CarProblemsDB

2002 BMW R1150GS brakes problems

12 owners reported brakes problems — 57% of all 21 complaints about the 2002 BMW R1150GS.

What owners report

Jun 4, 2004service brakes, hydraulic

This motorcycle is equipped with a linked ABS brake system. The rear wheel and front wheel work together. The motorcycle was without brakes for an undetermined period of time. *ak *nm

NHTSA complaint #10071616
Jul 8, 2003service brakes, hydraulic, power train

Final drive failure on BMW R1150GS motorcycle at 28,200 miles resulting in loss of oil and requiring complete final drive and ABS sensor replacement.*ak

NHTSA complaint #10025621
Feb 12, 2003service brakes, hydraulic

The brakes failed on the motorcycle.*ak *jb

NHTSA complaint #10006561
Sep 20, 2002service brakes, hydraulic

Bmwna has issued a tsb. They have made a correction for models after a certain VIN. They are not repairing earlier models affected by the part. This is a dangerous situation.no safety defect mentioned. *ak

NHTSA complaint #767460
Sep 3, 2002service brakes, hydraulic

Brakes occasionally completely release without warning

NHTSA complaint #766604
Sep 1, 2002service brakes, hydraulic
The front and rear brakes are linked on this motorcycle. When braking hard on rough road conditions, the excess force applied to the rear brake by the linked system can cause the ABS to modulate unexpectedly which has the effect of eliminating braking at a critical moment. I am concerned that this effect may cause me to have an accident at some time in the future. I am… Read more

The front and rear brakes are linked on this motorcycle. When braking hard on rough road conditions, the excess force applied to the rear brake by the linked system can cause the ABS to modulate unexpectedly which has the effect of eliminating braking at a critical moment. I am concerned that this effect may cause me to have an accident at some time in the future. I am aware that BMW redesigned the brakes to address this issue for models manufactured after mine was manufactured. Refere to BMW motorcycles service bulletin no: 34 001 02 (012). *ak

NHTSA complaint #766544
Aug 26, 2002service brakes, hydraulic

Rear disc brake is virtually impossible to modulate. Goes from off to full application within a 3/8" of pedal movement

NHTSA complaint #766221
Aug 26, 2002service brakes, hydraulic

Reference BMW service bulletin, dated march 2002, bulletin no: 34 001002 (012). My motorcycle is early VIN which has the ABS brake modulator that is to be replaced per this service bulletin. I want BMW to update my motorcycle's brake system per their service bulletin, cost to be covered by existing mfg. Warrantee.

NHTSA complaint #766209
Aug 26, 2002service brakes, hydraulic

ABS activates under normal braking on rough surface- the modulator senses incorrect information. Potentially life threatening situation on a motorcycle. BMW has issued a service bulletin in march 2002 #34-001-02(012) but will not repair under warranty or recall.

NHTSA complaint #766204
Aug 26, 2002service brakes, air

BMW-na know of unsafe operation problems in the ABS on models with VIN <ze87455. They have modified the system on more recent vins to correct the problems, but refuse to correct the system under warranty without mechanical breakdown of unit.*ak

NHTSA complaint #766217
Aug 24, 2002service brakes, hydraulic

While going over a series of bumps, the ABS system is causing the brakes to release. This causes an extremely unsafe situation. BMW has issued a service bulletin regarding this braking system, but refused to replace the ABS components until they fail. By then I could be killed. Please help force the manufacturer to replace these faulty brake components for all affected r1150rt owners.*ak

NHTSA complaint #766160
Aug 24, 2002service brakes, hydraulic
Two problems related to the integral ABS system: 1) the rear pedal is too sensitive and grabs the front brakes hard, causing unexpected stops and caused me to drop my bike once on the left side. Since then, I have had to refrain from using the rear pedal completely. 2) when braking hard, especially on downhill bumpy roads, the weight is transferred off the rear wheel,… Read more

Two problems related to the integral ABS system: 1) the rear pedal is too sensitive and grabs the front brakes hard, causing unexpected stops and caused me to drop my bike once on the left side. Since then, I have had to refrain from using the rear pedal completely. 2) when braking hard, especially on downhill bumpy roads, the weight is transferred off the rear wheel, causing the rear ABS to cycle. Occasionally, when braking very hard, when the rear ABS cycles, the front ABS also cycles causing a completely unexpected out-of-control condition. This has happened about ten times to me. I have not yet crashed the bike because of this, but I feel it's just a matter of time. I have run wide off onto the shoulder of the road a couple of times, and once ran wide over the centerline into the oncoming lane and was within a foot of colliding head-on into an suv. BMW has published a tsb (34-001-02 (012)) that implements a revised rear ABS modulator and caliper and all new production bikes get this fix. However BMW has refused to upgrade any older bikes for some reason. I feel this should be a recall, as it's a very dangerous design defect. It should also be noted that bmwna treats this tsb as a secret and has threatened to sue someone for posting a copy on his website. I am currently aware of at least eleven other owners who have complained to their dealer about this problem and have been told "sorry, but we will not fix the problem unless the part fails". I have a copy of t

NHTSA complaint #766148
← All 2002 BMW R1150GS problems & recalls