CarProblemsDB

2002 Chevrolet Silverado 1500 suspension problems

13 owners reported suspension problems — 3% of all 509 complaints about the 2002 Chevrolet Silverado 1500.

Suspension complaints by Chevrolet Silverado 1500 year

20261
20251
20243
20233
20226
202118
202019
201922
201833
201715
201630
201522
201447
201321
20129
201118
201010
20098
200818
200716
200629
200521
200413
200314
200213
200110
200023

What owners report

Nov 25, 2014suspension, power train, service brakes
Crested a small hill to see a red light with three cars in line. I depressed brake pedal, which went to the floor. The vehicle was stopped using the parking brake after swerving into empty lane of oncoming traffic in order to avoid hitting the line of cars from behind. Upon inspection, the front brake circuit was blown in the piping just aft of the front driver's side wheel.… Read more

Crested a small hill to see a red light with three cars in line. I depressed brake pedal, which went to the floor. The vehicle was stopped using the parking brake after swerving into empty lane of oncoming traffic in order to avoid hitting the line of cars from behind. Upon inspection, the front brake circuit was blown in the piping just aft of the front driver's side wheel. It is extremely difficult to stop a large truck with empty bed using only the rear brakes as they lock up easily. There seemed to be no brake power using the brake pedal, which is why the parking pedal was used. Even with a functional parking brake, the "failsafe" of having only one circuit is nearly useless given an empty truck bed (low rear-wheel traction) and a loss of pressure on the front circuit. In my opinion, losing the front brakes on a truck is catastrophic. In any event, in my case, the supposed fail-safe either did not work or was inconsequential. All of the hard lines (fuel and brake) on this vehicle are extremely corroded and are being replaced with stainless. This car spent the first five years of its life in oklahoma and missouri (where little to no salt is used) and moved to nh in 2006. The rear driver's side rocker panel is also rusted through and the frame has very significant rust, especially on the leaf spring hangers. In addition, the front driveshaft is rusted to the point that I will not operate the vehicle in 4wd until I replace it. This vehicle seems very susceptibl

NHTSA complaint #10660844
Jan 16, 2014suspension, fuel system, gasoline

State inspection my truck failed due to gasoline rusted and leaking gas,rear shackles rusted thru, parking break won't hold corrosion. I have never had so many rusted out parts on my truck before, the gas line should not rust thru this is a safety issue. Shackles rusted thru what gives my old 88 never had any of these problem please do a recall. *tr

NHTSA complaint #10560309
Aug 22, 2013steering, suspension, equipment
I have a 2002 chevy Silverado 1500 truck, and had a new set of tires (oem size), a new napa hub bearing assembly and a new napa inner tie rod. This work was professionally installed by a certified ase mechanic at a local repair shop on july 3, 2013. The tie rod failed on july 29, 2013. The hub bearing and the inner tie rod were replaced due to normal wear. Thankfully - this… Read more

I have a 2002 chevy Silverado 1500 truck, and had a new set of tires (oem size), a new napa hub bearing assembly and a new napa inner tie rod. This work was professionally installed by a certified ase mechanic at a local repair shop on july 3, 2013. The tie rod failed on july 29, 2013. The hub bearing and the inner tie rod were replaced due to normal wear. Thankfully - this happened while I was backing out of my driveway and not last weekend doing 70 MPH on the highway with my family in my truck. Failure of this part on the highway could have cost me my life, my family's lives and the lives of everyone else in my unintended path. Vehicle was "repaired" by the local shop in the driveway and they showed up with a replacement napa inner tie rod. I see on the box that this part is manufactured in china. I did not want that part on my vehicle and told them they could install it for a one-time trip to the shop but then I want it changed to another brand. They obliged and found another manufacturer. The napa part is es3478 - inner tie rod. *tr

NHTSA complaint #10536666
← All 2002 Chevrolet Silverado 1500 problems & recalls