Jan 5, 2023exterior lighting
This car has factory hid xenon projector headlights. Over time the reflector bowls burned and melted from the heat of the light bulbs, causing some wire insulation to melt, and a brown film to cover all surfaces inside the headlight assembly. The brown coating makes the headlights dangerously dim. From various online searches, it appears this is a common failing of these… Read more
This car has factory hid xenon projector headlights. Over time the reflector bowls burned and melted from the heat of the light bulbs, causing some wire insulation to melt, and a brown film to cover all surfaces inside the headlight assembly. The brown coating makes the headlights dangerously dim. From various online searches, it appears this is a common failing of these headlights. BMW has not recalled these headlights, and replacements nearly exceed the value of the car.
NHTSA complaint #11500404
Sep 15, 2020exterior lighting
Right front low beam headlamp cuts out intermittently and eventually stops working due to cracked wiring inside the adjustable headlamp unit. For awhile, my headlight would stop working while making a right turn but then turn back on when straightened out. After two right turns, the headlight would cease to turn back on. Now (after several weeks of this happening) the… Read more
Right front low beam headlamp cuts out intermittently and eventually stops working due to cracked wiring inside the adjustable headlamp unit. For awhile, my headlight would stop working while making a right turn but then turn back on when straightened out. After two right turns, the headlight would cease to turn back on. Now (after several weeks of this happening) the headlight does not function at all, and I can see broken wiring if I look inside the headlight unit causing the issue.
NHTSA complaint #11355131
Jul 24, 2020electrical system, exterior lighting
The interior wires of the BMW e46 headlight assemblies have insulation material that readily breaks off of the wire, causing the bear wire conductor to be visible. This results in a failure of the headlights as the wires conductors are allowed to touch. This is also a possible source of a vehicle fire.
NHTSA complaint #11341318
Jul 22, 2020exterior lighting
Cheap wiring was used in the headlight units for specific cars with adaptive bi-xenon headlights. The wiring for these cars now has fallen apart, and disconnects. BMW's only way of fixing it is to replace the entire headlight unit, which costs around $2000 to replace a few wires that should cost less than $10. There are many cars on the road that this affects, which is a… Read more
Cheap wiring was used in the headlight units for specific cars with adaptive bi-xenon headlights. The wiring for these cars now has fallen apart, and disconnects. BMW's only way of fixing it is to replace the entire headlight unit, which costs around $2000 to replace a few wires that should cost less than $10. There are many cars on the road that this affects, which is a serious safety concern. Car owners are soldering wires by hand in an attempt to fix it but there is no long term solution.
NHTSA complaint #11340803
Mar 2, 2020electrical system, exterior lighting
Passenger side headlight assembly wires break and cause the headlight to stop emitting light or otherwise working. Repeated attempts to repair the wiring harness eventually fail. This occurs with mere normal use of the car and passage of time. The headlight assembly and bulb are still intact, but simply receive no power due to the broken wires. The assembly can fail at any… Read more
Passenger side headlight assembly wires break and cause the headlight to stop emitting light or otherwise working. Repeated attempts to repair the wiring harness eventually fail. This occurs with mere normal use of the car and passage of time. The headlight assembly and bulb are still intact, but simply receive no power due to the broken wires. The assembly can fail at any time, whether stationary, in motion, or on back roads or highways. When this issue is googled on this particular car, a 2004'2006 BMW 3 series e46 coupe with bi-xenon adaptive headlights, many many users report the same issue. No matter the condition, location, and service history of the car, the headlight assembly on the passenger side will always stop working simply because of the wiring. See: https://forum.e46fanatics.com/showthread.php?t=1073501 if repaired enough times, the assembly becomes unrepairable, at which point the user is stuck driving without a headlight, a dangerous situation to be in. Ordering an incredibly costly $1500 part to replace it is not only costly, but will eventually result in the same critical issue re-appearing because the design is inherently defective. This is a serious safety issue. Other costs include mechanics who insist to customers that the issue is both wiring and the bulb too, causing unsuspecting users to be charged extra for replacement bulbs and the associated labor as well. First occurrence on my car was april 2019, second was october 2019, and third wa
NHTSA complaint #11315498
Feb 17, 2020exterior lighting
There is a manufacturing defect in zkw xenon projector bowls used in e46 BMW cars. My headlights have become so dim that I constantly run fog lights at night to be able to see. Driving at night, especially in the rain, is very dangerous for me and other drivers. Zkw projector bowls are made of plastic, which are unable to stand up to the heat of xenon bulbs. Over time, they… Read more
There is a manufacturing defect in zkw xenon projector bowls used in e46 BMW cars. My headlights have become so dim that I constantly run fog lights at night to be able to see. Driving at night, especially in the rain, is very dangerous for me and other drivers. Zkw projector bowls are made of plastic, which are unable to stand up to the heat of xenon bulbs. Over time, they have become brown and cracked and do not reflect light on to the road. Al xenon projector bowls, also used in e46 bmws, do not have this issue. Zkw seems to have realized that their plastic bowls are not sufficient. The zkw projector bowls for e90 bmws are made of metal and do not have this issue. There is no affordable and sufficient oem repair for this issue. BMW only sells whole headlight assemblies, not just the projector bowls, which run hundreds of dollars each. Even then, replacing with zkw lights would eventually cause the same issue because of the insufficient design of the plastic bowls. The community is well aware of this issue. The only remedies are replace entire assemblies or retrofiting the headlights with aftermarket parts. Headlights are critical to driver safety and should not be this costly to keep working. These have failed prior to the life of the vehicle (mine is at 138k). This thread goes into detail for many people with this same issue: http://www.zhpmafia.com/forums/showthread.php?3598-the-zkw-burnt-bowls-thread there should be a recall for this dangerous issue caused
NHTSA complaint #11309655
Jan 16, 2020exterior lighting
Cheap plastic used in headlight projectors melt due to heat from oem xenon bulbs. This poses a fire safety hazard as well as low and eventually no light onto the road.
NHTSA complaint #11299989
Sep 10, 2018exterior lighting
The stock zkw projectors have burnt out and significantly reduce the quality of light emanating from the headlights. In order to have any true visibility, I have to hold the "flash-to-pass" lights on while I'm driving (a manual transmission). This is obviously a dangerous situation. The replacement assemblies are over $3,000 for the pair. That cost cannot be justified. I… Read more
The stock zkw projectors have burnt out and significantly reduce the quality of light emanating from the headlights. In order to have any true visibility, I have to hold the "flash-to-pass" lights on while I'm driving (a manual transmission). This is obviously a dangerous situation. The replacement assemblies are over $3,000 for the pair. That cost cannot be justified. I purchased the car a couple of months ago, but I, of course, did not test drive it at night (since it was summer). So I had no way of knowing about the deteriorated condition of the headlights. I cannot say for certain when this happened, but, based on internet searches, it appears to be a known issue that dates back to at least 2011.
NHTSA complaint #11128565
Jan 10, 2018exterior lighting
The oem xenon zkw brand lights had completely burnt reflector bulbs that caused low light to be emitted. This defect is due to plastic bowls being used instead of metal or another material. The damage could have caused a fire hazard or worse. I was forced to replace the lights at my own expense. I have attached photos of the damage and light output to this complaint. This occurred simply by having the headlights on.
NHTSA complaint #11061606
Dec 2, 2016exterior lighting
Zkw brand xenon headlamps have defective reflector bowls. The lights burn off all of the reflective surface causing the low/high beams to be so dim that driving at night is impossible. The part (reflector bowl) is not available as a replacement part, it can only be purchased as a whole headlight assembly for $1300 each light. This is a major safety issue, that I have… Read more
Zkw brand xenon headlamps have defective reflector bowls. The lights burn off all of the reflective surface causing the low/high beams to be so dim that driving at night is impossible. The part (reflector bowl) is not available as a replacement part, it can only be purchased as a whole headlight assembly for $1300 each light. This is a major safety issue, that I have just found out about. As we have been getting into winter and the daylight saving change cause earlier sunset times, I noticed my headlights were not very bright on the road. It hasn't been an issue that I noticed in past years due to my <1 mile commute, but this year I purchased a house 25mi from work and the amount of night driving has increased dramatically. I first adjusted the alignment of the lights to try to correct what I thought the issue was, and also have replaced one of the head light bulbs with no change. I found out about this issue on BMW forums all over the internet, and it seems to be extremely common. There needs to be a recall, or at least an oem replacement part available. *tr
NHTSA complaint #10929637
Nov 6, 2016exterior lighting
Low beam hid headlight projector made by zkw for BMW are poorly designed/made, unable to handle the heat output from the oem xenon bulbs, the part becomes severely scorched and degraded, reducing light output to unsafe levels. To compensate, fog lights have to be used to safely see the pavement. This is a very well documented issue with this manufacturer's product (zkw). BMW… Read more
Low beam hid headlight projector made by zkw for BMW are poorly designed/made, unable to handle the heat output from the oem xenon bulbs, the part becomes severely scorched and degraded, reducing light output to unsafe levels. To compensate, fog lights have to be used to safely see the pavement. This is a very well documented issue with this manufacturer's product (zkw). BMW had another manufacturer, al (automotive lighting), which didn't suffer from this problem.
NHTSA complaint #10924526
Oct 30, 2016exterior lighting
I recently purchased the vehicle and immediately noticed the poor light output from the factory xenons. I went online and found out that many people with the e46 sedan with xenon headlights manufactured by zkw have an issue of the projector bowls burning slowly over time due to poor material choice that cannot withstand the heat generated by the factory bulbs. Upon inspection… Read more
I recently purchased the vehicle and immediately noticed the poor light output from the factory xenons. I went online and found out that many people with the e46 sedan with xenon headlights manufactured by zkw have an issue of the projector bowls burning slowly over time due to poor material choice that cannot withstand the heat generated by the factory bulbs. Upon inspection of my headlights, I noticed that the bowls in my headlights were indeed both burnt and cracked and as a result of this, it is extremely difficult to see at night due to poor light output. I have resulted to using my fog lights as a supplementary light source just to see in the evenings and I find this unacceptable and negligent of BMW considering complaints have been made for years.
NHTSA complaint #10920112
Feb 29, 2016exterior lighting
Tl* the contact owns a 2004 BMW 330I. The contact noticed that the head lamp bulbs were burned out and a burning odor was detected. The contact replaced the head lamps independently. The vehicle was not taken to an independent mechanic or dealer to be diagnosed. The manufacturer was notified of the failure. The failure mileage was approximately 99,000. Updated 05/10/16*lj *tr
NHTSA complaint #10839007
Feb 16, 2016exterior lighting
Vehicle has very poor headlight visibility at night due to burnt out plastic reflector bowls from BMW's sub-supplier zkw. Replacement bowls are not available for purchase from BMW. Only fix from them is replacing the entire headlight assembly which costs thousands of dollars.
NHTSA complaint #10836340
Nov 10, 2015exterior lighting
Headlights no longer illuminate due to deteriorating headlight material considered a defect due to inferior plastic used when originally manufactured. Low illumination level creates a serious safety hazard to driver and public causing severe injuries and damage. The high cost of replacing these headlight assemblies cannot be burdened by the vehicle owners. Based on my… Read more
Headlights no longer illuminate due to deteriorating headlight material considered a defect due to inferior plastic used when originally manufactured. Low illumination level creates a serious safety hazard to driver and public causing severe injuries and damage. The high cost of replacing these headlight assemblies cannot be burdened by the vehicle owners. Based on my research this vehicle condition has been reported asking the governing entities to take action by recalling the vehicle and having the manufacturer correct the defect.
NHTSA complaint #10789580
Oct 27, 2015exterior lighting
Over the last couple of years I have noticed that the headlights ability to provide good visibility at night has reduced dramatically, especially when raining or wet roads. I made sure the lenses were clear and new bulbs did not help. After doing some research on the internet I found thru several forums that this is a common issue with bmws' equipped with the zkw brand of… Read more
Over the last couple of years I have noticed that the headlights ability to provide good visibility at night has reduced dramatically, especially when raining or wet roads. I made sure the lenses were clear and new bulbs did not help. After doing some research on the internet I found thru several forums that this is a common issue with bmws' equipped with the zkw brand of bi-xenon headlights. The reason is the projector bowels are made of plastic and over time burn due to the excessive heat generated by the xenon bulb.so much so that the reflector bowls turn black instead of silver and therefore cannot reflect the light produced by the bulb. The fog lights provide more light or if there is someone following me the car behind me provides far more light than my own car. This is a serious safety issue and should be subject to recall. The only way to remedy that I have found so far is to replace the projector bowls withe after market ones which requires some modifications at a cost of about $800. Us.
NHTSA complaint #10786505
Sep 4, 2015exterior lighting, visibility/wiper
The headlights are useless at night. The bulbs all function perfectly, but the reflector housings are "worn" according to my mechanic. I understand the need to replace bulbs over the lifetime of a vehicle, but $3,000 for a whole new headlight assembly is outrageous! This is a design defect that the NHTSA refuses to investigate. There are thousands of complaints regarding this… Read more
The headlights are useless at night. The bulbs all function perfectly, but the reflector housings are "worn" according to my mechanic. I understand the need to replace bulbs over the lifetime of a vehicle, but $3,000 for a whole new headlight assembly is outrageous! This is a design defect that the NHTSA refuses to investigate. There are thousands of complaints regarding this design defect all over the internet. This is a serious safety issue!
NHTSA complaint #10761627
Aug 1, 2015exterior lighting
Light output from my car is extremely poor causing a safety concern. Upon investigating why the light output is so poor, I have determined that like many others the lights fitted into this 2004 BMW 330I are manufactured for BMW by a company called zkw who used plastic for the reflector lenses for the hid assemblies. This plastic degrades and becomes burnt which significantly… Read more
Light output from my car is extremely poor causing a safety concern. Upon investigating why the light output is so poor, I have determined that like many others the lights fitted into this 2004 BMW 330I are manufactured for BMW by a company called zkw who used plastic for the reflector lenses for the hid assemblies. This plastic degrades and becomes burnt which significantly diminishes the light output, even from new oem bulbs that were installed in the car. A light meter indicates that these lights now have less than 50% of the light output of the same car using lights manufactured by al that BMW also used on these vehicles. Longevity of light output availability through lighting design and manufacture should not be considered a wear item by the vehicle maker. This is for the safety of both the vehicle owner and others on the road who may be subjected to a crash caused by poor visibility.
NHTSA complaint #10745516
Mar 24, 2015exterior lighting, visibility/wiper
The headlight reflectors on this car (and other of this year model) are manufactured by zkw and they have failed causing very low, unsafe levels of light output. The reflectors are burnt and cracked. The only way to get any reasonable or safe light output for night driving is to use the fog lights and this is an unsafe condition and I am surprised there hasn't been a recall.… Read more
The headlight reflectors on this car (and other of this year model) are manufactured by zkw and they have failed causing very low, unsafe levels of light output. The reflectors are burnt and cracked. The only way to get any reasonable or safe light output for night driving is to use the fog lights and this is an unsafe condition and I am surprised there hasn't been a recall. This is a well known problem. Unsafe lighting and proceed while unknowingly endangering themselves and others. Do not pass state inspection light out put in some states, this problem should be address, if you look on the inter net people are modifying them to give more light witch makes it more unsafe. *tr
NHTSA complaint #10701521
Jan 28, 2015exterior lighting
The low beams on my 2004 BMW 330I are very dim. They barely light up the road at night, if at all. My only option is to turn on my high beams, but then I risk blinding incoming traffic. I consider this a significant safety risk. Through online research I have discovered that the problem is that the bowls BMW used to reflect the light from the bulbs are made of plastic and get… Read more
The low beams on my 2004 BMW 330I are very dim. They barely light up the road at night, if at all. My only option is to turn on my high beams, but then I risk blinding incoming traffic. I consider this a significant safety risk. Through online research I have discovered that the problem is that the bowls BMW used to reflect the light from the bulbs are made of plastic and get burnt from the heat of the bulb. Due to this fact, I believe BMW should have a recall for the headlights of e46 cars. I do not think I should have to pay to fix something that is a factory defect. *tr
NHTSA complaint #10679358
Jan 21, 2015electrical system, exterior lighting, visibility/wiper
I purchased the car, I noticed the headlights where dim. I went out and got new bulbs for my car. I didn't help at all! I can barely see at night and I have to use to fog lights just to be able to drive at night. It is also unlawful to drive with my fog lights on. After much research, it seems that the root case of my headlight being as dim as they are, do to the reflective… Read more
I purchased the car, I noticed the headlights where dim. I went out and got new bulbs for my car. I didn't help at all! I can barely see at night and I have to use to fog lights just to be able to drive at night. It is also unlawful to drive with my fog lights on. After much research, it seems that the root case of my headlight being as dim as they are, do to the reflective bowl being burnt out in the headlight it unit. The cost to replace the lights is insane $1000.00 for a set, just to be able to see at night. It is unsafe to drive at night. It is so bad, that I often don't drive at night because I don't want to put my safe in a bad situation. *tr
NHTSA complaint #10676863
Jan 17, 2015exterior lighting
Purchased car used. Upon driving it at night for the first time the headlights were noticed to be very dim. Bulbs were checked to be the correct wattage and color temperature. Plastic reflector dish was seen to be burned out (not reflecting light from the portion above the bulb. *tr
NHTSA complaint #10676208
Jan 13, 2015exterior lighting
Tl* the contact owns a 2004 BMW 330I. While driving at an unknown speed, both projector headlights failed. The vehicle was taken to the dealer where it was diagnosed that the projector headlight lenses needed to be replaced. The vehicle was not repaired. The manufacturer was not notified of the failure. The approximate failure mileage was 190,000.
NHTSA complaint #10672197
Dec 26, 2014exterior lighting
Bi-xenon projector headlights have very poor illumination output and are unsafe. Apparently, the unit uses a plastic reflective bowl that burns over time due to the heat of the light bulb therefore losing its reflectibility. The standard halogen fog lamps in the lower bumper must be used as headlights because of the almost non existent output of the actual headlights. The only… Read more
Bi-xenon projector headlights have very poor illumination output and are unsafe. Apparently, the unit uses a plastic reflective bowl that burns over time due to the heat of the light bulb therefore losing its reflectibility. The standard halogen fog lamps in the lower bumper must be used as headlights because of the almost non existent output of the actual headlights. The only thing the bi-xenons are good for at this point is showing that a light is indeed on so that the police wont issue a citation. But as far as illuminating the road, they do not. *tr
NHTSA complaint #10668419
Dec 12, 2014exterior lighting
The headlight reflectors on this car (and other of this year model) are manufactured by zkw and they have failed causing very low, unsafe levels of light output. The reflectors are burnt and cracked. The only way to get any reasonable or safe light output for night driving is to use the fog lights and/or to hold on the pass to flash lights. This is an unsafe condition and I… Read more
The headlight reflectors on this car (and other of this year model) are manufactured by zkw and they have failed causing very low, unsafe levels of light output. The reflectors are burnt and cracked. The only way to get any reasonable or safe light output for night driving is to use the fog lights and/or to hold on the pass to flash lights. This is an unsafe condition and I am surprised there hasn't been a recall. This is a well known problem among some but most users will never realize what it casing poor, unsafe lighting and proceed while unknowingly endangering themselves and others. *tr
NHTSA complaint #10664011
Jul 26, 2014exterior lighting
The bi-xenon headlights no longer light up the road. It is a safety hazard and is a known issue with headlights manufactured by zkw on 2003-2005 BMW 330 models. The reflector bowls on these units burn out over time and reduce the headlights ability to reflect light. Driving at night is literally no better with the headlights on or off. I have to rely on my fog lights… Read more
The bi-xenon headlights no longer light up the road. It is a safety hazard and is a known issue with headlights manufactured by zkw on 2003-2005 BMW 330 models. The reflector bowls on these units burn out over time and reduce the headlights ability to reflect light. Driving at night is literally no better with the headlights on or off. I have to rely on my fog lights just to see anything. Please look into this safety issue as it is wide-spread. *tr
NHTSA complaint #10616511
Jun 12, 2014exterior lighting
The zkw xenon lights in the BMW e46 chasis have decreased light output. This makes night time driving dangerous and could result in a crash. The reflector bowl (that reflects light onto the road) is become badly burnt. This could also start a fire, as the piece is plastic. *tr
NHTSA complaint #10597871
Feb 18, 2014exterior lighting
On zkw-headlight equipped bi-xenon BMW 3-series, the low beam projector bowls are coated with faulty reflecting material that is burned off over time, dramatically reducing the output of the headlights. *tr
NHTSA complaint #10564757
Feb 5, 2014exterior lighting
The bowl of the oem zkw headlight burns out. It is first and foremost a safety hazard. BMW has produced countless cars that are affected, specifically any 3 series with the upgraded xenon headlights. Not only was this an additional option but the cost to rectify light output to a safe level is high. Oem headlights cost $1200 each at the dealership. I feel as though that is the… Read more
The bowl of the oem zkw headlight burns out. It is first and foremost a safety hazard. BMW has produced countless cars that are affected, specifically any 3 series with the upgraded xenon headlights. Not only was this an additional option but the cost to rectify light output to a safe level is high. Oem headlights cost $1200 each at the dealership. I feel as though that is the only way to approach this since headlights correlate directly with night driving and safety. *tr
NHTSA complaint #10563120
Dec 12, 2013exterior lightingFire
Tl* the contact owns a 2004 BMW 330I. The contact stated that the illumination of the headlights was extremely dim. The reflector was discolored and burned, causing improper illumination. The manufacturer was not made aware of the failure. The approximate failure mileage was 150,000. Mail out 01/13/15*lj
NHTSA complaint #10555831
Oct 4, 2013exterior lighting
The vehicle headlights include the bi-xenon option. Zkw was the original equipment supplier for these headlights. The reflective housing surrounding the bulb suffers from severe degradation and total light output is significantly reduced. Overall nighttime vehicle visibility and safety is greatly affected. I have learned this is a common problem with the make/model/year and option package of the vehicle. *tr
NHTSA complaint #10546748
Sep 20, 2013exterior lighting
I purchased the vehicle used with 155xxx miles on it and noticed that the headlights cannot sufficiently light up the road. Upon further inspection, the xenon projector-bowl housing inside the headlights are burnt. Light output is significantly reduced. The lights are manufactured by "zkw" *tr
NHTSA complaint #10544693
Jun 13, 2013exterior lighting
BMW e46 models have been known for this issue regarding hid/bixenon projector headlights loosing their ability to effectively light the road. My vehicle was equipped with the zkw (BMW brand/manufacture) headlight that BMW used and the reflector bowl for the projector headlamp was partially melted and burned significantly reducing the reflective surface for the headlights to… Read more
BMW e46 models have been known for this issue regarding hid/bixenon projector headlights loosing their ability to effectively light the road. My vehicle was equipped with the zkw (BMW brand/manufacture) headlight that BMW used and the reflector bowl for the projector headlamp was partially melted and burned significantly reducing the reflective surface for the headlights to function properly. After some investigation online this is a typical problem with this platform of the BMW 3 series and there is no resolution except complete replacement of the headlamp assembly. The reduced illumination was so bad, that my headlamps would be on at night but my fog lights projected more light on the road and were brighter requiring me to use them on a daily basis for light until I replaced my headlamp assemblies. Given this is a known issue and thousands of BMW e46 owners have to replace their complete headlamp assemblies the NHTSA needs to investigate and help remedy this situation as BMW should be responsible. Please note that BMW had two different suppliers for headlamp assemblies for this series BMW (al bosch and zkw). The al bosch lamps are not affected as they utilized metal projector/reflective bowls where the zkw (the affected supplier) used chromed plastic that burns/melts over time. *tr
NHTSA complaint #10519713
May 20, 2013exterior lighting
Projectors for the zkw headlights have deteriorated making night driving difficult and dangerous. *tr
NHTSA complaint #10512911
Jan 9, 2013exterior lighting
Burnt bowl in the headlights causing the xenon light to have diminished light output. Night driving is very difficult due to the headlight not being bright enough anymore. Replacement of the assemblies will only fix this temporarily until the bowls but again and the problem returned. *tr
NHTSA complaint #10492055
Dec 29, 2012exterior lighting
BMW e46 equipped with zkw brand headlights suffer from a burnt, melted, and cracked reflector bowl dramatically reducing the bi-xenon light output, making it difficult and unsafe to drive at night. This is a very common issue and needs to be resolved for drivers and others safety during night. *tr
NHTSA complaint #10490427
Oct 9, 2012exterior lighting, visibility/wiper
E46 BMW's with zkw xenon head lamps suffer from poor bulb projectors which burn to the point that light output is nearly none. This is defect is known by bmwna but nothing has been done to correct it. *tr
NHTSA complaint #10479375
Jul 31, 2012exterior lighting
It appears that a design defect has caused housings for bi-xenon headlights to be subject to heat stress, resulting in discoloration and cracking. As a result visibility during nighttime driving is significantly impacted when using both low-and high-beams. Approximate cost for replacement parts is in excess of $2,000, not including labor. *tr
NHTSA complaint #10468460
Jul 27, 2012exterior lighting
The headlights of the car get progressively dimmer over time. Changing headlight bulbs (xenon hid d2s 4300k) does nothing because the reflective coating on the headlight bowls has melted / burnt off. There is a scent of hot plastic with the headlights recently on and protective covers removed. The headlight bowls appear darkly charred just above the bulb area. *tr
NHTSA complaint #10468028
Jul 26, 2012exterior lighting
After purchasing my 330I in north salem, ny, I spent about 30 hours driving the car home to florida. I made it home late at night and pulled the car into my garage. Once inside, I noticed small wisps of smoke exiting the hood, just above each headlight. I opened the hood and smelled a faint burning plastic smell. Through online research and investigation on the vehicle, I… Read more
After purchasing my 330I in north salem, ny, I spent about 30 hours driving the car home to florida. I made it home late at night and pulled the car into my garage. Once inside, I noticed small wisps of smoke exiting the hood, just above each headlight. I opened the hood and smelled a faint burning plastic smell. Through online research and investigation on the vehicle, I found the projector headlight reflector bowls were severely 'burnt', something very common on these style headlights on this car. I researched more and found that these reflectors were made of plastic, and over time would overheat and burn, losing their reflective coating. This loss of reflective coating eventually leads to severely diminished light output. I researched how to replace or repair the lights, and eventually retrofitted newer metal projector bowls from a 2006+ BMW. This retrofit while not permanent, has helped. This is a very serious problem. In addition to the lack of headlight output, there is a serious fire hazard involved with this design flaw. *tr
NHTSA complaint #10467823