. *tr

NHTSA complaint #10478508
Sep 13, 2012service brakes
Tl* the contact owns a 2000 Chevrolet k2500. The contact stated that while at a complete stop with the brakes depressed, the brakes failed without warning. The vehicle was taken to a repair shop where the contact was advised that the brake lines were corroded. The brake lines were replaced. The manufacturer was made aware of the failure and advised the contact to take vehicle… Read more

Tl* the contact owns a 2000 Chevrolet k2500. The contact stated that while at a complete stop with the brakes depressed, the brakes failed without warning. The vehicle was taken to a repair shop where the contact was advised that the brake lines were corroded. The brake lines were replaced. The manufacturer was made aware of the failure and advised the contact to take vehicle to the dealer for repairs. The vehicle was not taken to dealer. The approximate failure and current mileage was 130,000.

NHTSA complaint #10475260
Aug 20, 2012service brakes

Steel brake line ruptured while braking going down a steep hill with approximately 1,000# of cargo. This is the third such incident of a ruptured/leaking line on this truck. All lines were original equipment before failure. Brake pads/discs were replaced and rotors machined between the first and second brake line failure. The emergency brake was used to successfully stop the vehicle. *tr

NHTSA complaint #10471542
Jul 2, 2012service brakes

The hydraulic pump shaft broke the evening before very common on these trucks and Chevrolet did a limited recall. After replacing the pump the rear main brake line was rusted and could not handle the pressure of the new pump. *js

NHTSA complaint #10463971
Jun 13, 2012service brakes, hydraulic, service brakes
My brakes failed without warning in a parking lot. Carefully, I made it home with no brakes and found the brake lines were all corroded and leaked brake fluid. Brake lines are supposed to be made from non-corrosive material. Fixing brakes on this model pickup is a massive undertaking. One brake line is located under the bed of the truck. *tr when the consumer examined… Read more

My brakes failed without warning in a parking lot. Carefully, I made it home with no brakes and found the brake lines were all corroded and leaked brake fluid. Brake lines are supposed to be made from non-corrosive material. Fixing brakes on this model pickup is a massive undertaking. One brake line is located under the bed of the truck. *tr when the consumer examined the brakes on the vehicle, he was shocked to see the extent of corrosion on the meal brake line. He was also shocked to find that for one of the brake lines, he had to remove the truck bed, in order to see it. The first rupture occurred on the line running from the metering or proportional valve to the rear brakes. There was no way he could see that area. The second failure occurred during bleeding and testing of the first repair. The third leak appeared by the movement of the line during the second repair. All were due to corrosion in what should have been non-corrosive material. The consumer stated the location of the brake lines and the materials used were totally unacceptable and he is seeking reimbursement for parts and labor. Updated 06/29/12. *jb

NHTSA complaint #10461501
Feb 23, 2012service brakes, hydraulic, power train
Just backed into the st. Clair river to retrieve small boat. Loaded boat. As I put my foot down on brake pedal to move transmission to drive, brake pedal went to floor, got the trans to neutral, but not to drive. The truck and boat started to roll into river. Panic situation... Jambed trans into drive, and was able to get truck out of river, with water line half way up… Read more

Just backed into the st. Clair river to retrieve small boat. Loaded boat. As I put my foot down on brake pedal to move transmission to drive, brake pedal went to floor, got the trans to neutral, but not to drive. The truck and boat started to roll into river. Panic situation... Jambed trans into drive, and was able to get truck out of river, with water line half way up drivers door. Once home discovered badly rusted brake line above fuel tank ruptured. Repaired... Two months later, while wife was driving truck to work, brake line between master cylinder and ABS modual failed. Had enough! Replaced all brake lines on truck except the one over rear axel. I still willd o that one also. ABS/brake lights on dash are still illuminated. Still trying to figure out that issue.. Many discussions with other silverado owners, and autoparts employees. This seems to be a very common issue, with very dangarous potential for injurys.. *tr

NHTSA complaint #10449068
Jan 24, 2012service brakes, hydraulicCrash
On 11/23/2011 at 6:45 am est, I was headed down a snow covered road when I noticed a plow truck coming towards me at a high rate of speed. I then hit the brakes at normal pressure and the pedal went to the floor with next to no resistance, having no brakes I downshifted the automatic transmission slowing me but not fast enough, I collided with a fire hydrant at the top of a… Read more

On 11/23/2011 at 6:45 am est, I was headed down a snow covered road when I noticed a plow truck coming towards me at a high rate of speed. I then hit the brakes at normal pressure and the pedal went to the floor with next to no resistance, having no brakes I downshifted the automatic transmission slowing me but not fast enough, I collided with a fire hydrant at the top of a steep embankment on the side of the at approximately 35mph and knocked the fire hydrant out of the ground. Had the fire hydrant not been there, I could've fell more than 50 feet down to my demise. Luckily, the hydrant was shut off and the only damage (because the plow frame absorbed most of the impact) was the front bumper. I have had to pay $75 just to have the line patched good enough for the truck to be drivable, with imminent failure of the rear brake lines across the rear axle and the front brake lines to the front brake calipers. I have had this problem with both my Chevrolet Silverado 2500 (model year 2000) and my Chevrolet silverado 1500 (model year 1999). *tr

NHTSA complaint #10445136
Jan 4, 2012service brakes, hydraulic

Hard brake line failure on driver's side. Soft pedal and increased stopping distance. Exorbitant corrosion of lines. All metal lines need replacement on inspection. Also excessive rusting of entire underside of vehicle. *tr

NHTSA complaint #10442386
Dec 14, 2011service brakes, hydraulic

The brake lines have corroded and leaked fluid out and it caused complete failure of braking system. There were no symptoms giving warning to this failure. *tr

NHTSA complaint #10439906
Oct 16, 2011service brakes, hydraulic

The main brake line from the master cylinder to the antilock unit rusted through and leaked causing the brakes to fail. *tr

NHTSA complaint #10430423
Aug 2, 2011service brakes, hydraulic

Tl* the contact owns a 2000 Chevrolet Silverado 2500. The contact stated that while driving at low speeds and depressing the brakes, the pedal would go straight to the floor. The vehicle was taken to a dealer and they advised her that they were unable to diagnose the failure. The vehicle was not repaired. The failure mileage was approximately 26,500. The VIN was unavailable. Updated 2/21/12 *cn

NHTSA complaint #10416660
Mar 27, 2011service brakes, hydraulic

All of the brake lines in my 2000 chevy silverado are completely rusted out. I have had the brakes stop working after a brake line ruptured with no warning on two different occasions. *tr

NHTSA complaint #10393015
Mar 9, 2011service brakes, hydraulic
I was driving my 2000 Chevrolet Silverado 2500 pickup and pulling an empty 16\' cargo trailer, and started to decend a 8% grade hill. I had the trans in tow mode and started applying the brakes to slow from approx 50 MPH, as I was going to turn at the bottom of the hill. The brakes first held and then as I held brake pedal pressure constant the pedal went to the floor. I… Read more

I was driving my 2000 Chevrolet Silverado 2500 pickup and pulling an empty 16\' cargo trailer, and started to decend a 8% grade hill. I had the trans in tow mode and started applying the brakes to slow from approx 50 MPH, as I was going to turn at the bottom of the hill. The brakes first held and then as I held brake pedal pressure constant the pedal went to the floor. I quickly realized I was in trouble and pulled the trans to 3 and then 2. Thank god there was no one in front of me making the same left turn as I, as there was a steep tree lined hill to my right and it would have been catastrophic at that point. I stepped on the emergency brake and got the truck stopped but missed my turn by approx. 100 feet. I recovered my composure and after a few minutes stopped shaking enough to limp my truck home using the emergency brake and 2nd gear. I was approx. 2 miles from my home on a country blacktop road. When checking out the truck brake lines found them to be extremely rusty and in one place split. I replaced that line only to fail a 2nd line while bleeding the brakes in my driveway. After replacing the 2 lines from the master cylinder to the ABS module and the 2 lines from the module to the front wheel cylinders, I again ventured out only to again lose my brakes on the downgrade of my driveway again, which was the last straw, and I replace all the remaining lines. Pedal is still mushy but the brakes are holding and not leaking fluid. I am the 2nd owner of the truck and put ma

NHTSA complaint #10389588
Mar 2, 2011service brakes, hydraulic
While driving my silverado approaching a stop sign at 25 MPH, the brakes failed without warning, a car in front of me already stopped there! I had swerve around by going on the sidewalk and use the emergency brake to stop, thank god I didn't hit that car or any pedestrians. I noticed brake fluid dripping from frame above left rear wheel & rear axel. I had the silverado… Read more

While driving my silverado approaching a stop sign at 25 MPH, the brakes failed without warning, a car in front of me already stopped there! I had swerve around by going on the sidewalk and use the emergency brake to stop, thank god I didn't hit that car or any pedestrians. I noticed brake fluid dripping from frame above left rear wheel & rear axel. I had the silverado towed to the GM service center to inspect the brake lines; $99.00 plus tax GM service center said brake lines where rusted through and would be $1,012.98 plus tax! To repair leaking lines. I believe this ifailure is due to GM not utilizing stainless steel brake lines. *tr

NHTSA complaint #10386203
Jan 30, 2011service brakes, hydraulic
Brake system failure due to brake line corrosion. Third time this has happened. First two instances were on the rear lines due to exposure to salt spray. Recent occurrence was located at the retainment clip holding the two lines running downstream of the master cylinder to the frame rail. Both lines rusted through and began leaking. Lines started leaking when brakes were… Read more

Brake system failure due to brake line corrosion. Third time this has happened. First two instances were on the rear lines due to exposure to salt spray. Recent occurrence was located at the retainment clip holding the two lines running downstream of the master cylinder to the frame rail. Both lines rusted through and began leaking. Lines started leaking when brakes were applied in icy conditions. ABS system engaged and the added pressure lead to line failure. Vehicle continued into intersection due to reduced brake function. Fortunately did not result in a crash. *tr

NHTSA complaint #10379594
Jan 3, 2011service brakes, hydraulic

Brake line failure, left side behind wheel where lines run on top of frame. While in the drive thru lane at fast food restraint. Nearly pinned pedestrian between my truck and the vehicle in front of me. *tr

NHTSA complaint #10373914
Dec 9, 2010service brakes, hydraulic
Brake line leaking fluid. Wife stepped on brakes and rolled through intersection of highway k and highway n in st. Charles, mo. The line that failed is in the bundle along the frame under the drivers seat. All the lines show signs of rust. I understand this is not the first occurrence. Just glad she did not hit anyone or get injured. Hope you quit dragging your feet on… Read more

Brake line leaking fluid. Wife stepped on brakes and rolled through intersection of highway k and highway n in st. Charles, mo. The line that failed is in the bundle along the frame under the drivers seat. All the lines show signs of rust. I understand this is not the first occurrence. Just glad she did not hit anyone or get injured. Hope you quit dragging your feet on this issue and make the car company that the USA is invested in fix their brake problem. *tr

NHTSA complaint #10369847
Sep 1, 2010service brakes, hydraulic

The brake lines failed on my 2000 chevy Silverado 2500. The vehicle was backing down a boat launch ramp at the time and was stopped with the parking brake. The truck had to be towed and all of the metal brake lines replaced (the brake lines had to be made because GM does not sell replacement line). *tr

NHTSA complaint #10353276
Jul 31, 2010service brakes, hydraulic
For the time in 4 months, my 2000 Chevrolet k2500hd full sized pickup truck has experienced brake failure due to rust-through of a brake line. The first failure point was located near the right front wheel in the vicinity of the metal line to rubber hose connection, in the exact location where the metal line runs between the frame and the electrical connector for the antilock… Read more

For the time in 4 months, my 2000 Chevrolet k2500hd full sized pickup truck has experienced brake failure due to rust-through of a brake line. The first failure point was located near the right front wheel in the vicinity of the metal line to rubber hose connection, in the exact location where the metal line runs between the frame and the electrical connector for the antilock system's wiring to the right-front wheel sensor. Today's failure is located in the engine compartment directly under the master cylinder. The actual leak is in a section of line that is not obscured by any mounting points. It is out in the open and fully visible when looking into the engine compartment while standing in front of the vehicle. Several other sections of brake line appear have major rust issues also. This truck has 45,454 miles on it. The original brake master cylinder failed at 26,xxx miles. The vehicle's warranty had expired, so I was responsible for this repair. I have noticed the brake fluid in the reservoir of this vehicle has a history of turning to a dark color within a short period after a brake fluid flush, even after the replacement master cylinder was installed. I have never been satisfied with the stopping power of the brakes on this truck. I am the original owner, and since the truck was new I always felt the brakes had a very "spongy" feel. Even when new there were a few occasions when I experienced 'am I going to be able to stop' scares. I must now have the truck t

NHTSA complaint #10346500
Jul 6, 2010service brakes, hydraulic

Failure of steel brake lines resulting in loss of braking on 2000 Silverado 2500 4x4 pickup truck. *tr

NHTSA complaint #10341605
Jun 15, 2010service brakes, hydraulic

2000 Chevrolet 2500 pick up truck - third occurrence of significantly reduced braking ability due to corrosion of brake lines. Prior occurrences of brake line corrosion leading to significantly reduced braking ability occurred in oct 2007 and aug, 2009 (same problem - different brake line sections). *tr

NHTSA complaint #10336435
← All 2000 Chevrolet Silverado 2500 problems & recalls