11 owners reported fuel & propulsion system problems — 2% of all 565 complaints about the 2011 Chevrolet Silverado 1500.
Fuel & propulsion system complaints by Chevrolet Silverado 1500 year
20266
20257
202428
202340
202249
202132
202041
201939
201819
201732
201627
201530
201434
20134
20126
201111
20108
200915
200824
200719
200618
200516
200421
200329
200220
200164
200041
What owners report
Jan 31, 2025wheels, engine, fuel/propulsion system
The software that makes the truck work as a 4 cylinder truck has caused the engine light to come on and causing a code p0300 various engine misfire. The misfire is caused by the lifter spring causing the lifter to remain in the down position. The down position is against the can rod and as the cam rod rotates, this causes the lifter to break at the bottom and causing the can… Read more
The software that makes the truck work as a 4 cylinder truck has caused the engine light to come on and causing a code p0300 various engine misfire. The misfire is caused by the lifter spring causing the lifter to remain in the down position. The down position is against the can rod and as the cam rod rotates, this causes the lifter to break at the bottom and causing the can rod to also break which will cause an engine failure while drinking and the motor will freeze . All gmc and Chevrolet vehicles with this installed should be recalled. Everyone has been fixing it themselves by replacing the part(s) once a pinging noise is heard at 50,000 miles. Basically every 50,000 this will need to be fixed. Some people are turning off the 4 cylinder software to avoid the problem which in both cases, uses more gas and also idles higher.
NHTSA complaint #11639802
Aug 21, 2023unknown or other, fuel/propulsion system
Fuel leak at the fuel tank. Pulled tank from the truck, found the fuel pump housing was completely rusted out. Upon inspection of the pump housing, the high pressure line was rusted out and almost off the pump, causing gasoline to pump out and all over. After replacing this fuel pump I inspected the frame and found the frame looks like a frame off a truck that is 40 years old,… Read more
Fuel leak at the fuel tank. Pulled tank from the truck, found the fuel pump housing was completely rusted out. Upon inspection of the pump housing, the high pressure line was rusted out and almost off the pump, causing gasoline to pump out and all over. After replacing this fuel pump I inspected the frame and found the frame looks like a frame off a truck that is 40 years old, not a truck that is only 12 years old. The frame has heavy levels of rust down thru from the drivetrain back. There are spots that are rusted completely thru the frame where it looks like a crack down the frame. Most of the rust is on the bottom side or inside area of the frame. This area with the rust crack will have to be repaired very soon for safety of the vehicle, because if the frame would happen to fail where this crack is, the truck would fold in half, and if it is being driven on the interstate it would cause a major accident for sure. The rusting is so extensive that instead of repairing the spots, it would be more feasible to just go ahead and replace the whole back half of the truck frame. This is unacceptable for Chevrolet to use material that craps out so fast on trucks that are supposed to last many years, instead of falling apart long before they are even paid off. A 12 year old truck shouldn't have this extensive amount of rust damage to the frame. I would just fix the frame if this was commonplace for trucks, but my 2000 dodge ram has a frame far better then what is under my 2011 chevy